K750i dead, white screen then nothing - GSM-Forum

mazdaspeed_FC · 07-26-2005, 04:21

apparently this has happened to others as well

k750i is dead for no reason, i turned it off to switch sim and when i tried to turn it on again, it shows white screen for 2 sec, then turns off

i had originally upgarded to R1L via SE's website, and also tried recovery mode to revive the phone after it was dead, but nothing

anybody else experience this? any solutions?

F C · 07-29-2005, 12:47

Quote:

Originally Posted by mazdaspeed_FC

apparently this has happened to others as well

k750i is dead for no reason, i turned it off to switch sim and when i tried to turn it on again, it shows white screen for 2 sec, then turns off

i had originally upgarded to R1L via SE's website, and also tried recovery mode to revive the phone after it was dead, but nothing

anybody else experience this? any solutions?

FLASH BACK THE FONE , ALL WD BE OK

REGARDS
GOHAR

jasonuk · 02-22-2006, 11:54

I have this problem too. Using USB-Smart - the problem I have is that I can't seem to communicate with the phone from SEMC_Tool_64. I get 'Switch on phone' after selecting an option and pressing the on button on the phone does nothing. Removing the battery and inserting again just makes the screen flash white for 2 seconds then off again.

Please help! Have tried 'recovering cert', flashing again, writing GDFS etc but can't because of above communication problem! :-(

Any ideas?

Regards,

Jason

caribe · 02-22-2006, 19:23

use orginal usb-smart with repair flash its works for me very well ,did 3 belonging to customer and they worked well.u can even convert it to either w800i or d750i

.::Unlocker.:: · 02-23-2006, 10:02

Use UFS HWK and flash and init SB

macpegg · 07-17-2006, 11:56

Quote:

Originally Posted by mazdaspeed_FC

apparently this has happened to others as well

k750i is dead for no reason, i turned it off to switch sim and when i tried to turn it on again, it shows white screen for 2 sec, then turns off

i had originally upgarded to R1L via SE's website, and also tried recovery mode to revive the phone after it was dead, but nothing

anybody else experience this? any solutions?

I have this exact problem when i changed sims. Can anyone reply with a dummy guide from start to finish on how to fix this issue. I don`t mind paying for software. I have the original data cable but nothing else...

Rhanx in advance

07-26-2005, 04:21	#1 (permalink)
mazdaspeed_FC Freak Poster Join Date: Jul 2003 Location: Canada Age: 29 Posts: 199 Member: 35468 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	K750i dead, white screen then nothing apparently this has happened to others as well k750i is dead for no reason, i turned it off to switch sim and when i tried to turn it on again, it shows white screen for 2 sec, then turns off i had originally upgarded to R1L via SE's website, and also tried recovery mode to revive the phone after it was dead, but nothing anybody else experience this? any solutions?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
6120c, white screen then blue screen then power off	DjDecibel	Nokia Hardware & Hardware-Repair Area	6	02-26-2011 09:33
6260 white screen then 15 sec turns off	sharkie2006	Nokia Hardware & Hardware-Repair Area	3	09-28-2009 11:32
3650 3 sec white screen then turns off	spguru	Twisterflasher	2	02-01-2005 16:51
e616 white screen then shutdown	ashannafi	NEC	0	07-11-2004 08:47
5210 first black screen then nothing	Burnt Cobba	Nokia Hardware & Hardware-Repair Area	7	11-22-2002 23:45

02-22-2006, 11:54	#3 (permalink)
jasonuk Junior Member Join Date: May 2005 Age: 33 Posts: 7 Member: 143669 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I have this problem too. Using USB-Smart - the problem I have is that I can't seem to communicate with the phone from SEMC_Tool_64. I get 'Switch on phone' after selecting an option and pressing the on button on the phone does nothing. Removing the battery and inserting again just makes the screen flash white for 2 seconds then off again. Please help! Have tried 'recovering cert', flashing again, writing GDFS etc but can't because of above communication problem! :-( Any ideas? Regards, Jason

02-22-2006, 19:23	#4 (permalink)
caribe Freak Poster Join Date: Mar 2005 Age: 27 Posts: 213 Member: 125973 Status: Offline Thanks: 0 Thanked 3 Times in 2 Posts	use orginal usb-smart with repair flash its works for me very well ,did 3 belonging to customer and they worked well.u can even convert it to either w800i or d750i

02-23-2006, 10:02	#5 (permalink)
.::Unlocker.:: Banned Join Date: Oct 2005 Location: inside forum Posts: 751 Member: 193336 Status: Offline Thanks: 0 Thanked 9 Times in 8 Posts	Use UFS HWK and flash and init SB