Terminator Error 0101 - GSM-Forum

fhwong · 04-21-2003, 12:47

i have the error 0101 when i conected the phone T68i. i use te corect value of xtal 14,7456

may be someone have an idea

mru · 03-12-2004, 07:56

I have had error 0101 because I have both HW totaltool and terminator.
I use one cable phone-DB25pin for them. There is wire from
pin11_db25 to pin3_ofthephone. But in terminator box the pin11_db25 is
used for inciurcit-programming of pic. Do not conect
pic_RB?_pin to pin11_db25 so this signal will be not affect phone or wise versa.

skedone · 03-12-2004, 14:22

try cleaning connectr on phones pins as 0101 is cable error

plruzza · 03-12-2004, 23:29

I had same problem, Error 0101 !!!
I chacked dongle, cables and conectors meny times but i didn't find anything wrong.
Finally I found how use it and confirm on T20 model and with "Read All Codes" and "Clear User Code" functions, only!
Unfortunately only that phone model is available for me in this moment.

How?

1. Conect dongle (USB and LPT)
2. Start software (I chaked with DIV v6.2, DIV v8.1_cracked, DIV v.8.2
cracked, v8.4 final_cracked, DIV USB v1.8, DIV USB v1.9, DIV USB v2.3
and I got same result).
2. Put phone model
3. Select Job(s)
4. Press "Do Selected Jobs"
5. When software ask for "Press <No> on phone conect cable on phone.
Than program start to work:

Bypass boot authority
Send App EEPROM
Read all codes
IMEI: xxxxxxxxxxxxxx
NCK: xxxxxxxx
NSCK: xxxxxxxx
CCK: xxxxxxxx
SPCK: xxxxxxxx
Operation succesfull

Please try my method, maybe it will work with other models also.
Post result.

Regards

plruzza · 03-14-2004, 21:12

Quote:

Originally Posted by plruzza

I had same problem, Error 0101 !!!
I chacked dongle, cables and conectors meny times but i didn't find anything wrong.
Finally I found how use it and confirm on T20 model and with "Read All Codes" and "Clear User Code" functions, only!
Unfortunately only that phone model is available for me in this moment.

How?

1. Conect dongle (USB and LPT)
2. Start software (I chaked with DIV v6.2, DIV v8.1_cracked, DIV v.8.2
cracked, v8.4 final_cracked, DIV USB v1.8, DIV USB v1.9, DIV USB v2.3
and I got same result).
2. Put phone model
3. Select Job(s)
4. Press "Do Selected Jobs"
5. When software ask for "Press <No> on phone conect cable on phone.
Than program start to work:

Bypass boot authority
Send App EEPROM
Read all codes
IMEI: xxxxxxxxxxxxxx
NCK: xxxxxxxx
NSCK: xxxxxxxx
CCK: xxxxxxxx
SPCK: xxxxxxxx
Operation succesfull

Please try my method, maybe it will work with other models also.
Post result.

Regards

Somethimes it is good to read User Manual:

Working steps

1. Plug phone WITHOUT battery to cable
2. Put the battery to phone
3. Do NOT power ON the phone!!
4. Make desired operation
5. Remove battery
6. Remove cable from phone's bottom connector

laytonanthony · 03-15-2004, 11:03

This is how i do it.
Put dongle in and start the program. Take the battery out of the phone and connect the cable. Then put battery in and select your job and then do it. If no luck try configuring the port in bios settings like i had to

ttsunlock · 03-15-2004, 15:14

Flat battery on phone gives 0101 as well.

yeldar · 03-16-2004, 15:41

Yes, as ttsunlock say, you must make sure batery is FULLY CHARGED, before attempting to use this software!

jabba · 03-17-2004, 22:10

tried the above, but still no luck
got four different dongles

any other solutions?

yeldar · 03-18-2004, 00:18

Try in a different pc in case port settings are not set properly

UHK · 03-18-2004, 00:42

TRY divlpt23
WORKING 100%

04-21-2003, 12:47	#1 (permalink)
fhwong Freak Poster Join Date: Jan 2003 Location: Malaysia Age: 46 Posts: 115 Member: 20370 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Terminator Error 0101 i have the error 0101 when i conected the phone T68i. i use te corect value of xtal 14,7456 may be someone have an idea

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
DIV Error 0101 when using terminator on Z600	Maître Désastre	Sony Ericsson	21	11-03-2004 11:23
terminator error 0101	melyse	Sony Ericsson	2	05-24-2003 17:18
Terminator error 0101 on t39	rtplan	Sony Ericsson	0	04-02-2003 03:41
terminator says error 0101	rw21914	Sony Ericsson	3	03-19-2003 10:12
terminator dongle error 0101	ahmed	Sony Ericsson	4	03-14-2003 07:10

03-12-2004, 07:56	#2 (permalink)
mru Freak Poster Join Date: Nov 2000 Posts: 195 Member: 2515 Status: Offline Thanks: 2 Thanked 4 Times in 4 Posts	I have had error 0101 because I have both HW totaltool and terminator. I use one cable phone-DB25pin for them. There is wire from pin11_db25 to pin3_ofthephone. But in terminator box the pin11_db25 is used for inciurcit-programming of pic. Do not conect pic_RB?_pin to pin11_db25 so this signal will be not affect phone or wise versa.

03-12-2004, 14:22	#3 (permalink)
skedone No Life Poster Join Date: Dec 2001 Location: 127.0.0.0.1 Posts: 505 Member: 8133 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	try cleaning connectr on phones pins as 0101 is cable error

03-12-2004, 23:29	#4 (permalink)
plruzza Freak Poster Join Date: Dec 1999 Location: 17 deg 49 min South Posts: 303 Member: 771 Status: Offline Thanks: 6 Thanked 9 Times in 5 Posts	I had same problem, Error 0101 !!! I chacked dongle, cables and conectors meny times but i didn't find anything wrong. Finally I found how use it and confirm on T20 model and with "Read All Codes" and "Clear User Code" functions, only! Unfortunately only that phone model is available for me in this moment. How? 1. Conect dongle (USB and LPT) 2. Start software (I chaked with DIV v6.2, DIV v8.1_cracked, DIV v.8.2 cracked, v8.4 final_cracked, DIV USB v1.8, DIV USB v1.9, DIV USB v2.3 and I got same result). 2. Put phone model 3. Select Job(s) 4. Press "Do Selected Jobs" 5. When software ask for "Press <No> on phone conect cable on phone. Than program start to work: Bypass boot authority Send App EEPROM Read all codes IMEI: xxxxxxxxxxxxxx NCK: xxxxxxxx NSCK: xxxxxxxx CCK: xxxxxxxx SPCK: xxxxxxxx Operation succesfull Please try my method, maybe it will work with other models also. Post result. Regards

03-15-2004, 11:03	#6 (permalink)
laytonanthony Insane Poster Join Date: Feb 2004 Location: Uk Age: 28 Posts: 89 Member: 55443 Status: Offline Thanks: 1 Thanked 15 Times in 8 Posts	This is how i do it. Put dongle in and start the program. Take the battery out of the phone and connect the cable. Then put battery in and select your job and then do it. If no luck try configuring the port in bios settings like i had to

03-15-2004, 15:14	#7 (permalink)
ttsunlock Freak Poster Join Date: Dec 2001 Location: UK Posts: 118 Member: 7894 Status: Offline Thanks: 0 Thanked 7 Times in 2 Posts	Flat battery on phone gives 0101 as well.

03-16-2004, 15:41	#8 (permalink)
yeldar No Life Poster Join Date: Jun 2002 Location: UK/España Age: 43 Posts: 1,604 Member: 12578 Status: Offline Thanks: 21 Thanked 62 Times in 48 Posts	Yes, as ttsunlock say, you must make sure batery is FULLY CHARGED, before attempting to use this software!

03-17-2004, 22:10	#9 (permalink)
jabba Freak Poster Join Date: Oct 2002 Location: London Age: 32 Posts: 235 Member: 16306 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	tried the above, but still no luck got four different dongles any other solutions?

03-18-2004, 00:18	#10 (permalink)
yeldar No Life Poster Join Date: Jun 2002 Location: UK/España Age: 43 Posts: 1,604 Member: 12578 Status: Offline Thanks: 21 Thanked 62 Times in 48 Posts	Try in a different pc in case port settings are not set properly

03-18-2004, 00:42	#11 (permalink)
UHK No Life Poster Join Date: Jul 2002 Posts: 1,734 Member: 13737 Status: Offline Sonork: 100.100725 Thanks: 237 Thanked 182 Times in 71 Posts	TRY divlpt23 WORKING 100%