Thanks for Xperia Service Back. [ANSWERED]

[abid dar]

What i do?

Unlock procedure started, waiting for phone.
- HOLD THE BACK KEY
- HOLD THE BACK KEY
Reading device info.
Send S1 Loader
Please wait...
Loader is sent, please wait...
CXC : 1229-3641
IMEI : 0123120044****
EROM AID : 0001
LOADER AID : 0001
AID TAMP STATE : NOT_TAMPERED
IMEI : 0123120044****
- NO SE ARC.
- SE UNLOCK STARTED.
- WAITING USER ACTION
- WAITING PHONE
- PHONE FOUND
Start comunication with phone...
- APPLYING CHANGES
- WAITING PHONE
- PHONE FOUND
- UNSUPPORTED VERSION
- STATUS: BOX ERROR
Wait untill phone full power on.

[Fast Unlocking]

you are trying to unlock this phone :

Sony Ericsson
E10i (AAD-3880069-BV)
SW Version 1.0.A.1.34

You need to re check info posted and video and do exactly as it said. if you still can t unlock contact me in pm i will tell u where to send phone and i will unlock it via nck dongle and make u a video out of it

http://forum.gsmhosting.com/vbb/f691...-info-1596215/

BR

[abid dar]

Dear can u post here pattern for unlcok e10i plz.. and SOFTWARE VERSION: 1235-3408_2.1.1.C.0.0

[Fast Unlocking]

we don t do pattern unlock for these models.

BR

[abid dar]

Dear i say plz paste here proper way for unlocking pattern..u copy here [FAQ] XPERIA Unlocking Help Info this link i say u paste here for this model unlocking way.

[Fast Unlocking]

i don t have to post nothing you go to that thread and read simple.

And this is NETWORK SIM LOCK UNLOCKING , NOT Pattern Unlock , Pattern unlock is something else and we do not support.

All details is posted there, and a video is also posted in sticky threads.

now it is up to u, to search a learn how to use.

[abid dar]

Bro i thnk my wording not fi9.. i want to Unlock e10i sim unlcok. what i use for unlock in it.?
How to Install Drivers for NON Test Point Models:

1. Go to X10 DRIVERS
2. Select the correct 32 bit or 64 bit shortcut folder for your Operating System
3. First run "SEMC Flash Driver Install"
4. Complete the install wizard that appears
5. Second run "ADB Driver Install"
6. Complete the install wizard that appears
7. Next we need to connect the X10 in Flash Mode (some times called boot mode)
8. Remove the battery for 10 seconds and replace
9. With the phone still powered off, Press & HOLD the "Back Button"
10. Still holding the Back Button connect the USB cable
11. Windows will now detect the new hardware and automatically install the drivers.
12. Once complete, remove the USB cable from the phone and power the phone on.
13. Next we will connect the phone with "USB Debugging" Enabled
14. On the phone go to "Settings"
15. Next go to "Applications"
16. Next go to "Development"
17. Now enable "USB Debugging"
18. Click "OK" to confirm enabling of USB Debugging
19. Now connect the USB cable
20. Windows will now detect the new hardware and automatically install the drivers.
21. Once complete you can proceed to unlock your X10, X8 etc...

Follow Instructions on Screen.

Now we can proceed to Unlocking the X10, X8, etc...

1. Now click on the "SE" tab of the software
2. Please make sure SIM card is removed from the phone
Please make sure SD card is inserted in the phone before unlock !!!!!!!!
3. Make sure that your phone is running a later version of ANDROID that 1.6 (tick the box to confirm on the Unlock Client) or ....
4. If you are unsure if your phone is running v2.1 or later, then connect the phone in USB Debugging Mode & click "Check Phone"
5. Ok, we now know we are running ANDROID 2.1 or above (if you are not then please upgrade your phone and start again)
6. Remove your phones battery for 10 seconds and replace
7. Press and HOLD the phones back button
8. While still holding the phones back button connect the USB cable.
9. The unlock client will now start the unlock process
10. When prompted by the UNLOCK SOFTWARE, remove the USB cable and power on the phone.
11. Make sure the phone is in USB Debugging Mode and connect the USB Cable again
12. The SOFTWARE will now complete the unlock