unlock problem with k800i in setool - GSM-Forum

bharatg · 06-07-2012, 09:13

hi to all
iface strange unlock problem in k800i from t-mobile ,,,
here is log please seee them and give me suggestion ...when i unlock it, further procidure complite but last says rest file is bad can not flash it,,,i try many other rest file but same message comming....

SIGNED MODE (USING SERVER)
PRELOADER SECURITY BYPASS ENABLED
CFG:101111011000
ChipID:9900,EMP protocol:0301

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35570401902865 CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID: 2019
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader GDFS startup executed
loader FILESYSTEM startup executed

DISCONNECT PHONE NOW
INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
INSTALL PHONE MODEM DRIVERS IF NEEDED

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM95
PHONE READY TO PROCEED
EXECUTOR STARTED

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
FINALLY PRESS "READY"

ChipID:9900,EMP protocol:0301

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
STARTING BOOTLOADER...
INT LDR

B2020_PRELOADER_FOR_SETOOL2
LDR

B2020 LOADER FOR SETOOL2
FLASH ID: 2019
UPLOADING REST FILE "C:\Documents and Settings\WELCOME\Desktop\R1KG001_CXC1250210_GENERI C_WI.zip"...
bad file, will not flash it.
USERCODE RESET TO "0000"
Searching...
Firmware SIMLOCK check determined.
Unlock FINISHED
Elapsed: 143 secs.

kainero · 06-07-2012, 09:36

follow this procedure on how unlock k800i brother

open setools
check signed mode in settings
back to main
click recovery
go to empty refill tab
put gdfs ssw format from your setools folder (note: use same cid)
and click flash
click clear now put again erom
and then flash again

now open the phone and it's unlock

good luck brother

bharatg · 06-07-2012, 10:17

thanks for help ,, i follow your instruction then post result

***THE CLASH*** · 06-07-2012, 12:46

Quote:

Originally Posted by kainero

follow this procedure on how unlock k800i brother

open setools
check signed mode in settings
back to main
click recovery
go to empty refill tab
put gdfs ssw format from your setools folder (note: use same cid)
and click flash
click clear now put again erom
and then flash again

now open the phone and it's unlock

good luck brother

long winded way about things...

bharatg · 06-08-2012, 05:41

Quote:

Originally Posted by kainero

follow this procedure on how unlock k800i brother

open setools
check signed mode in settings
back to main
click recovery
go to empty refill tab
put gdfs ssw format from your setools folder (note: use same cid)
and click flash
click clear now put again erom
and then flash again

now open the phone and it's unlock

good luck brother

it"s working ... handset unlocked successfully

thanks brother ..thank a lot

06-07-2012, 09:13	#1 (permalink)
bharatg Freak Poster Join Date: Jul 2006 Location: jamnagar Posts: 326 Member: 321534 Status: Offline Thanks Meter: 18	unlock problem with k800i in setool hi to all iface strange unlock problem in k800i from t-mobile ,,, here is log please seee them and give me suggestion ...when i unlock it, further procidure complite but last says rest file is bad can not flash it,,,i try many other rest file but same message comming.... SIGNED MODE (USING SERVER) PRELOADER SECURITY BYPASS ENABLED CFG:101111011000 ChipID:9900,EMP protocol:0301 PHONE STATE: "RETAIL" FLASH CID: 0052 Speed:921600 OTP: LOCKED:1 CID:51 PAF:1 IMEI:35570401902865 CERT:RED FLASH CID:52 COLOR:RED PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0 LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015 FLASH ID: 2019 LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013 loader GDFS startup executed loader FILESYSTEM startup executed DISCONNECT PHONE NOW INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN INSTALL PHONE MODEM DRIVERS IF NEEDED SEARCHING FOR PHONE, "STOP" TO ABORT PHONE FOUND AT COM95 PHONE READY TO PROCEED EXECUTOR STARTED REMOVE CABLE FROM PHONE REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK FINALLY PRESS "READY" ChipID:9900,EMP protocol:0301 PHONE STATE: "RETAIL" FLASH CID: 0052 Speed:921600 STARTING BOOTLOADER... INT LDRB2020_PRELOADER_FOR_SETOOL2 LDRB2020 LOADER FOR SETOOL2 FLASH ID: 2019 UPLOADING REST FILE "C:\Documents and Settings\WELCOME\Desktop\R1KG001_CXC1250210_GENERI C_WI.zip"... bad file, will not flash it. USERCODE RESET TO "0000" Searching... Firmware SIMLOCK check determined. Unlock FINISHED Elapsed: 143 secs.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

06-07-2012, 09:36	#2 (permalink)
kainero Crazy Poster Join Date: Nov 2010 Location: middle of nowhere Posts: 51 Member: 1438685 Status: Offline Thanks Meter: 13	follow this procedure on how unlock k800i brother open setools check signed mode in settings back to main click recovery go to empty refill tab put gdfs ssw format from your setools folder (note: use same cid) and click flash click clear now put again erom and then flash again now open the phone and it's unlock good luck brother

06-07-2012, 10:17	#3 (permalink)
bharatg Freak Poster Join Date: Jul 2006 Location: jamnagar Posts: 326 Member: 321534 Status: Offline Thanks Meter: 18	thanks for help ,, i follow your instruction then post result