Unlock verykool s135 [ANSWERED-UNLOCKED] - GSM-Forum

Punto-Móvil · 03-12-2014, 21:34

Hi there team
Any solution for this phone verykool s135 ?
Phone from Claro Santo Domingo
I have phone in hands if you need any tests.

here is log of read code but wrong nck.
Connect phone in boot mode ...
Start detecting port..
Com port ok : COM318
Phone detected...Please wait
Conected ok with target ...
BaseBand CPU : MT6276
SW Version : MAUI.11B.W11.44.MP.V8.F3
HW Version : MIKI76_11B_GEMINI_HW
Reopen comport(COM318)
Meta mode conected ok, start reading phone....
Phone imei : 865081004801977

Block1(N) : Locked (remain:3) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C) : Unlocked

Backup saved to : C:\NCK Dongle\NCK Dongle Generic Flash tool Module\backup\_simlock_865081004801977.nsb
META END OK.
All done.

Best Regards
Punto-Movil

**Fast Unlocking** · 03-12-2014, 21:35

Quote:

Originally Posted by Punto-Móvil

Hi there team
Any solution for this phone verykool s135 ?
Phone from Claro Santo Domingo
I have phone in hands if you need any tests.

here is log of read code but wrong nck.
Connect phone in boot mode ...
Start detecting port..
Com port ok : COM318
Phone detected...Please wait
Conected ok with target ...
BaseBand CPU : MT6276
SW Version : MAUI.11B.W11.44.MP.V8.F3
HW Version : MIKI76_11B_GEMINI_HW
Reopen comport(COM318)
Meta mode conected ok, start reading phone....
Phone imei : 865081004801977

Block1(N) : Locked (remain:3) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C) : Unlocked

Backup saved to : C:\NCK Dongle\NCK Dongle Generic Flash tool Module\backup\_simlock_865081004801977.nsb
META END OK.
All done.

Best Regards
Punto-Movil

try this method pls , Put unaccepted sim card inside phone, And read codes again.

and post results here pls

**orbita** · 03-12-2014, 22:52

Try to make direct unlock.
Must be ok, if read supported, must be unlock supported also.
If not accepted unlock select any model what accept direct unlock.
Doro phones, huawei 6600, zte r3100 and so on.
Post result here.

Punto-Móvil · 03-13-2014, 10:52

log read info with non accepted sim cardb

Connect phone in boot mode ...
Start detecting port..
Com port ok : COM318
Phone detected...Please wait
Conected ok with target ...
BaseBand CPU : MT6276
SW Version : MAUI.11B.W11.44.MP.V8.F3
HW Version : MIKI76_11B_GEMINI_HW
Reopen comport(COM318)
Meta mode conected ok, start reading phone....
Phone imei : 865081004801977

Block1(N) : Locked (remain:3) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C) : Unlocked

Backup saved to : C:\NCK Dongle\NCK Dongle Generic Flash tool Module\backup\_simlock_865081004801977.nsb
META END OK.
All done.

i want to try direct unlock but software don t load models only blank list

**orbita** · 03-13-2014, 10:56

What you meen not load models.
Explain please.

Punto-Móvil · 03-13-2014, 11:11

Punto-Móvil · 03-13-2014, 11:19

**orbita** · 03-13-2014, 11:36

You still not repply to my QW.
What meen "don t load models " ?

Punto-Móvil · 03-13-2014, 11:57

Quote:

Originally Posted by orbita

You still not repply to my QW.
What meen "don t load models " ?

Can u plz delete my card serial from first image.

ismael_mj23 · 01-06-2015, 16:20

Can you please share G6600 bootmode procedure?

**orbita** · 01-06-2015, 16:28

Quote:

Originally Posted by ismael_mj23

Can you please share G6600 bootmode procedure?

This post is not related at all with topic.
For Huawei G6600 you must use rj45 connection.
Samsung c3300k cable, to be exactly.

ismael_mj23 · 01-07-2015, 14:04

Take a look to log window!! it says usb and software tells you to put phone in bootmode!

ismael_mj23 · 01-07-2015, 14:52

Found it by trying random keys pressed!! Up Arrow button and connect cable

**orbita** · 01-07-2015, 15:11

If you will scroll down this combobox, will see also com ports

ismael_mj23 · 01-07-2015, 19:00

Quote:

Originally Posted by orbita

If you will scroll down this combobox, will see also com ports

By your responses, definetly, how have never work with this software!!

When you select usb, you dont have to select any com port, it finds phone automatically when you connect phone in bootmode!!

03-12-2014, 21:34	#1 (permalink)
Punto-Móvil No Life Poster Join Date: Oct 2009 Location: GRAN ALACANT SPAIN Posts: 1,054 Member: 1147852 Status: Offline Thanks Meter: 587	Unlock verykool s135 [ANSWERED-UNLOCKED] Hi there team Any solution for this phone verykool s135 ? Phone from Claro Santo Domingo I have phone in hands if you need any tests. here is log of read code but wrong nck. Connect phone in boot mode ... Start detecting port.. Com port ok : COM318 Phone detected...Please wait Conected ok with target ... BaseBand CPU : MT6276 SW Version : MAUI.11B.W11.44.MP.V8.F3 HW Version : MIKI76_11B_GEMINI_HW Reopen comport(COM318) Meta mode conected ok, start reading phone.... Phone imei : 865081004801977 Block1(N) : Locked (remain:3) Code : 12345678 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C) : Unlocked Backup saved to : C:\NCK Dongle\NCK Dongle Generic Flash tool Module\backup\_simlock_865081004801977.nsb META END OK. All done. Best Regards Punto-Movil

03-13-2014, 11:11	#6 (permalink)
Punto-Móvil No Life Poster Join Date: Oct 2009 Location: GRAN ALACANT SPAIN Posts: 1,054 Member: 1147852 Status: Offline Thanks Meter: 587	Last edited by NCKCDMA; 03-13-2014 at 14:05. Reason: Remove Card Serial

03-12-2014, 22:52	#3 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Try to make direct unlock. Must be ok, if read supported, must be unlock supported also. If not accepted unlock select any model what accept direct unlock. Doro phones, huawei 6600, zte r3100 and so on. Post result here.

03-13-2014, 10:52	#4 (permalink)
Punto-Móvil No Life Poster Join Date: Oct 2009 Location: GRAN ALACANT SPAIN Posts: 1,054 Member: 1147852 Status: Offline Thanks Meter: 587	log read info with non accepted sim cardb Connect phone in boot mode ... Start detecting port.. Com port ok : COM318 Phone detected...Please wait Conected ok with target ... BaseBand CPU : MT6276 SW Version : MAUI.11B.W11.44.MP.V8.F3 HW Version : MIKI76_11B_GEMINI_HW Reopen comport(COM318) Meta mode conected ok, start reading phone.... Phone imei : 865081004801977 Block1(N) : Locked (remain:3) Code : 12345678 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C) : Unlocked Backup saved to : C:\NCK Dongle\NCK Dongle Generic Flash tool Module\backup\_simlock_865081004801977.nsb META END OK. All done. i want to try direct unlock but software don t load models only blank list

03-13-2014, 10:56	#5 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	What you meen not load models. Explain please.

03-13-2014, 11:19	#7 (permalink)
Punto-Móvil No Life Poster Join Date: Oct 2009 Location: GRAN ALACANT SPAIN Posts: 1,054 Member: 1147852 Status: Offline Thanks Meter: 587

03-13-2014, 11:36	#8 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	You still not repply to my QW. What meen "don t load models " ?

01-06-2015, 16:20	#10 (permalink)
ismael_mj23 Freak Poster Join Date: Jun 2002 Age: 48 Posts: 174 Member: 13329 Status: Offline Thanks Meter: 15	Can you please share G6600 bootmode procedure?

01-07-2015, 14:52	#13 (permalink)
ismael_mj23 Freak Poster Join Date: Jun 2002 Age: 48 Posts: 174 Member: 13329 Status: Offline Thanks Meter: 15	Found it by trying random keys pressed!! Up Arrow button and connect cable

01-07-2015, 15:11	#14 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	If you will scroll down this combobox, will see also com ports