How to codes this in vb6 with UFSx - GSM-Forum

dr_aybyd · 02-16-2007, 03:31

Hi any one can help me how to send this Hex tru UFSx box to phone..
this codes/hex can set phone mode to Local, Test, Normal Mode...
And also how can I connect and read Serial # of may UFSx box and display it in my sw.

Code:

Select Case cboMODEcp
           Case "Local"
           SendHex ("55 55 55 55 55")
            Wait 0.1
           SendHex ("1E 00 10 15 00 08 00 06 00 01 05 00 01 42 0A 58") 'local
            Wait 0.1
           Case "Test"
           SendHex ("55 55 55 55 55")
            Wait 0.1
           SendHex ("1E 00 10 15 00 08 00 06 00 01 04 00 01 41 0B 5B") 'test
            Wait 0.1
           Case "Normal"
           SendHex ("55 55 55 55 55")
            Wait 0.1
           SendHex ("1E 00 10 15 00 08 00 06 00 01 01 00 01 44 0E 5E") 'normal
            Wait 0.1
           Case "Restart"
           SendHex ("55 55 55 55 55")
            Wait 0.1
           SendHex ("1E 00 0C 15 00 08 00 01 00 05 80 00 01 42 93 5B") 'restart
            Wait 0.1
    End Select

TIA
br
aybyd

UNLIMITED Team · 02-16-2007, 04:53

@dr_aybyd

what do you mean send hex to UFS box? you mean UFS send fbus frames to phone?

Lhick · 02-16-2007, 04:58

What are you trying to do with your Box? Mate. If you have some problem Contact your Reseller.

G*Mughal*G · 02-16-2007, 05:13

hehehe. He is asking about vb source code which can send hex string to phone connected with ufsx.... in other words vb code for using ufsx device to send / receive data ...

dr_aybyd · 02-16-2007, 05:16

sorry for that
Edited now...
i mean send that hex to phone using UFSx interface

UNLIMITED Team · 02-16-2007, 07:34

@dr_aybyd

maybe all you need first is to drive the atmega8 in ufsx box.

regards,
monxxx

thefoxes · 03-01-2007, 08:44

I am looking do something similar. Like USBSmart as the UFS device as an input. For my service centre i want to create a cut down version of the UFS software, so less damaging to the phone by users not fully aware of the power of the UFS software. So what coding do i need to see the UFS as a supported device and send received FBus commands

Thanks

Terry

DZStorm · 03-01-2007, 15:38

Here's a good link for FTDI devices programming for beginers with Code exemples for :

-C++ Builder
-C#
-Delphi
-LabVIEW
-Visual Basic
-Visual C++
-& Other Platforms
http://www.ftdichip.com/Projects/CodeExamples.htm
Enjoy

UNLIMITED Team · 03-02-2007, 02:51

Hi,

UFS box has atmega inside + ftdi chip then you need to boot the atmega of ufs box.. and so on.. you will discover the power ufs box

regards,

Zaihtam · 03-02-2007, 20:39

You must ask to saras

He is the owner.
'

GOod Luck...

UNLIMITED Team · 03-03-2007, 15:28

Quote:

Originally Posted by Zaihtam

You must ask to saras

He is the owner.
'

GOod Luck...

then how to contact mr. saras?

02-16-2007, 05:13	#4 (permalink)
GMughalG Freak Poster Join Date: Apr 2005 Location: Rawalpindi,Pakistan Age: 45 Posts: 235 Member: 133099 Status: Offline Sonork: 100.1582860 Thanks Meter: 18	hehehe. He is asking about vb source code which can send hex string to phone connected with ufsx.... in other words vb code for using ufsx device to send / receive data ... Last edited by GMughalG; 02-16-2007 at 05:48.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How To Adjust Contrast In Cf62 With Joker Or Eeprom Tool	sofiame2006	E-Gold Based Phones	1	03-28-2006 18:37
How To Unlock Sony Ericsson Z520a With Ufsx Hwk...???????????	~Gsm_Solutions~	Sony Ericsson	1	01-25-2006 23:19
How To Unlock Sony Ericsson Z520a With Ufsx Hwk	~Gsm_Solutions~	HWK	2	01-24-2006 13:57
how to upload game in ngage with extn blz	zamkhan	WD2 & APE (Symbian Phones)	6	04-01-2005 19:20

02-16-2007, 04:53	#2 (permalink)
UNLIMITED Team Freak Poster Join Date: Nov 2004 Posts: 250 Member: 91951 Status: Offline Thanks Meter: 18	@dr_aybyd what do you mean send hex to UFS box? you mean UFS send fbus frames to phone?

02-16-2007, 04:58	#3 (permalink)
Lhick No Life Poster Join Date: Aug 2006 Location: InsideOut Posts: 5,657 Member: 333359 Status: Offline Thanks Meter: 91	What are you trying to do with your Box? Mate. If you have some problem Contact your Reseller.

02-16-2007, 05:16	#5 (permalink)
dr_aybyd Freak Poster Join Date: Mar 2005 Location: inside USB cable Age: 41 Posts: 425 Member: 128122 Status: Offline Thanks Meter: 256	sorry for that Edited now... i mean send that hex to phone using UFSx interface

02-16-2007, 07:34	#6 (permalink)
UNLIMITED Team Freak Poster Join Date: Nov 2004 Posts: 250 Member: 91951 Status: Offline Thanks Meter: 18	@dr_aybyd maybe all you need first is to drive the atmega8 in ufsx box. regards, monxxx

03-01-2007, 08:44	#7 (permalink)
thefoxes Freak Poster Join Date: Aug 2005 Age: 52 Posts: 124 Member: 174847 Status: Offline Thanks Meter: 5	I am looking do something similar. Like USBSmart as the UFS device as an input. For my service centre i want to create a cut down version of the UFS software, so less damaging to the phone by users not fully aware of the power of the UFS software. So what coding do i need to see the UFS as a supported device and send received FBus commands Thanks Terry

03-01-2007, 15:38	#8 (permalink)
DZStorm No Life Poster Join Date: Jul 2005 Location: TUNISIA Age: 44 Posts: 2,563 Member: 160204 Status: Offline Sonork: 100.113150 Thanks Meter: 2,843	Here's a good link for FTDI devices programming for beginers with Code exemples for : -C++ Builder -C# -Delphi -LabVIEW -Visual Basic -Visual C++ -& Other Platforms http://www.ftdichip.com/Projects/CodeExamples.htm Enjoy

03-02-2007, 02:51	#9 (permalink)
UNLIMITED Team Freak Poster Join Date: Nov 2004 Posts: 250 Member: 91951 Status: Offline Thanks Meter: 18	Hi, UFS box has atmega inside + ftdi chip then you need to boot the atmega of ufs box.. and so on.. you will discover the power ufs box regards,

03-02-2007, 20:39	#10 (permalink)
Zaihtam No Life Poster Join Date: Dec 2004 Location: 0x001FD00 Posts: 1,285 Member: 98572 Status: Offline Thanks Meter: 36	You must ask to saras He is the owner. ' GOod Luck...