Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 495 - GSM-Forum

frankcelular1 · 01-27-2020, 19:55

Exe version: NCKBox AndroidMTK 2.4
Selected model: 0-By CPU ELBRUS
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[22]Detected: MediaTek PreLoader USB VCOM (Android) (COM22)
\\?\usb#vid_0e8d&pid_2000#6&321130f2&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[81]META Port Detected: MediaTek USB VCOM (Android) (COM81)
USB\VID_0E8D&PID_2007\6&321130F2&0&2
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6580,S01
[AP]APP_VER: ALTICE_S22_DS_O_T_L_V01.4_190221_MP
[mt6580,S01]Using Algo 1
[META]BaseBand CPU : MT6580B, E00
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V212.2
[META]HW_VER : SAGETEL_O1MP2_K80_BSP_HSPA_HW
[generic]Read simlock info.
Phone imei[1] : 354381100135x
Phone imei[2] : 354381100135x
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
[0]All done.

technomak · 01-28-2020, 10:28

Selected connection metod: Meta Connection
Exe version: NCKDongle AndroidMTK 2.6.5
Selected phone: A1010a20
Action : IMEI REPAIR.
IMEI[1] for write : 863448033885515
IMEI[2] for write : 863448033885523
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[40]Detected: MediaTek PreLoader USB VCOM (Android) (COM40)
\\?\usb#vid_0e8d&pid_2000#5&3b576742&0&9#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[170]META Port Detected: USB Serial Device (COM170)
USB\VID_17EF&PID_74ED&MI_02\6&2D52D1A6&0&0002
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6755,S01
[AP]APP_VER: alps-mp-m0.mp7-V2.3_lenovo6755.66c.m_P148
[mt6755,S01]Using Algo 3
Rebooting to meta, wait....
[META]BaseBand CPU : MT6755
[META]SW_VER : K52.ROW.M.LWG.V42
[META]HW_VER : LENOVO6755_66_M_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] x
Phone imei[1] : x
IMEI to repair: [2] x
Phone imei[2] : xx
Clean Boot flag ok.
[0]All done.

zaya21 · 01-29-2020, 16:20

i8 Exe version: NCKBox AndroidMTK 2.4
Selected connection metod: FLASH Mode
[47]META Port Detected: MediaTek USB VCOM (Android) (COM47)
USB\VID_0E8D&PID_2007\6&1BFC358E&0&4
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6580,S01
[AP]APP_VER: ALTICE_S12_DS_T_O_L_V02.0_190315_MP
[mt6580,S01]Using Algo 1
[META]BaseBand CPU : MT6580B, E00
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V212.2
[META]HW_VER : SAGETEL_O1MP2_K80_BSP_HSPA_HW
[generic]Read simlock info.
Phone imei[1] : 35xxxxxxxxxxxxx
Phone imei[2] : 35xxxxxxxxxxxxx
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
[0]All done.
:RE:RE

technomak · 01-29-2020, 17:06

Exe version: NCKDongle AndroidMTK 2.6.5
Selected model: Alcatel OT-5033D
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM39)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 5.
Helio MT6739 phone detected, swithing to helio api
Loading emmi from database
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100464E3632 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Phone have OTP partition.
MODEL FROM PROINFO: 5033D-2HALAEA
SECRO FROM PROINFO: X7L0HM00CT20
OTP IMEI: 354437102026610
Modem version: MOLY.LR12A.R2.MP.V18.P114
Starting alcatel helio frp, not disconnect phone untill done
[HELIO][frp]Format partition, please wait...
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

johnmadzeka1 · 02-05-2020, 09:18

Direct Unlock

Code:

Exe version: NCKDongle AndroidMTK 2.6.4 Selected model: 0-By CPU ELBRUS Action: Unlock Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [58]Detected: MediaTek PreLoader USB VCOM (Android) (COM58) \\?\usb#vid_0e8d&pid_2000#6&2b0a07fc&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [72]META Port Detected: MediaTek USB VCOM (Android) (COM72) USB\VID_0E8D&PID_2007\6&2B0A07FC&0&2 Start sync target, waiting responce..... [AP]BaseBand CPU : mt6580,S01 [AP]APP_VER: alps-mp-o1.mp2 [mt6580,S01]Using Algo 1 [META]BaseBand CPU : MT6580B, E00 [META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V238 [META]HW_VER : JOYA_O1MP2_K80_BSP_HSPA_HW [generic]Read simlock info. Phone imei[1] : 35973xxxxxxxxxxx Phone imei[2] : 35973xxxxxxxxxxx Start direct unlock[SIM1] Direct unlock done Start direct unlock[SIM2] Direct unlock done Clean Boot flag ok. [0]All done.

Tecnoservicel · 02-06-2020, 17:37

USB Connection selected.
Model Selected: 0-By CPU MT6223
EXE VERSION: NCKDongle MTK Tool 1.50
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM8
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM8)
BaseBand CPU : MT6261
SW_VER : G611M_FWP_YTL_SINGLE_6688_0001
HW_VER : GXQ61M_11C_HW
Meta mode conected ok, start reading phone....
User code(64) : 1122
User code reset :OK
META END OK.

denard · 02-07-2020, 17:14

Huawei panana CU unlock ok

Model Selected: 0-By CPU MT6223
EXE VERSION: NCKDongle MTK Tool 1.50
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM19
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM19)
BaseBand CPU : MT6236, E02
SW_VER : G7210SS.C236.M40.00.26
HW_VER : CKT36_10A_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 356961041788XXX
User code(128) : 1234
SIMLOCK INFO[1]:
Block1[N]: Locked (remain:9) Code : 37159116
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.

denard · 02-07-2020, 17:14

Huawei panana CU unlock ok

Model Selected: 0-By CPU MT6223
EXE VERSION: NCKDongle MTK Tool 1.50
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM19
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM19)
BaseBand CPU : MT6236, E02
SW_VER : G7210SS.C236.M40.00.26
HW_VER : CKT36_10A_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 356961041788XXX
User code(128) : 1234
SIMLOCK INFO[1]:
Block1[N]: Locked (remain:9) Code : 37159116
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.

denard · 02-08-2020, 14:43

Itel 1409 FRP Ok

EXE: NckDongle Spreadtrum Module 1.1
SELECTED: SC7731C_EMMC
ACTION: Erase FRP
Start Detect phone...
Detected: SPRD U2S Diag (COM86)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: Itel
Hardware: SP7731C_V1.0.0
Platform: sc8830
Board: sp7731ceb_it1409
Build Id: MRA58K
Model: itel it1409
Android Release: 6.0
Android Version: it1409-W406A-6.0-OP-V017-20170118
Security patch: 2016-12-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Total Time: 00:00:17
Done.

denard · 02-08-2020, 14:43

Itel 1409 FRP Ok

EXE: NckDongle Spreadtrum Module 1.1
SELECTED: SC7731C_EMMC
ACTION: Erase FRP
Start Detect phone...
Detected: SPRD U2S Diag (COM86)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: Itel
Hardware: SP7731C_V1.0.0
Platform: sc8830
Board: sp7731ceb_it1409
Build Id: MRA58K
Model: itel it1409
Android Release: 6.0
Android Version: it1409-W406A-6.0-OP-V017-20170118
Security patch: 2016-12-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Total Time: 00:00:17
Done.

tyking5 · 02-12-2020, 03:15

bro mine shows under port qualcomm and not mediaTex?

kalinichenko · 02-12-2020, 09:17

Alcatel 40440 unlock done

Quote:

\viewkind4\uc1\pard\f0\fs20 Exe Version: NckDongle Qualcomm Module 0.12.6
\par Operation: Unlock phone.
\par Searching for phone.....
\par HS-USB Diagnostics 9008 (COM10) detected.
\par Hello received.
\par HW ID: 24004200E1009600 MSM8909
\par PK HASH: 5B4E559E6E66D5BA8BE6267CD83376EB2EB3717D1DD3436A63 90165B0C78CC7B
\par Arhitecture:32 bits
\par [32]Sending loader, please wait..
\par Waiting for loader to start...
\par [1] Send NOP ok, loader start.
\par CPU: MSM8909
\par MaxPayloadSizeFromTargetInBytes: 4096
\par MaxPayloadSizeToTargetInBytes: 8192
\par Reading partition info, wait.
\par Volume[0] Size: 3.53 GB Partitions count: 38
\par [001CF7DF]Userdata Size: 926.98 MB
\par Manufacturer: unknown
\par Cpu: armeabi-v7a
\par Build Id: MMB29M
\par Model: Cingular Flip 2
\par Android Release: 6.0.1
\par Android Version: MMB29M test-keys
\par Config: diag,serial_smd,rmnet_qti_bam,adb
\par Security patch: xxxx-xx-xx
\par IMEI: 014685004838019
\par Model: 4044O-2BAQUS1-R
\par Step 1 ok.
\par Processing.
\par Processing.
\par Writing simlock.
\par Writing simlock ok.
\par Restarting phone.....
\par *************************************
\par
\par }

zaya21 · 02-13-2020, 23:28

Exe Version: NckBox Qualcomm Module 0.12.6
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM18) detected.
Hello received.
HW ID: 00000400E1009600 MSM8909
PK HASH: 86C4F630CBC412FD52CAA4110179F89A14670D1D01757D9111 7E0167D4AF3F37
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8909
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 7,28 GB Partitions count: 30
[006AFFDF]Userdata Size: 3,34 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....

Trapbay · 02-19-2020, 18:32

Exe version: NCKBox AndroidMTK 2.1
Selected model: 0-By CPU ELBRUS
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
BBCHIP: 8163 1 cb00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT8163
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 256 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: 13014E51324A333643 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

sasfido · 02-25-2020, 21:12

LAVA IRIS 51 FRP DONE

Phone Storage: EMMC
EXE: NckDongle Spreadtrum Module 1.1
SELECTED: SC7731C_EMMC
ACTION: Erase FRP
Custom loader: BLU_C050_V8.1.G.03.05_GENERIC_27-07-2018_1801.loader
Start Detect phone...
Detected: SPRD U2S Diag (COM17)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: LAVA
Hardware: sc7731e_1h10_v1.1.0
Build Id: OPM2.171019.012
Model: iris51
Android Release: 8.1.0
Android Version: LAVA_iris51_1_8_S120_INT_18K01
Security patch: 2018-11-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Total Time: 00:00:22
Done.

01-27-2020, 19:55	#7411 (permalink)
frankcelular1 No Life Poster Join Date: Dec 2008 Location: just around Posts: 1,779 Member: 914220 Status: Offline Thanks Meter: 206	altice s22 unlock success Exe version: NCKBox AndroidMTK 2.4 Selected model: 0-By CPU ELBRUS Action: Unlock Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [22]Detected: MediaTek PreLoader USB VCOM (Android) (COM22) \\?\usb#vid_0e8d&pid_2000#6&321130f2&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [81]META Port Detected: MediaTek USB VCOM (Android) (COM81) USB\VID_0E8D&PID_2007\6&321130F2&0&2 Start sync target, waiting responce..... [AP]BaseBand CPU : mt6580,S01 [AP]APP_VER: ALTICE_S22_DS_O_T_L_V01.4_190221_MP [mt6580,S01]Using Algo 1 [META]BaseBand CPU : MT6580B, E00 [META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V212.2 [META]HW_VER : SAGETEL_O1MP2_K80_BSP_HSPA_HW [generic]Read simlock info. Phone imei[1] : 354381100135x Phone imei[2] : 354381100135x Start direct unlock[SIM1] Direct unlock done Start direct unlock[SIM2] Direct unlock done Clean Boot flag ok. [0]All done.

01-28-2020, 10:28	#7412 (permalink)
technomak No Life Poster Join Date: Sep 2013 Location: KERALA, INDIA Posts: 1,053 Member: 2035802 Status: Offline Sonork: 100.1675827 Thanks Meter: 789	Lenovo a7020a48 IMEI repair done Selected connection metod: Meta Connection Exe version: NCKDongle AndroidMTK 2.6.5 Selected phone: A1010a20 Action : IMEI REPAIR. IMEI[1] for write : 863448033885515 IMEI[2] for write : 863448033885523 Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [40]Detected: MediaTek PreLoader USB VCOM (Android) (COM40) \\?\usb#vid_0e8d&pid_2000#5&3b576742&0&9#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [170]META Port Detected: USB Serial Device (COM170) USB\VID_17EF&PID_74ED&MI_02\6&2D52D1A6&0&0002 Start sync target, waiting responce..... [AP]BaseBand CPU : mt6755,S01 [AP]APP_VER: alps-mp-m0.mp7-V2.3_lenovo6755.66c.m_P148 [mt6755,S01]Using Algo 3 Rebooting to meta, wait.... [META]BaseBand CPU : MT6755 [META]SW_VER : K52.ROW.M.LWG.V42 [META]HW_VER : LENOVO6755_66_M_HW Meta mode conected ok, start reading phone.... IMEI to repair: [1] x Phone imei[1] : x IMEI to repair: [2] x Phone imei[2] : xx Clean Boot flag ok. [0]All done.

01-29-2020, 16:20	#7413 (permalink)
zaya21 Freak Poster Join Date: Jul 2018 Posts: 110 Member: 2851505 Status: Offline Sonork: 100.750600 Thanks Meter: 22	unlock altice s12 to select altice S20 i8 Exe version: NCKBox AndroidMTK 2.4 Selected connection metod: FLASH Mode [47]META Port Detected: MediaTek USB VCOM (Android) (COM47) USB\VID_0E8D&PID_2007\6&1BFC358E&0&4 Start sync target, waiting responce..... [AP]BaseBand CPU : mt6580,S01 [AP]APP_VER: ALTICE_S12_DS_T_O_L_V02.0_190315_MP [mt6580,S01]Using Algo 1 [META]BaseBand CPU : MT6580B, E00 [META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V212.2 [META]HW_VER : SAGETEL_O1MP2_K80_BSP_HSPA_HW [generic]Read simlock info. Phone imei[1] : 35xxxxxxxxxxxxx Phone imei[2] : 35xxxxxxxxxxxxx Start direct unlock[SIM1] Direct unlock done Start direct unlock[SIM2] Direct unlock done Clean Boot flag ok. [0]All done. :RE:RE

01-29-2020, 17:06	#7414 (permalink)
technomak No Life Poster Join Date: Sep 2013 Location: KERALA, INDIA Posts: 1,053 Member: 2035802 Status: Offline Sonork: 100.1675827 Thanks Meter: 789	Alcatel 5033D FRP reset done Exe version: NCKDongle AndroidMTK 2.6.5 Selected model: Alcatel OT-5033D [auto]Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port (COM39) Boot mode: Brom Phone detected...Please wait BBCHIP: 6739 2 cb00 Using Algo 5. Helio MT6739 phone detected, swithing to helio api Loading emmi from database Helio enabled DRAM in First Da: TRUE Sending loader..... BBCHIP MT6739 [1]Storage EMMC EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 150100464E3632 : 000000000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2880000 [7.290 GB] Phone have OTP partition. MODEL FROM PROINFO: 5033D-2HALAEA SECRO FROM PROINFO: X7L0HM00CT20 OTP IMEI: 354437102026610 Modem version: MOLY.LR12A.R2.MP.V18.P114 Starting alcatel helio frp, not disconnect phone untill done [HELIO][frp]Format partition, please wait... [0]FRP Reset Done. [helio]Wait untill phone will start charging. [0]All done.

02-06-2020, 17:37	#7416 (permalink)
Tecnoservicel Insane Poster Join Date: Dec 2018 Location: Venezuela Posts: 78 Member: 2885644 Status: Offline Thanks Meter: 29	Unlock Phone pattern lock phone MTK generic done! USB Connection selected. Model Selected: 0-By CPU MT6223 EXE VERSION: NCKDongle MTK Tool 1.50 Connect phone in boot mode ... USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM8 Phone detected...Please wait Conected ok with target ... Reopen comport(COM8) BaseBand CPU : MT6261 SW_VER : G611M_FWP_YTL_SINGLE_6688_0001 HW_VER : GXQ61M_11C_HW Meta mode conected ok, start reading phone.... User code(64) : 1122 User code reset :OK META END OK.

02-07-2020, 17:14	#7417 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	Huawei panana CU unlock ok Model Selected: 0-By CPU MT6223 EXE VERSION: NCKDongle MTK Tool 1.50 Connect phone in boot mode ... USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM19 Phone detected...Please wait Conected ok with target ... Reopen comport(COM19) BaseBand CPU : MT6236, E02 SW_VER : G7210SS.C236.M40.00.26 HW_VER : CKT36_10A_HW Meta mode conected ok, start reading phone.... Phone imei[1] : 356961041788XXX User code(128) : 1234 SIMLOCK INFO[1]: Block1[N]: Locked (remain:9) Code : 37159116 Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked META END OK. All done.

02-07-2020, 17:14	#7418 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	Huawei panana CU unlock ok Model Selected: 0-By CPU MT6223 EXE VERSION: NCKDongle MTK Tool 1.50 Connect phone in boot mode ... USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM19 Phone detected...Please wait Conected ok with target ... Reopen comport(COM19) BaseBand CPU : MT6236, E02 SW_VER : G7210SS.C236.M40.00.26 HW_VER : CKT36_10A_HW Meta mode conected ok, start reading phone.... Phone imei[1] : 356961041788XXX User code(128) : 1234 SIMLOCK INFO[1]: Block1[N]: Locked (remain:9) Code : 37159116 Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked META END OK. All done.

02-08-2020, 14:43	#7419 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	Itel 1409 FRP Ok EXE: NckDongle Spreadtrum Module 1.1 SELECTED: SC7731C_EMMC ACTION: Erase FRP Start Detect phone... Detected: SPRD U2S Diag (COM86) Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. FileSystem: EMMC Manufacturer: Itel Hardware: SP7731C_V1.0.0 Platform: sc8830 Board: sp7731ceb_it1409 Build Id: MRA58K Model: itel it1409 Android Release: 6.0 Android Version: it1409-W406A-6.0-OP-V017-20170118 Security patch: 2016-12-05 This phone have frp partition. Removing frp, wait... Format OK. Total Time: 00:00:17 Done.

02-08-2020, 14:43	#7420 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	Itel 1409 FRP Ok EXE: NckDongle Spreadtrum Module 1.1 SELECTED: SC7731C_EMMC ACTION: Erase FRP Start Detect phone... Detected: SPRD U2S Diag (COM86) Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. FileSystem: EMMC Manufacturer: Itel Hardware: SP7731C_V1.0.0 Platform: sc8830 Board: sp7731ceb_it1409 Build Id: MRA58K Model: itel it1409 Android Release: 6.0 Android Version: it1409-W406A-6.0-OP-V017-20170118 Security patch: 2016-12-05 This phone have frp partition. Removing frp, wait... Format OK. Total Time: 00:00:17 Done.

02-12-2020, 03:15	#7421 (permalink)
tyking5 Freak Poster Join Date: Jul 2014 Location: Marshall Islands Posts: 192 Member: 2215160 Status: Offline Sonork: unlocki2018 Thanks Meter: 32	bro mine shows under port qualcomm and not mediaTex?

02-13-2020, 23:28	#7423 (permalink)
zaya21 Freak Poster Join Date: Jul 2018 Posts: 110 Member: 2851505 Status: Offline Sonork: 100.750600 Thanks Meter: 22	frp zte z835 successful Exe Version: NckBox Qualcomm Module 0.12.6 Operation: Reset FRP Searching for phone..... Qualcomm HS-USB QDLoader 9008 (COM18) detected. Hello received. HW ID: 00000400E1009600 MSM8909 PK HASH: 86C4F630CBC412FD52CAA4110179F89A14670D1D01757D9111 7E0167D4AF3F37 Checking database for suitable loader..... Arhitecture:32 bits [32]Sending loader, please wait.. Waiting for loader to start... [1] Send NOP ok, loader start. CPU: MSM8909 MaxPayloadSizeFromTargetInBytes: 4096 MaxPayloadSizeToTargetInBytes: 8192 Reading partition info, wait. Volume[0] Size: 7,28 GB Partitions count: 30 [006AFFDF]Userdata Size: 3,34 GB Erasing FRP, wait..... Erasing FRP, finished Restarting phone.....

02-19-2020, 18:32	#7424 (permalink)
Trapbay Freak Poster Join Date: Nov 2018 Location: Everywhere Your Not Posts: 499 Member: 2875052 Status: Offline Thanks Meter: 211	Onn tablet ona19tb002 frp done Exe version: NCKBox AndroidMTK 2.1 Selected model: 0-By CPU ELBRUS [auto]Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM5) Boot mode: Preloader BBCHIP: 8163 1 cb00 Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT8163 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 256 KB SDRAM EXT RAM: 2 GB DRAM ---------------------------------------------------- EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE EMMC FW VERSION: 10:00:00:00:00:00:00:00 EMMC CID: 13014E51324A333643 : 00000000000000 EMMC UA SIZE: 0x3ab400000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3ac000000 [14.688 GB] Checking data, wait... Writing FRP, wait... FRP Reset Done. Wait untill phone will start charging. [0]All done.

02-25-2020, 21:12	#7425 (permalink)
sasfido Freak Poster Join Date: Apr 2007 Location: ZANZIBAR Posts: 461 Member: 496694 Status: Offline Thanks Meter: 95	LAVA IRIS 51 FRP DONE Phone Storage: EMMC EXE: NckDongle Spreadtrum Module 1.1 SELECTED: SC7731C_EMMC ACTION: Erase FRP Custom loader: BLU_C050_V8.1.G.03.05_GENERIC_27-07-2018_1801.loader Start Detect phone... Detected: SPRD U2S Diag (COM17) Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. FileSystem: EMMC Manufacturer: LAVA Hardware: sc7731e_1h10_v1.1.0 Build Id: OPM2.171019.012 Model: iris51 Android Release: 8.1.0 Android Version: LAVA_iris51_1_8_S120_INT_18K01 Security patch: 2018-11-05 This phone have frp partition. Removing frp, wait... Format OK. Total Time: 00:00:22 Done.