No audio fix for T616 to T610 and T610 to T616 - FOUND - GSM-Forum

merwin · 01-21-2004, 18:46

This GDFS fix has worked for me in my quest to turn my T610 into a T616. The problem lies in the default acoustic settings of the phone. I can contribute this fix to a very knowledgable member of this forum.

Try the default acoustic file for the software that you're using (ie: if you went from T610 to T616, use the T616 default acoustics). If that doesn't work, try the other one.

This will fix the problem of not being able to hear anything when you make a call.

I've included the default acoustics for both the T610 and T616, but haven't tested it for a T616 to T610 conversion. It should work fine though.

Also, you may have to do a "Rebuild SP Area using OTP IMEI", if it gives you "Insert correct sim card"

Hope it works for you as well as it did for me. Let me know if this fixes your problems.

T610 Default Acoustics

T616 Default Acoustics

-merwin

Poca · 01-21-2004, 20:53

Nice work Merwin

Rgs
Poca

merwin · 01-21-2004, 21:10

Thanks poca :-)

minshei · 01-21-2004, 22:41

thanks a lot merwin ...

have you found out how to change the bandlock for T610?
for example, i want to make my T610 from 900/1800/1900
to 850/1800/1900 ...

Thanks again !
Great work !

merwin · 01-22-2004, 01:51

Unfortunately, I haven't figured that out yet... I'm actually not going to have access to better tools until next week. My travel got pushed back a week.

merwin · 01-28-2004, 18:42

The location for these GDFS files has changed. It's now:
http://merwin.bespin.org/gdfs

kennyli · 01-28-2004, 18:49

@merwin,

About the "T31x t30x t61x Bandlock 900-1800-1900", how to use it?

Thanks

Kenny

merwin · 01-28-2004, 18:54

Just flash it with DIV 8.x and afterwards you may need to do a rebuild sp area using otp imei... it'll bring the bandlock back to 900/1800/1900

merwin · 01-28-2004, 18:55

Also, I can't seem to edit posts that were made before the forum software was upgraded... strange... i wish i could update the links at the beginning of the page

kennyli · 01-28-2004, 18:57

@merwin,

Thanks for the reply.

But what is this for? To fix something?

I have a T616 converted to T610, but the 900 is not working.

Will I get the 900 back after flashing this GDFS?

merwin · 01-28-2004, 19:22

It's basically for T610 owners who converted to T616 and want to convert only the bandlock back to 900/1800/1900. It won't actually make 900mhz work if you have a T616

kennyli · 01-28-2004, 19:24

OK, I got it, thanks for your help

riolete · 01-29-2004, 00:36

Can you help me?

I live in Spain, and i have a T610. I uploaded to my t610 the R4C003_US3 firmware. Since then, sometimes, other people who call me don´t hear me. They hear a noise but i hear them very well. I uploaded then the R3C004_EU1 firmware and R6B004_EU1 one to my T610 and the problem still continue sometimes.

Can this file help me to fix the problem I have with my T610 mic?.

Thanks to all and sorry about my english..

cmk · 01-29-2004, 00:47

Quote:

Originally Posted by riolete

Can you help me?

I live in Spain, and i have a T610. I uploaded to my t610 the R4C003_US3 firmware. Since then, sometimes, other people who call me don´t hear me. They hear a noise but i hear them very well. I uploaded then the R3C004_EU1 firmware and R6B004_EU1 one to my T610 and the problem still continue sometimes.

Can this file help me to fix the problem I have with my T610 mic?.

Thanks to all and sorry about my english..

its hardware problem

ticemon · 01-29-2004, 17:04

For those who coverted from T616 to T610, use T610 Audio Fix on your T616 to fix the mic problem.

01-21-2004, 18:46	#1 (permalink)
merwin No Life Poster Join Date: Dec 2003 Location: Seattle, WA USA Age: 33 Posts: 618 Member: 47173 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	No audio fix for T616 to T610 and T610 to T616 - FOUND This GDFS fix has worked for me in my quest to turn my T610 into a T616. The problem lies in the default acoustic settings of the phone. I can contribute this fix to a very knowledgable member of this forum. Try the default acoustic file for the software that you're using (ie: if you went from T610 to T616, use the T616 default acoustics). If that doesn't work, try the other one. This will fix the problem of not being able to hear anything when you make a call. I've included the default acoustics for both the T610 and T616, but haven't tested it for a T616 to T610 conversion. It should work fine though. Also, you may have to do a "Rebuild SP Area using OTP IMEI", if it gives you "Insert correct sim card" Hope it works for you as well as it did for me. Let me know if this fixes your problems. T610 Default Acoustics T616 Default Acoustics -merwin Last edited by merwin; 01-21-2004 at 19:04.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
How to Transfer Songs and Videos from iPod to Computer and iPod to iTunes	merry921	iOS Application, games & media area	2	01-05-2013 07:40
flash file for lg b2050 to ufs and how to flash	mohd.asim	LG	1	06-03-2009 20:24
Need gdfs file to convert T610 to T630 and T630 to T610	mayer	Twisterflasher	4	10-12-2005 13:40
Vibrator NO-GO Fix for 33xx	kootp	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	12-04-2003 00:18

01-21-2004, 20:53	#2 (permalink)
Poca Freak Poster Join Date: May 2002 Location: Sweden Posts: 277 Member: 12318 Status: Offline Thanks: 0 Thanked 5 Times in 3 Posts	Nice work Merwin Rgs Poca

01-21-2004, 21:10	#3 (permalink)
merwin No Life Poster Join Date: Dec 2003 Location: Seattle, WA USA Age: 33 Posts: 618 Member: 47173 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	Thanks poca :-)

01-21-2004, 22:41	#4 (permalink)
minshei Junior Member Join Date: Dec 2003 Posts: 23 Member: 47696 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	thanks a lot merwin ... have you found out how to change the bandlock for T610? for example, i want to make my T610 from 900/1800/1900 to 850/1800/1900 ... Thanks again ! Great work !

01-22-2004, 01:51	#5 (permalink)
merwin No Life Poster Join Date: Dec 2003 Location: Seattle, WA USA Age: 33 Posts: 618 Member: 47173 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	Unfortunately, I haven't figured that out yet... I'm actually not going to have access to better tools until next week. My travel got pushed back a week.

01-28-2004, 18:42	#6 (permalink)
merwin No Life Poster Join Date: Dec 2003 Location: Seattle, WA USA Age: 33 Posts: 618 Member: 47173 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	The location for these GDFS files has changed. It's now: http://merwin.bespin.org/gdfs

01-28-2004, 18:49	#7 (permalink)
kennyli No Life Poster Join Date: Dec 2002 Location: Asia Posts: 896 Member: 19208 Status: Offline Thanks: 0 Thanked 2 Times in 1 Post	@merwin, About the "T31x t30x t61x Bandlock 900-1800-1900", how to use it? Thanks Kenny

01-28-2004, 18:54	#8 (permalink)
merwin No Life Poster Join Date: Dec 2003 Location: Seattle, WA USA Age: 33 Posts: 618 Member: 47173 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	Just flash it with DIV 8.x and afterwards you may need to do a rebuild sp area using otp imei... it'll bring the bandlock back to 900/1800/1900

01-28-2004, 18:55	#9 (permalink)
merwin No Life Poster Join Date: Dec 2003 Location: Seattle, WA USA Age: 33 Posts: 618 Member: 47173 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	Also, I can't seem to edit posts that were made before the forum software was upgraded... strange... i wish i could update the links at the beginning of the page

01-28-2004, 18:57	#10 (permalink)
kennyli No Life Poster Join Date: Dec 2002 Location: Asia Posts: 896 Member: 19208 Status: Offline Thanks: 0 Thanked 2 Times in 1 Post	@merwin, Thanks for the reply. But what is this for? To fix something? I have a T616 converted to T610, but the 900 is not working. Will I get the 900 back after flashing this GDFS?

01-28-2004, 19:22	#11 (permalink)
merwin No Life Poster Join Date: Dec 2003 Location: Seattle, WA USA Age: 33 Posts: 618 Member: 47173 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	It's basically for T610 owners who converted to T616 and want to convert only the bandlock back to 900/1800/1900. It won't actually make 900mhz work if you have a T616

01-28-2004, 19:24	#12 (permalink)
kennyli No Life Poster Join Date: Dec 2002 Location: Asia Posts: 896 Member: 19208 Status: Offline Thanks: 0 Thanked 2 Times in 1 Post	OK, I got it, thanks for your help

01-29-2004, 00:36	#13 (permalink)
riolete Junior Member Join Date: Jan 2004 Age: 37 Posts: 1 Member: 51051 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Can you help me? I live in Spain, and i have a T610. I uploaded to my t610 the R4C003_US3 firmware. Since then, sometimes, other people who call me don´t hear me. They hear a noise but i hear them very well. I uploaded then the R3C004_EU1 firmware and R6B004_EU1 one to my T610 and the problem still continue sometimes. Can this file help me to fix the problem I have with my T610 mic?. Thanks to all and sorry about my english..

01-29-2004, 17:04	#15 (permalink)
ticemon Junior Member Join Date: Dec 2003 Posts: 17 Member: 47942 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	For those who coverted from T616 to T610, use T610 Audio Fix on your T616 to fix the mic problem.