C902 flash error - GSM-Forum

BLACK HAWK · 03-25-2010, 11:45

Hi guys.sorry im so quiet.i flashed a se c902 which was hanging but afterwards it only shows please wait and restarts.its the second time this has happened to me.i use e same files on many phones and they work properly.i used setool and also cruiser but all in vain.after that i read its info and here is log
PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5")
CFG:110110000000
ChipID:C900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,52,1,35362603669459]
OTP LOCKED:1 CID:52 PAF:1 IMEI:35362603669459 CERT:RED
LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82
DEVICE KEY:FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF (1)
LDR:2009-04-21 18:17 CXC1250781_DB31XX_RESET_LOADER_ACC_SDRAM_R2A081
LDR:2009-04-21 18:18 CXC1250782_DB31XX_RESET_LOADER_APP_SDRAM_R2A081
GOT SEED:C201DD3A34805A65353071A3
P96 AUTH PASSED
RESETTING SECURITY TO FACTORY STATE...
RESTARTING...
ChipID:C900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,52,1,35362603669459]
OTP LOCKED:1 CID:52 PAF:1 IMEI:35362603669459 CERT:BROWN
LDR:2009-06-26 15:52 CXC1250777_DB31XX_PRODUCTION_LOADER_ACC_SDRAM_R2A0 82
LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82
WRITING SEMCBOOT...
PREPARING SECURITY...
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "32861568"
CHANGING DOMAIN TO "CURRENT"
SIGNING...
DEVICE KEY RESTORED
Unlock FINISHED
Elapsed: 29 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5")
CFG:110110000000
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 2 secs.
what can i do?

shsarfraz · 03-25-2010, 12:54

Quote:

Originally Posted by BLACK HAWK

Hi guys.sorry im so quiet.i flashed a se c902 which was hanging but afterwards it only shows please wait and restarts.its the second time this has happened to me.i use e same files on many phones and they work properly.i used setool and also cruiser but all in vain.after that i read its info and here is log
PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5")
CFG:110110000000
ChipID:C900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,52,1,35362603669459]
OTP LOCKED:1 CID:52 PAF:1 IMEI:35362603669459 CERT:RED
LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82
DEVICE KEY:FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF (1)
LDR:2009-04-21 18:17 CXC1250781_DB31XX_RESET_LOADER_ACC_SDRAM_R2A081
LDR:2009-04-21 18:18 CXC1250782_DB31XX_RESET_LOADER_APP_SDRAM_R2A081
GOT SEED:C201DD3A34805A65353071A3
P96 AUTH PASSED
RESETTING SECURITY TO FACTORY STATE...
RESTARTING...
ChipID:C900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,52,1,35362603669459]
OTP LOCKED:1 CID:52 PAF:1 IMEI:35362603669459 CERT:BROWN
LDR:2009-06-26 15:52 CXC1250777_DB31XX_PRODUCTION_LOADER_ACC_SDRAM_R2A0 82
LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82
WRITING SEMCBOOT...
PREPARING SECURITY...
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "32861568"
CHANGING DOMAIN TO "CURRENT"
SIGNING...
DEVICE KEY RESTORED
Unlock FINISHED
Elapsed: 29 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5")
CFG:110110000000
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 2 secs.
what can i do?

Flash again your fone with C902AS firmware

roney_nexus · 03-25-2010, 15:27

Quote:

Originally Posted by BLACK HAWK

Hi guys.sorry im so quiet.i flashed a se c902 which was hanging but afterwards it only shows please wait and restarts.its the second time this has happened to me.i use e same files on many phones and they work properly.i used setool and also cruiser but all in vain.after that i read its info and here is log
PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5")
CFG:110110000000
ChipID:C900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,52,1,35362603669459]
OTP LOCKED:1 CID:52 PAF:1 IMEI:35362603669459 CERT:RED
LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82
DEVICE KEY:FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF (1)
LDR:2009-04-21 18:17 CXC1250781_DB31XX_RESET_LOADER_ACC_SDRAM_R2A081
LDR:2009-04-21 18:18 CXC1250782_DB31XX_RESET_LOADER_APP_SDRAM_R2A081
GOT SEED:C201DD3A34805A65353071A3
P96 AUTH PASSED
RESETTING SECURITY TO FACTORY STATE...
RESTARTING...
ChipID:C900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,52,1,35362603669459]
OTP LOCKED:1 CID:52 PAF:1 IMEI:35362603669459 CERT:BROWN
LDR:2009-06-26 15:52 CXC1250777_DB31XX_PRODUCTION_LOADER_ACC_SDRAM_R2A0 82
LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82
WRITING SEMCBOOT...
PREPARING SECURITY...
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "32861568"
CHANGING DOMAIN TO "CURRENT"
SIGNING...
DEVICE KEY RESTORED
Unlock FINISHED
Elapsed: 29 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5")
CFG:110110000000
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 2 secs.
what can i do?

i hope Most Probably flash ic is dead or unsoldered

check UNLOCK/REPAIR via Alt Bypass

BR
roney_nexus

BLACK HAWK · 03-30-2010, 09:22

Already done that but with no luck.Thanx any way

roney_nexus · 03-30-2010, 09:38

Quote:

Originally Posted by BLACK HAWK

Already done that but with no luck.Thanx any way

i hope hardware pb chk for flash ic etc....thx

sani_bcn · 08-19-2010, 15:12

i have identifu first c902 than i flash the same files
after this when i turn on it it comes error. like configuration error please contact your netwrok operator service centre.

please helpppppppppppppppppppppppppp

omarSA · 12-02-2010, 11:27

i had same problem.

all flash file i use did same thing.

Downloaded SE PC Suite from se site, and used "Phone Repair" option via internet.

phone is now 100%

angel_of_love1 · 12-03-2010, 22:42

Quote:

Originally Posted by sani_bcn

i have identifu first c902 than i flash the same files
after this when i turn on it it comes error. like configuration error please contact your netwrok operator service centre.

please helpppppppppppppppppppppppppp

this error means that you flashed your phone just with Main and FS ..

Please download costum file and the error will be desapear

03-25-2010, 11:45	#1 (permalink)
BLACK HAWK Insane Poster Join Date: Feb 2007 Posts: 91 Member: 454134 Status: Offline Thanks Meter: 4	C902 flash error Hi guys.sorry im so quiet.i flashed a se c902 which was hanging but afterwards it only shows please wait and restarts.its the second time this has happened to me.i use e same files on many phones and they work properly.i used setool and also cruiser but all in vain.after that i read its info and here is log PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5") CFG:110110000000 ChipID:C900,EMP protocol:0401 BOOTROM MODE DETECTED OTP DBG: [1,52,1,35362603669459] OTP LOCKED:1 CID:52 PAF:1 IMEI:35362603669459 CERT:RED LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82 DEVICE KEY:FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF (1) LDR:2009-04-21 18:17 CXC1250781_DB31XX_RESET_LOADER_ACC_SDRAM_R2A081 LDR:2009-04-21 18:18 CXC1250782_DB31XX_RESET_LOADER_APP_SDRAM_R2A081 GOT SEED:C201DD3A34805A65353071A3 P96 AUTH PASSED RESETTING SECURITY TO FACTORY STATE... RESTARTING... ChipID:C900,EMP protocol:0401 BOOTROM MODE DETECTED OTP DBG: [1,52,1,35362603669459] OTP LOCKED:1 CID:52 PAF:1 IMEI:35362603669459 CERT:BROWN LDR:2009-06-26 15:52 CXC1250777_DB31XX_PRODUCTION_LOADER_ACC_SDRAM_R2A0 82 LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82 WRITING SEMCBOOT... PREPARING SECURITY... WRITING CLEAR SIMLOCK UNITS... ALL UNLOCK/LOCK CODES SET TO "32861568" CHANGING DOMAIN TO "CURRENT" SIGNING... DEVICE KEY RESTORED Unlock FINISHED Elapsed: 29 secs. SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5") CFG:110110000000 PROCEDURE WAS STOPPED BY USER FAILED TO SETUP PHONE Elapsed: 2 secs. what can i do?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
N96 Weird Flashing error	javakiller	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	14	10-10-2010 11:55
c902 unlock error	sancakaziz	SETool2	9	05-18-2010 09:46
1650 flash error	nilesh_patel717	Nokia Hardware & Hardware Repair	3	03-29-2010 14:03
c902 flashing error	noman shakir	SETool2	0	04-14-2009 07:03
C902 - doestn turn on and flash error	Maresch	Cruiser Suite	3	02-05-2009 09:50

03-30-2010, 09:22	#4 (permalink)
BLACK HAWK Insane Poster Join Date: Feb 2007 Posts: 91 Member: 454134 Status: Offline Thanks Meter: 4	Already done that but with no luck.Thanx any way

08-19-2010, 15:12	#6 (permalink)
sani_bcn Insane Poster Join Date: Dec 2009 Posts: 91 Member: 1180134 Status: Offline Thanks Meter: 2	i have identifu first c902 than i flash the same files after this when i turn on it it comes error. like configuration error please contact your netwrok operator service centre. please helpppppppppppppppppppppppppp

12-02-2010, 11:27	#7 (permalink)
omarSA Insane Poster Join Date: Jan 2006 Posts: 95 Member: 218868 Status: Offline Thanks Meter: 5	i had same problem. all flash file i use did same thing. Downloaded SE PC Suite from se site, and used "Phone Repair" option via internet. phone is now 100%