ZTE G x930 firmware write fail [ANSWERED]

[dazexy]

Only ENG Language in phone, so i try make fw upgrade. But before this i read full flash:

OPERATION : READ FULL.
 DA version: 5.1224.00.00
 Press and keep power on ...
 Com port opened...Press power on
 Download DA now...You can release power on
 CHANGE BAUDRATE SUCCES :S_DONE(0)
 BOOT STYLE :S_NAND_FLASH_BOOT(1034)
 DA download finished...Getting phone info
 BaseBand CPU:MT6235B_S01
 BaseBand CPU Secure Version : FF
 INT RAM: 512Kb
 EXT RAM NOT ACTIVATED.
 FLASH TYPE : NAND
 ID: NAND:(1Gb) [HYNIX] H8BCS0PG0MBP  size:0x08000000
 TRY TO ACTIVATE DRAM.
 NAND FAT Ranges  = 0x02000000 length:0x06000000
 READ RANGES : START(0x00000000) LENGTH(0x08000000)
 PATH : C:\NCK Dongle\NCK Dongle Generic Flash tool Module\firmware_backup\readback_full_.bin
 ACTION READBACK NAND : ADDRES(0x00000000)-LENGTH(0x08000000)
 CLOSING COM PORT HANDLE...
 ALL DONE.

and fw write:

 DA version: 5.1224.00.00
 FAT FORMAT NOT ENABLED.
 Com port ok : COM128
 Press and keep power on ...
 Com port opened...Press power on
 Download DA now...You can release power on
 DA download finished...Getting phone info
 BaseBand CPU:MT6235B_S01
 BaseBand CPU Secure Version : FF
 INT RAM: 512Kb
 EXT RAM: 512Mb DRAM
 FLASH TYPE : NAND
 ID: NAND:(1Gb) [HYNIX] H8BCS0PG0MBP  size:0x08000000
 ACTION : PROGRAMMING TARGET.
 Error : S_FT_DOWNLOAD_CHKSUM_MISMATCH(4009)
 ALL DONE.

the set dead now. Can any of supporters help?

Many thanx

dazexy

[orbita]

In settings enable debug_log and post here brom_debug_log

[dazexy]

ok i will do. and come back.

here is the untouched dump if needed:

https://www.dropbox.com/s/hxqf00a7yp...back_full_.rar

[dazexy]

here is debug log:

many thax.

[orbita]

I'am checked firmware from support and firmware are ok.

From log lost packets when write firmware.
Try extract firmware in c:/ or d:/ directory, select also lower baud.
Be sure you use good usb cable between virtual com box and pc.

Also if you use win7 be sure exe started in admin mode.

"C:\X930_V1_Z3_ITGR_GRITDEFR_B1FF113\ROM": Send Checksum (0x9273). 
"C:\X930_V1_Z3_ITGR_GRITDEFR_B1FF113\ROM": Image Checksum OK!
"C:\X930_V1_Z3_ITGR_GRITDEFR_B1FF113\SECONDARY_ROM": Send Checksum (0x9D48).
"C:\X930_V1_Z3_ITGR_GRITDEFR_B1FF113\SECONDARY_ROM": Image Checksum OK!
"C:\X930_V1_Z3_ITGR_GRITDEFR_B1FF113\DEMAND_PAGING_ROM0": Send Checksum 
"C:\X930_V1_Z3_ITGR_GRITDEFR_B1FF113\DEMAND_PAGING_ROM0": Image Checksum OK!

This is from my log

 "E:\!mobil\!mobil_(nem free)\!NCK_DONGLE\!Flash\zte\x930\X930_V1_Z3_ITGR_GRITDEFR_B1FF113\ROM": Send Checksum (0x9273). 
ERROR: DA_cmd::Check_Hash_of_Image(): Image checksum error!!! PC's Image Checksum (0x9273) != Target's Image Checksum (0x9B40)

And this is your log.
ROM image checksum error what is in target and what is in PC.

[ReyTech]

Originally Posted by dazexy

ok i will do. and come back.

here is the untouched dump if needed:

https://www.dropbox.com/s/hxqf00a7yp...back_full_.rar

hi! can u share which cable did u use to flash this model! i too have a pc which just hangs on startup logo! so pls inform!
WBR
ReyTEch.

[dazexy]

Originally Posted by ReyTech

hi! can u share which cable did u use to flash this model! i too have a pc which just hangs on startup logo! so pls inform!
WBR
ReyTEch.

Gw300

Tapatalk 2-vel küldve az én GT-N7000-ről

[ReyTech]

Thanks for sharing m8

Sent from my GT-N8000 using Tapatalk