T610 won't turn OFF, which flash? - GSM-Forum

pchelpsi · 12-29-2004, 07:58

Hi to all !

Have strange problem that never happened to me before.
That it how it was:
I got this SE t610 for Unlocking. So I remove RSA, Unlock it and Flash it with T610_FullFlash_v1_EMEA2_R6B004_f.sbn , but phone was dead, won't turn ON.
So I upload also modem - ARM , T610_Modem_EU6_EU7_R6C005.arm and the phone was still dead.
I decided to flash it again with this T610_FullFlash_v1_EMEA2_R6B004_f.sbn and I used a difference modem file, T610_Modem_Standard_R3C002.arm .
Miracle happened and phone turn ON normally and it's unlocked.

But the problem is:
When I try to turn it OFF with SIM inside, it won't turn off totally, it freeze at de end, when the screen is blank but lights still ON and that's it. The most strange thing is that it turns OFF normally when there is no SIM kard inside.

What should I do? Flash it with another flash? Which one? If anyone have any suggestion, please help me.

Thanks in advance for any help or answer.

BR and happy new year.

Dejan

stigor · 12-29-2004, 09:32

I think sim card controller chip fails, located near joystick, left side and have number 2014 or somthing like that ...

hightechsquare · 12-29-2004, 09:33

So I upload also modem - ARM , T610_Modem_EU6_EU7_R6C005.arm and the phone was still dead.
I decided to flash it again with this T610_FullFlash_v1_EMEA2_R6B004_f.sbn and I used a difference modem file, T610_Modem_Standard_R3C002.arm
this the real problem use the same avr arm to flash

pchelpsi · 12-29-2004, 09:55

Thankd you both guys for your replays.
How its possible that its hardware problem if it was working OK befor I was flashing the phone?
I'm thinking too, that the problem is with flash... where can I download same AVR and ARM flash EMEA2 version for DIVLPT 5.0?

If someone have them, please send them on my email.

thanks

hightechsquare · 12-29-2004, 10:51

www.cellular-support.com

jode · 01-05-2005, 10:54

Phone worked OK until you try to flash it. Then won't torn on or show abnormal behaviour. This could happend if flash chip is damaged (or some ball have poor connection). If you put FULL FLASH (MCU and MODEM) + GDFS, and then repair CRC, phone must turn on if HW is OK. For SW files, look at www.cellular-support.com . Otherwise, rehot or reball flash IC.

Good luck !

Bi0H4z4rD · 01-05-2005, 15:19

Problem is because you dont use same modem and fw files. EU6 is only for EU6 fw.

R3 modem version is nor R6c!!!!!!!!!!

so please!!!!!!!!!!!! USE SAME VERSION ON MODEM AND ON FIRMWARE, OR USE STANDARD MODEM FILE!!!!!!

BR

12-29-2004, 07:58	#1 (permalink)
pchelpsi Freak Poster Join Date: Sep 2002 Location: Slovenia Age: 48 Posts: 431 Member: 15385 Status: Offline Thanks Meter: 9	T610 won't turn OFF, which flash? Hi to all ! Have strange problem that never happened to me before. That it how it was: I got this SE t610 for Unlocking. So I remove RSA, Unlock it and Flash it with T610_FullFlash_v1_EMEA2_R6B004_f.sbn , but phone was dead, won't turn ON. So I upload also modem - ARM , T610_Modem_EU6_EU7_R6C005.arm and the phone was still dead. I decided to flash it again with this T610_FullFlash_v1_EMEA2_R6B004_f.sbn and I used a difference modem file, T610_Modem_Standard_R3C002.arm . Miracle happened and phone turn ON normally and it's unlocked. But the problem is: When I try to turn it OFF with SIM inside, it won't turn off totally, it freeze at de end, when the screen is blank but lights still ON and that's it. The most strange thing is that it turns OFF normally when there is no SIM kard inside. What should I do? Flash it with another flash? Which one? If anyone have any suggestion, please help me. Thanks in advance for any help or answer. BR and happy new year. Dejan

12-29-2004, 09:55	#4 (permalink)
pchelpsi Freak Poster Join Date: Sep 2002 Location: Slovenia Age: 48 Posts: 431 Member: 15385 Status: Offline Thanks Meter: 9	Hmmm... Thankd you both guys for your replays. How its possible that its hardware problem if it was working OK befor I was flashing the phone? I'm thinking too, that the problem is with flash... where can I download same AVR and ARM flash EMEA2 version for DIVLPT 5.0? If someone have them, please send them on my email. thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BB 9500 won't turn on with flashing red light	naz13	BlackBerry (RIM)	4	10-19-2009 07:53
E90 won't turn on after flash!!!!!!	sunshinelin	Cyclonebox	4	07-07-2009 00:56
nokia 6102 keypad backlights won't turn off	jertapper	Nokia Hardware & Hardware Repair	1	06-19-2007 03:57
T610 won't turn OFF	pchelpsi	Sony Ericsson	4	01-05-2005 16:49
Nokia 8310 Won't turn off	Seeker44	Nokia Digital Core Technology 4 ( DCT-4 )	3	04-11-2004 09:00

12-29-2004, 09:32	#2 (permalink)
stigor No Life Poster Join Date: Feb 2002 Location: Serbia Posts: 878 Member: 9165 Status: Offline Thanks Meter: 0	I think sim card controller chip fails, located near joystick, left side and have number 2014 or somthing like that ...

12-29-2004, 09:33	#3 (permalink)
hightechsquare No Life Poster Join Date: Jun 2003 Location: в.мое& Age: 46 Posts: 819 Member: 32779 Status: Offline Thanks Meter: 90	So I upload also modem - ARM , T610_Modem_EU6_EU7_R6C005.arm and the phone was still dead. I decided to flash it again with this T610_FullFlash_v1_EMEA2_R6B004_f.sbn and I used a difference modem file, T610_Modem_Standard_R3C002.arm this the real problem use the same avr arm to flash

12-29-2004, 10:51	#5 (permalink)
hightechsquare No Life Poster Join Date: Jun 2003 Location: в.мое& Age: 46 Posts: 819 Member: 32779 Status: Offline Thanks Meter: 90	www.cellular-support.com

01-05-2005, 10:54	#6 (permalink)
jode Freak Poster Join Date: Mar 2004 Posts: 188 Member: 57254 Status: Offline Thanks Meter: 7	Phone worked OK until you try to flash it. Then won't torn on or show abnormal behaviour. This could happend if flash chip is damaged (or some ball have poor connection). If you put FULL FLASH (MCU and MODEM) + GDFS, and then repair CRC, phone must turn on if HW is OK. For SW files, look at www.cellular-support.com . Otherwise, rehot or reball flash IC. Good luck !

01-05-2005, 15:19	#7 (permalink)
Bi0H4z4rD No Life Poster Join Date: Feb 2004 Location: Here and there Age: 40 Posts: 1,603 Member: 52560 Status: Offline Thanks Meter: 226	Problem is because you dont use same modem and fw files. EU6 is only for EU6 fw. R3 modem version is nor R6c!!!!!!!!!! so please!!!!!!!!!!!! USE SAME VERSION ON MODEM AND ON FIRMWARE, OR USE STANDARD MODEM FILE!!!!!! BR