wiko rainbow jam frp done . [USER REPORT] ★★★★★

[DUSKnenixs]

Select cpu mt6582
meta mode identification

Action : Meta Info.
Selected Model: 0-By CPU:MT6582
Exe version: NCKDongle AndroidMTK 2.5.8.9
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[14]Detected: PreLoader USB VCOM Port (COM14)
\\?\usb#vid_0e8d&pid_2000#5&10a89452&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[5]META Port Detected: Gadget CDC VCOM Driver (COM5)
USB\VID_0E8D&PID_2007\5&10A89452&0&1
Start sync target, waiting responce.....
ChipID: MT6580,S01
Using Algo 1.
Brand: WIKO
Board: s5250
Model: RAINBOW JAM
Name: s5250
Release: ALPS.L1.MP6.V2_TINNO6580.WE.L_P4
Version: 5.1
Mediatek Version: ALPS.L1.MP6.V2_TINNO6580.WE.L_P4
Branch: L1.MP6
Platform: MT6580
Reading imei
IMEI[1]: 353544075669606
IMEI[2]: 353544075863605
Modem Version: WR8.W1449.MD.WG.MP TINNO6580_WE_L_w
All done.


frp jobs

Exe version: NCKDongle AndroidMTK 2.5.8.9
Selected model: MT6582
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM14)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A483847316505 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.