Karbonn A12 no display hardbrick flash not worked - GSM-Forum

ajit4all · 11-20-2016, 12:37

Hello dear friends,

my mobile karbonn A12 MT6572 become hardbrick
don't know how its happened I m not playing with flashes too, just with some xposed other root apps...

there is no sign of display nor charging indication. but detected as mobistel device MT65xx preloader in pc. so I did hard flash using spflash tool shown download OK. but still unable to light up device.

please throw some idea on hardware level. how yo boot up or what other possible ways to find or get back on light.

memory test using spflash tool,below is result...
=========== Memory Detection Report ===========

Internal RAM:
Size = 0x00020000 (128KB)

External RAM:
Type = DRAM
Size = 0x20000000 (512MB/4096Mb)

NAND Flash:
ERROR: NAND Flash was not detected!

EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000e7000000(3696MB)

UFS:
ERROR: UFS was not detected!

============ RAM Test ============

Data Bus Test:
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15][D16][D17][D18][D19][D20][D21][D22][D23][D24][D25][D26][D27][D28][D29][D30][D31]
OK!!

Address Bus Test:
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28]
OK!!

RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!

Increment/Decrement Test:
Writing...
OK!!

============ EMMC Test ============

EMMC Pattern Test(0x5A5A):
(0x00600800),(0x00601000),(0x00601800),(0x00602000 ),(0x00602800),(0x00603000),(0x00603800),(0x006040 00),(0x00604800),(0x00605000),(0x00605800),(0x0060 6000),(0x0066800),(0x00607000),(0x00607800),(0x006 08000),(0x00608800),(0x00609000),(0x00609800),(0x0 060A000),(0x0060A800),(0x0060B000),(0x0060B800),(0 x0060C000),(0x0060C800),(x0060D000),(0x0060D800),( 0x0060E000),(0x0060E800),(0x0060F000),(0x0060F800) ,(0x00610000),(0x00610800),(0x00611000),(0x0061180 0),(0x00612000),(0x00612800),(0x0061300),(0x006138 00),(0x00614000),(0x00614800),(0x00615000),(0x0061 5800),(0x00616000),(0x00616800),(0x00617000),(0x00 617800),(0x00618000),(0x00618800),................ .............
Continues...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ...........
................................(0xC432C000),(0xC4 32C800),(0xC432D000),(0xC432D800),(0xC432E000),(0x C432E800),(0xC432F000),(0xC432F800),(0xC4330000),( 0xC4330800),(0xC4331000),(0xC4331800),(0xC4332000) ,(0xC4332800),(0xC4333000),(0xC4333800),(0xC433400 0),(0xC4334800),(0xC4335000),(0xC4335800),(0xC4336 000),(0xC4336800),(0xC4337000),(0xC4337800),(0xC43 38000),(0xC4338800),(0xC4339000),(0xC4339800),(0xC 433A000),(0xC433A800),(0xC433B000),(0xC433B800),(0 xC433C000),
FAILED!!

============ Memory Detection Report ===========

***MyGSM World*** · 11-21-2016, 10:52

Dear Friend,

I Don't Thing This Is Karbonn A12 Because A12 Has Broadcom CPU, But May Be It' Karbonn A12Plus.

ajit4all · 11-21-2016, 20:05

Dear friend,

I thought of writing a personal message to you by seeing your posts. surprisingly you are into my thread.

Yes the mobile is Karbonn A12 Plus (MT 6572). unfortunate the plus symbol is not previewed in post in title and message as well.

Bhai, please give some idea to boot back my Mobile. no new updates still I m struck there only. I have PCB pics I will post soon after finding a way.

ajit4all · 11-24-2016, 11:50

Dear friends

Please light up my mobile

ajit4all · 11-24-2016, 16:51

As i read somewhere MDT multi port tool works well with dead devices.
I am trying now with SP_MDT_v3.16 Tool.
Getting below error, although i selected both bin file and scatter file properly.
Bin file not fully loaded, Please check scatter and load setting.
I removed .ini file too , but still same error.

***MyGSM World*** · 11-24-2016, 21:10

Dear Friend,

Post Screenshot After Complete Flash Done.

11-20-2016, 12:37	#1 (permalink)
ajit4all Junior Member Join Date: Nov 2016 Posts: 4 Member: 2650981 Status: Offline Thanks Meter: 0	Karbonn A12 no display hardbrick flash not worked Hello dear friends, my mobile karbonn A12 MT6572 become hardbrick don't know how its happened I m not playing with flashes too, just with some xposed other root apps... there is no sign of display nor charging indication. but detected as mobistel device MT65xx preloader in pc. so I did hard flash using spflash tool shown download OK. but still unable to light up device. please throw some idea on hardware level. how yo boot up or what other possible ways to find or get back on light. memory test using spflash tool,below is result... =========== Memory Detection Report =========== Internal RAM: Size = 0x00020000 (128KB) External RAM: Type = DRAM Size = 0x20000000 (512MB/4096Mb) NAND Flash: ERROR: NAND Flash was not detected! EMMC: EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB) EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB) EMMC_PART_RPMB Size = 0x0000000000200000(2MB) EMMC_PART_GP1 Size = 0x0000000000000000(0MB) EMMC_PART_GP2 Size = 0x0000000000000000(0MB) EMMC_PART_GP3 Size = 0x0000000000000000(0MB) EMMC_PART_GP4 Size = 0x0000000000000000(0MB) EMMC_PART_USER Size = 0x00000000e7000000(3696MB) UFS: ERROR: UFS was not detected! ============ RAM Test ============ Data Bus Test: [D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15][D16][D17][D18][D19][D20][D21][D22][D23][D24][D25][D26][D27][D28][D29][D30][D31] OK!! Address Bus Test: [A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28] OK!! RAM Pattern Test : Writing ... 0x44332211, 0xA5A5A5A5, 0xA5A5A500, 0xA500A500, 0xA5000000, 0x00000000, 0xFFFF0000, 0xFFFFFFFF, OK!! Increment/Decrement Test: Writing... OK!! ============ EMMC Test ============ EMMC Pattern Test(0x5A5A): (0x00600800),(0x00601000),(0x00601800),(0x00602000 ),(0x00602800),(0x00603000),(0x00603800),(0x006040 00),(0x00604800),(0x00605000),(0x00605800),(0x0060 6000),(0x0066800),(0x00607000),(0x00607800),(0x006 08000),(0x00608800),(0x00609000),(0x00609800),(0x0 060A000),(0x0060A800),(0x0060B000),(0x0060B800),(0 x0060C000),(0x0060C800),(x0060D000),(0x0060D800),( 0x0060E000),(0x0060E800),(0x0060F000),(0x0060F800) ,(0x00610000),(0x00610800),(0x00611000),(0x0061180 0),(0x00612000),(0x00612800),(0x0061300),(0x006138 00),(0x00614000),(0x00614800),(0x00615000),(0x0061 5800),(0x00616000),(0x00616800),(0x00617000),(0x00 617800),(0x00618000),(0x00618800),................ ............. Continues...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ........... ................................(0xC432C000),(0xC4 32C800),(0xC432D000),(0xC432D800),(0xC432E000),(0x C432E800),(0xC432F000),(0xC432F800),(0xC4330000),( 0xC4330800),(0xC4331000),(0xC4331800),(0xC4332000) ,(0xC4332800),(0xC4333000),(0xC4333800),(0xC433400 0),(0xC4334800),(0xC4335000),(0xC4335800),(0xC4336 000),(0xC4336800),(0xC4337000),(0xC4337800),(0xC43 38000),(0xC4338800),(0xC4339000),(0xC4339800),(0xC 433A000),(0xC433A800),(0xC433B000),(0xC433B800),(0 xC433C000), FAILED!! ============ Memory Detection Report ===========

11-21-2016, 10:52	#2 (permalink)
*MyGSM World* Super Moderator Join Date: Jul 2009 Location: .:India:. Posts: 11,383 Member: 1078689 Status: Offline Sonork: 100.1626373 Thanks Meter: 2,826	Dear Friend, I Don't Thing This Is Karbonn A12 Because A12 Has Broadcom CPU, But May Be It' Karbonn A12Plus. __________________ Read The Rules Carefully!!! WBR MyGSM World.

11-24-2016, 21:10	#6 (permalink)
*MyGSM World* Super Moderator Join Date: Jul 2009 Location: .:India:. Posts: 11,383 Member: 1078689 Status: Offline Sonork: 100.1626373 Thanks Meter: 2,826	Dear Friend, Post Screenshot After Complete Flash Done. __________________ Read The Rules Carefully!!! WBR MyGSM World.

11-21-2016, 20:05	#3 (permalink)
ajit4all Junior Member Join Date: Nov 2016 Posts: 4 Member: 2650981 Status: Offline Thanks Meter: 0	Dear friend, I thought of writing a personal message to you by seeing your posts. surprisingly you are into my thread. Yes the mobile is Karbonn A12 Plus (MT 6572). unfortunate the plus symbol is not previewed in post in title and message as well. Bhai, please give some idea to boot back my Mobile. no new updates still I m struck there only. I have PCB pics I will post soon after finding a way.

11-24-2016, 11:50	#4 (permalink)
ajit4all Junior Member Join Date: Nov 2016 Posts: 4 Member: 2650981 Status: Offline Thanks Meter: 0	Dear friends Please light up my mobile

11-24-2016, 16:51	#5 (permalink)
ajit4all Junior Member Join Date: Nov 2016 Posts: 4 Member: 2650981 Status: Offline Thanks Meter: 0	As i read somewhere MDT multi port tool works well with dead devices. I am trying now with SP_MDT_v3.16 Tool. Getting below error, although i selected both bin file and scatter file properly. Bin file not fully loaded, Please check scatter and load setting. I removed .ini file too , but still same error.