Bricked a W995 - GSM-Forum

haktar · 04-12-2012, 11:49

Hey guys, i could really use some help with a SE W995, it came in with the no network problem follwing a tutorial online using omnius ive managed to brick it, i can still flash the phone no problem but every firmware i try doesn't seem to work. any help would be greatly appreciated

if we can sort it quickish today ill paypal whoever solves it a fiver :P, i know its not much but its what ive got.

Thanks

***THE CLASH*** · 04-12-2012, 13:21

you say bricked, what exactly is it doing when you press the power button..
you say you used Omnius,, try to rebuild the security,, and also have a fully charged battery in it..

haktar · 04-12-2012, 13:41

when i plug it in holding C, it takes about a minute before it detects to flash also during this time the red light either stays on or flashes, SEMC flash device is what detects, i will try rebuilding the security just now, the tut i read said nothing about that, hopefully thats it

haktar · 04-12-2012, 13:47

hmm i can't find anwhere an option to rebuild the security, i actually tried to fix the network error by writing a TA and GDFS from the tut i don't know if thats the problem?

***THE CLASH*** · 04-12-2012, 14:39

its on the drop down box,, on the unlock option, repair semec boot, make sure its ticked.

haktar · 04-13-2012, 17:12

hmm i don't seem to have that, i only have unlock network lock by reset and user code reset

haktar · 04-13-2012, 17:20

Code:

17:13:39   Connecting via SEMC USB Flash Device (USB2)...
17:13:39   Device driver version: 2.2.0.5
17:13:39   Entering baseband CPU service mode...
17:13:39   Detected chipset: DB3210 'E900
17:13:39   Boot mode: EROM
17:13:39   IMEI: **********
17:13:39   OTP CID: 81
17:13:39   OTP area status: Locked
17:13:39   Product type: Retail
17:13:39   Effective color: Red
17:13:39   Sending loader...
17:13:41   Sending loader...
17:13:42   NAND flash chip ID: 00EC-00AA
17:13:42   Phone type: W995
17:13:42   MAPP CXC article: R1HA035     prg1215-7995_GENERIC_HI
17:13:42   MAPP CXC version: R1HA035
17:13:42   CDA article: 1222-5068
17:13:43   CDA version: R11A
17:13:43   Default article: 1215-7993
17:13:43   Default version: R1HA035
17:13:43   Language package: WESTERN-EUROPE
17:13:43 i These phone locks are active: Network
17:13:43   Sending loader...
17:13:45   Starting file system...
17:14:04   Initializing GDFS access...
17:14:04   Turning off the phone...
17:14:05 i Please disconnect battery and cable from the phone!
17:14:05 s Successfully done.
17:14:05 . The action entered shutdown phase
17:14:05 . The action reported success

***THE CLASH*** · 04-13-2012, 19:05

unlock it,, also you will see repair semec boot, tick this, so when you unlock it, it will repair it...

haktar · 04-16-2012, 14:36

thanks again the clash im now getting

Code:

Action journal
14:35:24   Unlock network lock by reset
14:35:24   Unlocks the phone network lock by reset (up to OTP CID 53).
14:35:24   Operating system: Microsoft Windows XP Professional Service Pack 3 (build 2600)
14:35:24   Application version: 0.36.4563
14:35:24 . The action name is 'Unlock'
14:35:24   Selected phone type: W995
14:35:24   Selected connection method: USB ROM
14:35:24 i Instructions
14:35:24 i 1. Make sure the phone battery is charged to at least 50%.
14:35:24 i 2. Switch off the phone!
14:35:24 i 3. Remove the phone battery and wait at least 5 seconds, then insert the battery back to the phone!
14:35:24 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
14:35:24 . The action started waiting for the user
14:35:33 . The action finished waiting for the user
14:35:33   Connecting via Generic EMP USB Flash Device (USB2)...
14:35:33   Device driver version: 2.2.0.5
14:35:33   Entering baseband CPU service mode...
14:35:33   Detected chipset: DB3210 'E900
14:35:34   Boot mode: ROM
14:35:34   IMEI: 01248400047763
14:35:34   OTP CID: 81
14:35:34   OTP area status: Locked
14:35:34   Product type: Retail
14:35:34   Effective color: Red
14:35:34 e Error: Unsupported CID: 81
14:35:34 e Failed!
14:35:34 . The action entered shutdown phase
14:35:34 . The action reported failure

Error code
# 19227BBE18FA4551

Error details
---
0B E9 23 BA 0D 71 0F 4A 71 DE 4C 43 BB 58 B7 6B 
D9 18 2B D6 3C F3 F1 0D 41 BC AD 6E EC 44 F9 26 
57 5C D5 5B 03 10 51 98 11 A1 5D F1 1B AA FB A3 
29 BD CB F6 33 0A B0 FA FE A7 5D 12 B5 88 A7 4C 
49 94 E5 7E 6D 4B CD 58 
---

***THE CLASH*** · 04-17-2012, 14:24

Sorry,, i just noticed you have a cid 81,, not a lot you can do with omnius,

haktar · 04-17-2012, 18:41

is there anything i can do it with? unfortunately all I have is a mxkey

***THE CLASH*** · 04-18-2012, 10:35

Did you try the procedure posted on the omnius support site about W995 no network , which involves flashing GDFS,i am a little stumped as to your phone being Dead,maybe you have used a none w995 gdfs.?

haktar · 04-18-2012, 13:23

Hey the clash, thanks again for your help, i don't know what website the tutorial was on but that is what I did I flashed the gdfs, is there any chance you could link me i took a look there bu i couldn't see the one on omnius's website

***THE CLASH*** · 04-18-2012, 13:47

check your Pm....please..

04-12-2012, 11:49	#1 (permalink)
haktar Insane Poster Join Date: Feb 2012 Posts: 77 Member: 1720265 Status: Offline Thanks: 4 Thanked 2 Times in 2 Posts	Bricked a W995 Hey guys, i could really use some help with a SE W995, it came in with the no network problem follwing a tutorial online using omnius ive managed to brick it, i can still flash the phone no problem but every firmware i try doesn't seem to work. any help would be greatly appreciated if we can sort it quickish today ill paypal whoever solves it a fiver :P, i know its not much but its what ive got. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Sharp 903SH Bricked - Help Requested	kooty-sentinel	Sharp	0	02-23-2006 23:59
How to upgrade BT F/W in DiNovo brick?	olmari	Bluetooth-Software	0	02-17-2005 21:25
T720 bricked	sarajevo	P2k Series	9	04-27-2004 00:41
i need some old brick phones	technogen1	Wanted Products	0	06-30-2003 21:55
A little help in a brick phone..	fontelense	Siemens-Benq RingTones and WallPapers	1	05-20-2003 18:15

04-12-2012, 13:21	#2 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.. Age: 47 Posts: 4,477 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks: 0 Thanked 807 Times in 414 Posts	you say bricked, what exactly is it doing when you press the power button.. you say you used Omnius,, try to rebuild the security,, and also have a fully charged battery in it..

04-12-2012, 13:41	#3 (permalink)
haktar Insane Poster Join Date: Feb 2012 Posts: 77 Member: 1720265 Status: Offline Thanks: 4 Thanked 2 Times in 2 Posts	when i plug it in holding C, it takes about a minute before it detects to flash also during this time the red light either stays on or flashes, SEMC flash device is what detects, i will try rebuilding the security just now, the tut i read said nothing about that, hopefully thats it

04-12-2012, 13:47	#4 (permalink)
haktar Insane Poster Join Date: Feb 2012 Posts: 77 Member: 1720265 Status: Offline Thanks: 4 Thanked 2 Times in 2 Posts	hmm i can't find anwhere an option to rebuild the security, i actually tried to fix the network error by writing a TA and GDFS from the tut i don't know if thats the problem?

04-12-2012, 14:39	#5 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.. Age: 47 Posts: 4,477 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks: 0 Thanked 807 Times in 414 Posts	its on the drop down box,, on the unlock option, repair semec boot, make sure its ticked.

04-13-2012, 17:12	#6 (permalink)
haktar Insane Poster Join Date: Feb 2012 Posts: 77 Member: 1720265 Status: Offline Thanks: 4 Thanked 2 Times in 2 Posts	hmm i don't seem to have that, i only have unlock network lock by reset and user code reset

04-13-2012, 19:05	#8 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.. Age: 47 Posts: 4,477 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks: 0 Thanked 807 Times in 414 Posts	unlock it,, also you will see repair semec boot, tick this, so when you unlock it, it will repair it...

04-17-2012, 14:24	#10 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.. Age: 47 Posts: 4,477 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks: 0 Thanked 807 Times in 414 Posts	Sorry,, i just noticed you have a cid 81,, not a lot you can do with omnius,

04-17-2012, 18:41	#11 (permalink)
haktar Insane Poster Join Date: Feb 2012 Posts: 77 Member: 1720265 Status: Offline Thanks: 4 Thanked 2 Times in 2 Posts	is there anything i can do it with? unfortunately all I have is a mxkey

04-18-2012, 10:35	#12 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.. Age: 47 Posts: 4,477 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks: 0 Thanked 807 Times in 414 Posts	Did you try the procedure posted on the omnius support site about W995 no network , which involves flashing GDFS,i am a little stumped as to your phone being Dead,maybe you have used a none w995 gdfs.?

04-18-2012, 13:23	#13 (permalink)
haktar Insane Poster Join Date: Feb 2012 Posts: 77 Member: 1720265 Status: Offline Thanks: 4 Thanked 2 Times in 2 Posts	Hey the clash, thanks again for your help, i don't know what website the tutorial was on but that is what I did I flashed the gdfs, is there any chance you could link me i took a look there bu i couldn't see the one on omnius's website

04-18-2012, 13:47	#14 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.. Age: 47 Posts: 4,477 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks: 0 Thanked 807 Times in 414 Posts	check your Pm....please..