t610 imei problem - GSM-Forum

t100 · 10-05-2003, 22:24

i have tried to change imei on a 610 using div 8.2 all exe, when the phone was unlocked with the original imei all locks were open, when i changed the imei using a live imei number, the imei was changed on the phone, but all 4 locks were closed, tried remove 4 locks closed software but nothing happens, they still remain closed. change the imei back to original and all locks are open. does this mean that you cannot imei change the 610 or am i doing something wrong. would appreciate some advice from you guys. thanks in advance.. phoneman

KoTsK · 10-06-2003, 08:09

do "Change IMEI" and type in the IMEI numbers ... then flash the "patched" AVR flash.

t100 · 10-06-2003, 09:21

thanks for your help. works 1000%

radikale · 10-09-2003, 11:11

it´s possible to do the same(change the i m e i) in p800?

KoTsK · 10-09-2003, 16:45

for P800 if just needed to mark the checkbox "Change IMEI" and then enter the 15-digits IMEI number.

radikale · 10-09-2003, 17:19

many thanks!!!!

NBG · 10-09-2003, 22:29

BUT,even if you change imei on t610-emma recognizes phone by real imei,so be carefull.

karamusa · 10-09-2003, 22:56

which dongle do u use with div 8.2 crack

Drug_Store · 10-10-2003, 00:28

It´s terminator or DIV.

KoTsK · 10-10-2003, 07:00

@ NBG

no, u can ... i think. with a "patched" avr flash file

NBG · 10-10-2003, 12:10

@Kotsk
I have try yesterday just for knowledge to change imei on t610.Change imei reset gdfs upload patched avr and modem file.Imei has been changed phone workin allright.ok? BUT when I have put that phone on EMMA 2 it has recognized by real imei still.I dont know which imei phone sends to network I just want to people know about this

MPhoneClinic · 10-10-2003, 16:01

HI

i got T610 IMEI corrupted... i flash with AVR and ARM and Full GDFS,.. reset GDFS, and try to change IMEI or put back to original IMEI back.. but DIV8.2 always give me an error, i guess the Eprom problems..

and i know the DIV 8.2 is fine.. bcos i done a few phones already..

Any solution guys.

thanks

karamusa · 10-10-2003, 16:49

i mean which version of dongle works best

KoTsK · 10-10-2003, 19:59

@ NBG
after change imei then you reflash your phone with EMMA2, right? if so, then you need to "change imei" again, i think (cmiiw).

@ MPhoneClinic
try "make empty_board" trick

@ karamusa
i'm using terminator dongle 6.4 ... works fine with div 8.2 cracked.

NBG · 10-10-2003, 20:30

@kotsk please dont think

10-05-2003, 22:24	#1 (permalink)
t100 Insane Poster Join Date: Jan 2003 Age: 41 Posts: 99 Member: 19410 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	t610 imei problem i have tried to change imei on a 610 using div 8.2 all exe, when the phone was unlocked with the original imei all locks were open, when i changed the imei using a live imei number, the imei was changed on the phone, but all 4 locks were closed, tried remove 4 locks closed software but nothing happens, they still remain closed. change the imei back to original and all locks are open. does this mean that you cannot imei change the 610 or am i doing something wrong. would appreciate some advice from you guys. thanks in advance.. phoneman

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
t610 imei change problem	h0ydal	DIV	11	09-28-2006 19:04
T610 IMEI problem	MachF1rst	Sony Ericsson	7	08-22-2004 17:22
t610 4 lock closed and imei problem??	PaRoZ	Twisterflasher	0	02-17-2004 18:17
new t610 imei problem	t100	Sony Ericsson	1	12-19-2003 19:22
pls help with T610 imei corrupted :(	MPhoneClinic	Sony Ericsson	2	10-13-2003 06:04

10-06-2003, 08:09	#2 (permalink)
KoTsK No Life Poster Join Date: Nov 2002 Location: INDONESIA Posts: 990 Member: 17360 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	do "Change IMEI" and type in the IMEI numbers ... then flash the "patched" AVR flash.

10-06-2003, 09:21	#3 (permalink)
t100 Insane Poster Join Date: Jan 2003 Age: 41 Posts: 99 Member: 19410 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	thanks for your help. works 1000%

10-09-2003, 11:11	#4 (permalink)
radikale Insane Poster Join Date: Jul 2001 Location: Portugal Posts: 99 Member: 5287 Status: Offline Thanks: 10 Thanked 16 Times in 6 Posts	it´s possible to do the same(change the i m e i) in p800?

10-09-2003, 16:45	#5 (permalink)
KoTsK No Life Poster Join Date: Nov 2002 Location: INDONESIA Posts: 990 Member: 17360 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	for P800 if just needed to mark the checkbox "Change IMEI" and then enter the 15-digits IMEI number.

10-09-2003, 17:19	#6 (permalink)
radikale Insane Poster Join Date: Jul 2001 Location: Portugal Posts: 99 Member: 5287 Status: Offline Thanks: 10 Thanked 16 Times in 6 Posts	many thanks!!!!

10-09-2003, 22:29	#7 (permalink)
NBG Freak Poster Join Date: Jan 2001 Location: Beograd,Serbia Age: 43 Posts: 449 Member: 3101 Status: Offline Thanks: 2 Thanked 4 Times in 4 Posts	BUT,even if you change imei on t610-emma recognizes phone by real imei,so be carefull.

10-09-2003, 22:56	#8 (permalink)
karamusa No Life Poster Join Date: Nov 2001 Posts: 1,217 Member: 7352 Status: Offline Thanks: 70 Thanked 13 Times in 13 Posts	which dongle do u use with div 8.2 crack

10-10-2003, 00:28	#9 (permalink)
Drug_Store No Life Poster Join Date: Sep 2002 Location: Portugal Posts: 8,525 Member: 15312 Status: Offline Sonork: 100.1576041 Thanks: 0 Thanked 1,041 Times in 339 Posts	It´s terminator or DIV.

10-10-2003, 07:00	#10 (permalink)
KoTsK No Life Poster Join Date: Nov 2002 Location: INDONESIA Posts: 990 Member: 17360 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	@ NBG no, u can ... i think. with a "patched" avr flash file

10-10-2003, 12:10	#11 (permalink)
NBG Freak Poster Join Date: Jan 2001 Location: Beograd,Serbia Age: 43 Posts: 449 Member: 3101 Status: Offline Thanks: 2 Thanked 4 Times in 4 Posts	@Kotsk I have try yesterday just for knowledge to change imei on t610.Change imei reset gdfs upload patched avr and modem file.Imei has been changed phone workin allright.ok? BUT when I have put that phone on EMMA 2 it has recognized by real imei still.I dont know which imei phone sends to network I just want to people know about this

10-10-2003, 16:01	#12 (permalink)
MPhoneClinic No Life Poster Join Date: Feb 2003 Location: Aus. melbourne Age: 34 Posts: 1,669 Member: 20639 Status: Offline Thanks: 128 Thanked 228 Times in 88 Posts	HI i got T610 IMEI corrupted... i flash with AVR and ARM and Full GDFS,.. reset GDFS, and try to change IMEI or put back to original IMEI back.. but DIV8.2 always give me an error, i guess the Eprom problems.. and i know the DIV 8.2 is fine.. bcos i done a few phones already.. Any solution guys. thanks

10-10-2003, 16:49	#13 (permalink)
karamusa No Life Poster Join Date: Nov 2001 Posts: 1,217 Member: 7352 Status: Offline Thanks: 70 Thanked 13 Times in 13 Posts	i mean which version of dongle works best

10-10-2003, 19:59	#14 (permalink)
KoTsK No Life Poster Join Date: Nov 2002 Location: INDONESIA Posts: 990 Member: 17360 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	@ NBG after change imei then you reflash your phone with EMMA2, right? if so, then you need to "change imei" again, i think (cmiiw). @ MPhoneClinic try "make empty_board" trick @ karamusa i'm using terminator dongle 6.4 ... works fine with div 8.2 cracked.

10-10-2003, 20:30	#15 (permalink)
NBG Freak Poster Join Date: Jan 2001 Location: Beograd,Serbia Age: 43 Posts: 449 Member: 3101 Status: Offline Thanks: 2 Thanked 4 Times in 4 Posts	@kotsk please dont think