W810i Unlock Problem!... Plz help!
 

Hi, All. I have a Sony Ericsson W810i which i tried to unlock via Cruiser but would not give option to unlock. So tried it on the se-tool and it showed new security type so unlocked via server!

Now the phone is dead and dont have the correct file to unlock as its a CID 50 and flash file R1JC002. but cruiser and se-tool dont have this file so I can flash..

Please advise where i can get this file or what else I can do to unlock?


Thanks in Advance!

flash with cid49(RED) then flash FS and custormize your phone.
Note: Do not flash the ERROM area otherwise your phone will be dead
And there's noway you can repair ERROM so be carefull.:cool:

Eh, That works............ Thanks a Million!

Thanks again!

Cruiser also can unlock W810 cid50:

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID50 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 060712 1520 HAN_DB2012_FLASHLOADER_...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 50
Phone hardware initialized OK

[ --- Unlock RSA --- ]
Sending CS applet...
Applet ID: 060721 0900 GENCXC1327364_COMPACT_S...
Initializing CS applet...
Connecting to server...
Connection established, checking server status...
Server version: 2.20
Generating witness...
Your ID: user_D98E1410
Number of preceding users: 0
Credit: 16
Received successfully.
Calculating unlock data...
Received successfully.
Time: 00:00:03
Defeating RSA protection...
Restarting phone...
Connect the phone while holding its C button!
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER...
Sending applet...
Applet ID: 070602 0101 CRU_DB2010_PRODUCTIONLO...
Done.

[ --- Flash Main Firmware --- ]
Flash file: "W810i_CXC1250324_Baltic_R4ED001_Red50.cw81fs"
Flash file: "W810i_CXC1250316_Generic_R4EA031_Red50.cw81sw "
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:01:15
Preparing to program flash...
Programming flash...
Time: 00:02:45
Flash process done.

[ --- Direct Unlock --- ]
Analyzing firmware...
Preparing for direct unlock...
Processing...
Status: Success [O]
Creating firmware backup file...
Preparing to program flash...
Programming flash...
Time: 00:00:02
Flash process done.
If the phone cannot be turned on anymore, report its type and firmware version.
Done.

[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID50 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 060712 1520 HAN_DB2012_FLASHLOADER_...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 50
Phone hardware initialized OK

[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 070410 1405 HANCXC1327364_COMPACT_S...
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102555/1
Done.
Writing CDA Version MS string...
New value: R4A
Done.
Writing Default Article MS string...
New value: cxc1250324
Done.
Writing Default Version MS string...
New value: R4EK001
Done.
Writing langpack string...
New value: BALTIC
Done.
Writing country...
New value: Generic Trade
Done.
Uploading certificates...
Certificates uploaded successfuly.

[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.