Report Bugs and issues with NCK Box / Dongle PREMIUM v2 - HERE - Page 90 - GSM-Forum

zakaria70 · 02-23-2019, 21:36

I WANA TO THANK YOU FOR YOUR PATIENCE
EXCUSE ME I AM NEWER AND CONFUSED
THE LAST QUESTION
IS NCK Dongle / Pro Android MTK Module v2.5.9.8 THE SAME THING WITH
THE INSTALLER I HAVE NCK BOX AndroidMTK Module 1.8.9.8 ?
ACCEPT EXCUSES
BEST REGARDS

**orbita** · 02-23-2019, 22:07

We maked exe to open for you compatible section.
If you see nckbox installers, then you have nckbox, and must use this installers.
If you see nckdongle installers, then you have nckdongle, and must use this installers.
Installers is not compatible, you must use only compatible installer.

zakaria70 · 02-24-2019, 13:57

Quote:

Originally Posted by orbita

we maked exe to open for you compatible section.
If you see nckbox installers, then you have nckbox, and must use this installers.
If you see nckdongle installers, then you have nckdongle, and must use this installers.
Installers is not compatible, you must use only compatible installer.

now its very clear
but the problem now,
i have nck pro dongle,
from the exe you maked i see only nckbox installer
this what make me confused from the beginning
https://i.imgur.com/fPoFHeC.png

**orbita** · 02-24-2019, 14:30

Acces autodetect card and open right section.
If you see nckbox installers, this meen you have nckbox card.

Supported features is same for nckbox and nckdongle, so is ok.
Nckbox smart card usually come with box hardware, posible reseller maked some mistake.

zakaria70 · 02-24-2019, 14:40

Quote:

Originally Posted by orbita

acces autodetect card and open right section.
If you see nckbox installers, this meen you have nckbox card.

Supported features is same for nckbox and nckdongle, so is ok.
Nckbox smart card usually come with box hardware, posible reseller maked some mistake.

so is ok ?
Can i work with it no problem?

**orbita** · 02-24-2019, 15:38

If exe open ok, sure.

zakaria70 · 02-25-2019, 18:14

Quote:

Originally Posted by orbita

If exe open ok, sure.

HI SIR
ALL MODULES OPEN OK
ONLY NOKIA MODULE SHOWS
error check seurite certificate, will exit now

luzer · 03-13-2019, 22:53

ZTE Blade A520 .....

Quote:

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.9.2
Selected model: MT6737M
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[5]Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
\\?\usb#vid_0e8d&pid_2000#5&34b1332a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[5]META Port Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
USB\VID_0E8D&PID_2000\5&34B1332A&0&3
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6737m,S01
[AP]APP_VER: alps-mp-n0.mp1-V1.0.2_zte6737m.35g.n_P125
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V110.5.P52
[META]HW_VER : ZTE6737M_65_N_HW
Phone imei[1] : 86568303-------
Start direct unlock[SIM1]
Direct unlock done
Clean Boot flag ok.

------------------

Exe version: NCKDongle AndroidMTK 2.5.9.8
Selected model: 0-By CPU MT6737M
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[5]Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
\\?\usb#vid_0e8d&pid_2000#5&34b1332a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[5]META Port Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
USB\VID_0E8D&PID_2000\5&34B1332A&0&3
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6737m,S01
[AP]APP_VER: alps-mp-n0.mp1-V1.0.2_zte6737m.35g.n_P125
Making target channel configuration, wait...
Making tunnel configuration, wait...
[1]Tunnel configuration fail, aborting...
[0]All done.

Quote:

Exe version: NCKDongle AndroidMTK 2.5.9.8
Selected model: 0-By CPU MT6737M
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[5]Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
\\?\usb#vid_0e8d&pid_2000#5&34b1332a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[5]META Port Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
USB\VID_0E8D&PID_2000\5&34B1332A&0&3
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6737m,S01
[AP]APP_VER: alps-mp-n0.mp1-V1.0.2_zte6737m.35g.n_P125
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V110.5.P52
[META]HW_VER : ZTE6737M_65_N_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 86568303------
Simlock Info : Sim [1]
Block1[N] :Locked [remain:10] Code : 4997352742355196
Block2[NS] :Unlocked Code: 56781234
Block3[SP] :Unlocked Code: 11112222
Block4[C] :Unlocked Code: 33334444
Block5[SIM]:Unlocked Code: 55556666
**************************************

1.Power phone with unacepted simcard.
2.Type code code when phone ask about.
3.For advansed info power phone with original card.
4.Type *#*#3646633#*#* and from engeneering menu select SIMMELOCK

If phone relock after power off, enter unlock code and make wipe.
[0]All done.

-----------

Exe version: NCKDongle AndroidMTK 2.5.9.8
Selected model: Zte Blade A520
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[5]Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
\\?\usb#vid_0e8d&pid_2000#5&34b1332a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[5]META Port Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
USB\VID_0E8D&PID_2000\5&34B1332A&0&3
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6737m,S01
[AP]APP_VER: alps-mp-n0.mp1-V1.0.2_zte6737m.35g.n_P125
Making target channel configuration, wait...
Making tunnel configuration, wait...
[1]Tunnel configuration fail, aborting...
[0]All done.

-----------

Exe version: NCKDongle AndroidMTK 2.5.9.8
Selected model: Zte Blade A520
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[5]Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
\\?\usb#vid_0e8d&pid_2000#5&34b1332a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[5]META Port Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
USB\VID_0E8D&PID_2000\5&34B1332A&0&3
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6737m,S01
[AP]APP_VER: alps-mp-n0.mp1-V1.0.2_zte6737m.35g.n_P125
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V110.5.P52
[META]HW_VER : ZTE6737M_65_N_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 865683033349652
Simlock Info : Sim [1]
Block1[N] :Locked [remain:10] Code : 4997352742355196
Block2[NS] :Unlocked Code: 56781234
Block3[SP] :Unlocked Code: 11112222
Block4[C] :Unlocked Code: 33334444
Block5[SIM]:Unlocked Code: 55556666
**************************************

1.Power phone with unacepted simcard.
2.Type code code when phone ask about.
3.For advansed info power phone with original card.
4.Type *#*#3646633#*#* and from engeneering menu select SIMMELOCK

If phone relock after power off, enter unlock code and make wipe.
[0]All done.

*Diablo* · 03-30-2019, 12:47

Hello Nck Dongle team.
I have paid update license 4 month ago. But few days ago i received license expired message when run software.
Reseller dont know why.

**orbita** · 03-30-2019, 13:35

Official resellers usually have direct contact with us, so is really imposible to be like you say.
Posible reseller is not official or you hide some.
Send me card sn in pm and will check.

01Relocked · 03-30-2019, 20:08

please fix stop button proble in MTK module
Since sometimes happens mtk preloader drivers gets stucks, so is a must stop the process and start again but mtk module has problem with stop button in firmware section on MTK module

support access is with double ss not with one s

please correct that!

**orbita** · 04-01-2019, 12:49

Quote:

Originally Posted by 01Relocked

please fix stop button proble in MTK module
Since sometimes happens mtk preloader drivers gets stucks, so is a must stop the process and start again but mtk module has problem with stop button in firmware section on MTK module

support access is with double ss not with one s

please correct that!

Exe have million+ lines of code, and yes, sometimes exists mistakes, we are human.
But thanks for your concern about grammar.

preloader drivers gets stucks
fix stop button problem in MTK module
stop button in firmware[tab] section

bonyaminazad · 04-23-2019, 12:57

Error[0x178e]: S_SECURITY_GET_SEC_CONFIG_FAIL

plz help

Tecnoservicel · 08-11-2019, 22:31

hello I formatted my computer and reinstalled all the modules but the samsung module gives me error installing on windows 7 32 bit ultimate

chiboy2090 · 08-12-2019, 16:40

please help for 3days I have not been able to open any of the dongle exe, telling me to update the main module, after updating the main exe,when I try to open the mtk exe,I will still get the message update the main exe

08-11-2019, 22:31	#1349 (permalink)
Tecnoservicel Insane Poster Join Date: Dec 2018 Location: Venezuela Posts: 78 Member: 2885644 Status: Offline Thanks Meter: 29	modulo samsung no install hello I formatted my computer and reinstalled all the modules but the samsung module gives me error installing on windows 7 32 bit ultimate

08-12-2019, 16:40	#1350 (permalink)
chiboy2090 Junior Member Join Date: Apr 2017 Location: Nigeria, lagos Posts: 12 Member: 2710856 Status: Offline Thanks Meter: 2	NCKdongle please help for 3days I have not been able to open any of the dongle exe, telling me to update the main module, after updating the main exe,when I try to open the mtk exe,I will still get the message update the main exe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
IR between 6150 and IBM TP 600	favdijck	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-15-2011 13:08
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
wt603 and .pkd	ARt	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-13-1999 19:18
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

02-23-2019, 21:36	#1336 (permalink)
zakaria70 Freak Poster Join Date: Apr 2017 Location: algeria Posts: 255 Member: 2704296 Status: Offline Sonork: 100.1677478 Thanks Meter: 30	I WANA TO THANK YOU FOR YOUR PATIENCE EXCUSE ME I AM NEWER AND CONFUSED THE LAST QUESTION IS NCK Dongle / Pro Android MTK Module v2.5.9.8 THE SAME THING WITH THE INSTALLER I HAVE NCK BOX AndroidMTK Module 1.8.9.8 ? ACCEPT EXCUSES BEST REGARDS

02-23-2019, 22:07	#1337 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	We maked exe to open for you compatible section. If you see nckbox installers, then you have nckbox, and must use this installers. If you see nckdongle installers, then you have nckdongle, and must use this installers. Installers is not compatible, you must use only compatible installer.

02-24-2019, 14:30	#1339 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Acces autodetect card and open right section. If you see nckbox installers, this meen you have nckbox card. Supported features is same for nckbox and nckdongle, so is ok. Nckbox smart card usually come with box hardware, posible reseller maked some mistake.

02-24-2019, 15:38	#1341 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	If exe open ok, sure.

03-30-2019, 12:47	#1344 (permalink)
Diablo No Life Poster Join Date: Mar 2004 Location: pccomp Age: 42 Posts: 1,399 Member: 59173 Status: Offline Sonork: 100.1585568 Thanks Meter: 225	Hello Nck Dongle team. I have paid update license 4 month ago. But few days ago i received license expired message when run software. Reseller dont know why.

03-30-2019, 13:35	#1345 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Official resellers usually have direct contact with us, so is really imposible to be like you say. Posible reseller is not official or you hide some. Send me card sn in pm and will check.

03-30-2019, 20:08	#1346 (permalink)
01Relocked Insane Poster Join Date: Feb 2016 Location: Honduras Age: 28 Posts: 90 Member: 2529300 Status: Offline Thanks Meter: 37	please fix stop button proble in MTK module Since sometimes happens mtk preloader drivers gets stucks, so is a must stop the process and start again but mtk module has problem with stop button in firmware section on MTK module support access is with double ss not with one s please correct that!

04-23-2019, 12:57	#1348 (permalink)
bonyaminazad Junior Member Join Date: Nov 2013 Location: satkhira Age: 38 Posts: 8 Member: 2072494 Status: Offline Thanks Meter: 4	Error[0x178e]: S_SECURITY_GET_SEC_CONFIG_FAIL plz help