need help with Se/xs w800 patch - GSM-Forum

philippeb · 02-22-2008, 00:56

Hello,
Lets make this short

In Se i just follow 2 tuorial's (Saying the same but then im sure)
And when it comes to where i shall put my patch in the Files/add box, But nothing appears ?, i tried to press "Flash" butten after, and still nothing.

In Xs i allmost get the same, but under the patch section i insert my patch, and it just lets the "Extract" button stay grey or unavable or whatever called,

Any suggestions, hope this is a FAQ :P

reactos · 02-22-2008, 01:20

the patch goes in misc

philippeb · 02-22-2008, 01:29

So i just put it in misc
And then press the flash button ?

Cause now it's saying

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
OLD EROM, OVERRIDING COLOR
OLD EROM, OVERRIDING CID
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900924931 CERT:RED
FLASH CID:36 COLOR:RED

MAPP CXC article: R1AA008 prgCXC1250092_EU_1_CA
MAPP CXC version: R1AA008
Language Package:EUROPE_4
CDA article: CDA102425/68
CDA version: R1A
Default article: cxc1250093
Default version: R1AA008

Network LOCKED
Operator: MULTIPLE

USERCODE:0000

Elapsed:6 secs.
ChipID:8040,EMP protocol:0301
OLD EROM, OVERRIDING COLOR
OLD EROM, OVERRIDING CID
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900924931 CERT:RED
DCU60 flashing only supported for RED CID49 phones ! <----------- ??
Elapsed:6 secs.

reactos · 02-22-2008, 01:48

your cid is 36 use gflash you can find it in se-nse.net

philippeb · 02-22-2008, 09:57

Ok, im really sorry to be wasting your time,
But i can't either find that gflash on the page :S
but instead i saw somthing else googleing in gflash, somthing called "FarManager", can that be used aswell ?

reactos · 02-22-2008, 10:13

here you have gflash http://rapidshare.com/files/93898438/GFlash20b6.zip

philippeb · 02-22-2008, 10:32

GFlash version 2.0 beta 6
**** REPAIRING/PATCHING STARTED ****
Turn off the phone.
Hold "C" button and plug USB cable.
Baseband ID: 8040
Protocol Version: 3.1
Flash ID: 200D
Phone color: RED
Phone is CID36
OTP Status: 0 PAF1 CID: 36
IMEI: 35682900924931
Started patching...
Patching W800 SW-R1BC002.vkp, please wait...
Patching completed.
Execution time: 00:07.375

Thanks a lot alot alot

Ive been trying for days to make the se work, and here you come and tell me about Gflash

, im in heaven,
Thanks

02-22-2008, 00:56	#1 (permalink)
philippeb Junior Member Join Date: Feb 2008 Posts: 13 Member: 707839 Status: Offline Thanks Meter: 0	need help with Se/xs w800 patch Hello, Lets make this short In Se i just follow 2 tuorial's (Saying the same but then im sure) And when it comes to where i shall put my patch in the Files/add box, But nothing appears ?, i tried to press "Flash" butten after, and still nothing. In Xs i allmost get the same, but under the patch section i insert my patch, and it just lets the "Extract" button stay grey or unavable or whatever called, Any suggestions, hope this is a FAQ :P

02-22-2008, 01:29	#3 (permalink)
philippeb Junior Member Join Date: Feb 2008 Posts: 13 Member: 707839 Status: Offline Thanks Meter: 0	So i just put it in misc And then press the flash button ? Cause now it's saying welcome to setool2 lite edition v 1.08 supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52 Loaded 51 flash descriptors ChipID:8040,EMP protocol:0301 OLD EROM, OVERRIDING COLOR OLD EROM, OVERRIDING CID PHONE IS RED RETAIL PRODUCT FLASH CID detected:49 Speed:921600 Flash ID check:200D Flash props sent ok OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900924931 CERT:RED FLASH CID:36 COLOR:RED MAPP CXC article: R1AA008 prgCXC1250092_EU_1_CA MAPP CXC version: R1AA008 Language Package:EUROPE_4 CDA article: CDA102425/68 CDA version: R1A Default article: cxc1250093 Default version: R1AA008 Network LOCKED Operator: MULTIPLE USERCODE:0000 Elapsed:6 secs. ChipID:8040,EMP protocol:0301 OLD EROM, OVERRIDING COLOR OLD EROM, OVERRIDING CID PHONE IS RED RETAIL PRODUCT FLASH CID detected:49 Speed:921600 OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900924931 CERT:RED DCU60 flashing only supported for RED CID49 phones ! <----------- ?? Elapsed:6 secs. Last edited by philippeb; 02-22-2008 at 01:33. Reason: Missed somthing

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need help with se tool	NKO	Old Ericsson Phones & Sony Phones	12	12-01-2009 14:04
Need help with Se K-310i	mobilelink	Sony Ericsson Hardware Repair	3	09-25-2008 04:41
need help with SE W710	addictz	Sony Ericsson	0	02-21-2008 06:04
Need help with SE W910i!!	xiuxiu19	KULANKENDI Server	21	01-06-2008 18:30
Need help with this patching problem	atifprince	Siemens-Benq Flash Patching	3	10-17-2003 22:00

02-22-2008, 01:20	#2 (permalink)
reactos No Life Poster Join Date: Aug 2006 Location: Patch unlock = non pro Posts: 1,086 Member: 323137 Status: Offline Thanks Meter: 235	the patch goes in misc

02-22-2008, 01:48	#4 (permalink)
reactos No Life Poster Join Date: Aug 2006 Location: Patch unlock = non pro Posts: 1,086 Member: 323137 Status: Offline Thanks Meter: 235	your cid is 36 use gflash you can find it in se-nse.net

02-22-2008, 09:57	#5 (permalink)
philippeb Junior Member Join Date: Feb 2008 Posts: 13 Member: 707839 Status: Offline Thanks Meter: 0	Ok, im really sorry to be wasting your time, But i can't either find that gflash on the page :S but instead i saw somthing else googleing in gflash, somthing called "FarManager", can that be used aswell ?

02-22-2008, 10:13	#6 (permalink)
reactos No Life Poster Join Date: Aug 2006 Location: Patch unlock = non pro Posts: 1,086 Member: 323137 Status: Offline Thanks Meter: 235	here you have gflash http://rapidshare.com/files/93898438/GFlash20b6.zip

02-22-2008, 10:32	#7 (permalink)
philippeb Junior Member Join Date: Feb 2008 Posts: 13 Member: 707839 Status: Offline Thanks Meter: 0	GFlash version 2.0 beta 6 ** REPAIRING/PATCHING STARTED ** Turn off the phone. Hold "C" button and plug USB cable. Baseband ID: 8040 Protocol Version: 3.1 Flash ID: 200D Phone color: RED Phone is CID36 OTP Status: 0 PAF1 CID: 36 IMEI: 35682900924931 Started patching... Patching W800 SW-R1BC002.vkp, please wait... Patching completed. Execution time: 00:07.375 Thanks a lot alot alot Ive been trying for days to make the se work, and here you come and tell me about Gflash , im in heaven, Thanks