2 pcs iPhone 2G No IMEI, No ICCID, Cant Make & Receice Calls - GSM-Forum

dannyogolo · 07-31-2009, 09:59

I have these 2 phone come almost same time.

The 1st phone:
This phone came with fault of "iPhone needs repair"
I had restored this with v3 firmware and it failed (error 23), then i used custom firmware 2.2.1, and it completed, BUT BOOTNEUTER stuck on "determinig setting"

The 2nd phone :
This phone came with fault of "Cant Make or Receive Calls (No IMEI or ICCID)"
I also restored this with firmware v3.0 . But the restore process continiued endlessly, and I had to pull the plug, now phone is stuck on "Itunes-usb arrow" logo.

I never knew this fault is difficult untill i did a search here, now i know.

Most of the solutions I saw were not conclusive and are very old. So I was wandering if there is any "NEW" solution.

Thanks and waiting

dannyogolo · 07-31-2009, 16:05

OK,
I updated the firmware to 2.2.1 custome and phone comes up, but still Cant Make or Receive Calls (No IMEI or ICCID)

duendecds · 07-31-2009, 16:33

1 - Donwroad 1.1.3,
2 - restore 1.1.4
3 - unlock activate, etc
4 - restore in dfu mode custom cydia onli 3.0

the end

dannyogolo · 07-31-2009, 16:47

I have 1.1.2 and 1.1.4 but I dont have 1.1.3

lorenzo roberto · 07-31-2009, 19:04

same problem... how could i determined version and bootloader of my i phone 2g 8gb cause when i insert at&t sim and connect it with i tunes it shows below

Let's get started

1. activate your i phone with at&t
2.register and get i tunes account
3.put your contacts,music and more on your i phone

then after i removed sim it shows unknown ccid..

how to solved this problem please give solution or links...

than!
ks

gochke · 08-01-2009, 07:37

in the 2nd iPhone problem is a Connection board is broken! and because you can't see IMEI in your iPhone...

Mad Scientist · 08-01-2009, 18:38

Quote:

Originally Posted by gochke

in the 2nd iPhone problem is a Connection board is broken! and because you can't see IMEI in your iPhone...

Maybe you mean to say is a "Comm board or Communication board" Not a connection board.

lorenzo roberto · 08-01-2009, 19:55

well problem solved thanks to all... 3.0

i just restored with i tunes
jailbreak and unlocked with redsnow 0.7.1

gochke · 08-01-2009, 20:05

Quote:

Originally Posted by Mad Scientist

Maybe you mean to say is a "Comm board or Communication board" Not a connection board.

yes you are right i mean to say communication board sorry

07-31-2009, 09:59	#1 (permalink)
dannyogolo No Life Poster Join Date: Nov 2002 Location: Nigeria Posts: 2,980 Member: 18200 Status: Offline Sonork: 100.1608286 Thanks Meter: 82	2 pcs iPhone 2G No IMEI, No ICCID, Cant Make & Receice Calls I have these 2 phone come almost same time. The 1st phone: This phone came with fault of "iPhone needs repair" I had restored this with v3 firmware and it failed (error 23), then i used custom firmware 2.2.1, and it completed, BUT BOOTNEUTER stuck on "determinig setting" The 2nd phone : This phone came with fault of "Cant Make or Receive Calls (No IMEI or ICCID)" I also restored this with firmware v3.0 . But the restore process continiued endlessly, and I had to pull the plug, now phone is stuck on "Itunes-usb arrow" logo. I never knew this fault is difficult untill i did a search here, now i know. Most of the solutions I saw were not conclusive and are very old. So I was wandering if there is any "NEW" solution. Thanks and waiting

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
iphone 3g no imei no iccid.....	Pica14	iPhone 4 / iPhone 4S	9	10-08-2011 13:41
iphone 2g no imei no iccid is there solution?	kades	iPhone 2 / iPhone 3G / iPhone 3GS	1	01-16-2010 01:01
(2G) No imei no wifi no iccid help me plz	sameerkochi	iPhone 2 / iPhone 3G / iPhone 3GS	1	12-05-2009 12:41
Iphone 3G 8GB- No IMEI NO ICCID Detected	remix007	iPhone 2 / iPhone 3G / iPhone 3GS	13	10-30-2008 02:48

07-31-2009, 16:05	#2 (permalink)
dannyogolo No Life Poster Join Date: Nov 2002 Location: Nigeria Posts: 2,980 Member: 18200 Status: Offline Sonork: 100.1608286 Thanks Meter: 82	OK, I updated the firmware to 2.2.1 custome and phone comes up, but still Cant Make or Receive Calls (No IMEI or ICCID)

07-31-2009, 16:33	#3 (permalink)
duendecds Crazy Poster Join Date: Jun 2004 Age: 44 Posts: 50 Member: 67588 Status: Offline Thanks Meter: 5	1 - Donwroad 1.1.3, 2 - restore 1.1.4 3 - unlock activate, etc 4 - restore in dfu mode custom cydia onli 3.0 the end

07-31-2009, 16:47	#4 (permalink)
dannyogolo No Life Poster Join Date: Nov 2002 Location: Nigeria Posts: 2,980 Member: 18200 Status: Offline Sonork: 100.1608286 Thanks Meter: 82	I have 1.1.2 and 1.1.4 but I dont have 1.1.3

07-31-2009, 19:04	#5 (permalink)
lorenzo roberto No Life Poster Join Date: Feb 2008 Posts: 1,006 Member: 701779 Status: Offline Sonork: 100.1622334 Thanks Meter: 121	same problem... how could i determined version and bootloader of my i phone 2g 8gb cause when i insert at&t sim and connect it with i tunes it shows below Let's get started 1. activate your i phone with at&t 2.register and get i tunes account 3.put your contacts,music and more on your i phone then after i removed sim it shows unknown ccid.. how to solved this problem please give solution or links... than! ks

08-01-2009, 07:37	#6 (permalink)
gochke Freak Poster Join Date: Jun 2009 Location: Georgia, Tbilisi. Posts: 128 Member: 1057286 Status: Offline Thanks Meter: 14	in the 2nd iPhone problem is a Connection board is broken! and because you can't see IMEI in your iPhone...

08-01-2009, 19:55	#8 (permalink)
lorenzo roberto No Life Poster Join Date: Feb 2008 Posts: 1,006 Member: 701779 Status: Offline Sonork: 100.1622334 Thanks Meter: 121	well problem solved thanks to all... 3.0 i just restored with i tunes jailbreak and unlocked with redsnow 0.7.1