iPhone 3gs 6.1.6 Jailbreak Unlock Sucessfully

[vritol]

Originally Posted by hassananwer

iphone 3gs 6.1.6 jailbreak unlock susesfull

3gs iPhone2,1_6.1.6_10B500_Restore untethered jailbreak & unlock

1) Restore your device with iPhone2,1_6.1.6_10B500
2) Jailbreak
2.1) Open redsn0w_win_0.9.15b3
2.2) Go to extra
2.3) Go to select ipsw
2.4) Select iPhone2,1_6.0_10A403_Restore
2.5) Back
2.6) Jailbreak
2.7) Next, follow the instructions to enter dfu mode
2.8) Check install cydia & install ipad baseband
2.9) Wait until jailbreak done

3) There will be no cydia in your device
3.1) Open redsn0w_win_0.9.15b3
3.2) Go to extra
3.3) Go to select ipsw
3.4) Select iPhone2,1_6.0_10A403_Restore
3.5) Go To Just boot
3.6) Follow the instructions to enter dfu mode
4) after device on u can see cydia
5) Open Cydia.
6) Click the "Changes" tab in the footer.
7) Press the "Refresh" button in the top left corner.
8) After "Reloading Data", perform a search for "p0sixspwn" (the O is a zero).
9) Tap Install.
10) After installing p0sixspwn your device is untethered
11) Install ultrasnow 1.2.8


1000% network done

It didn't work for me but this tuto worked! jailbreakqaDUTcom/questions/32462/frequently-asked-questions?page=1&focusedAnswerId=153674#153674 (replace DUT in link by .)

I needed to install first utrasn0w and then p0sixspwn. Also after a fresh restore with itunes to 6.1.6 i didn't activate my iphone, i just proceeded straight to the steps describe tin the linked tuto.

I got sometimes stuck in recovery loop so here as the steps to get out of recovery mode into DFU mode
1 connect phone to computer
2 opens Itunes
3 Do a reset by pressing and holding both home and power buttons for several seconds.
4 As soon as it resets (screen goes black), immediately release both buttons.
5 Immediately press and hold the power button again.
6 Wait until you see the Apple logo plus one second longer.
7 Now press additionally the home button (still don't let go of the power button).
8 Wait until the screen disappears (gets black) plus one second longer.
9 Now release the power button, but keep pressing the home button.
10 Wait until you hear a "connected" sound from iTunes.
11 You should now be in DFU mode and your screen should be black. If you see the USB logo instead, try again.

[lrcorales]

Originally Posted by hassananwer

iphone 3gs 6.1.6 jailbreak unlock susesfull

3gs iPhone2,1_6.1.6_10B500_Restore untethered jailbreak & unlock

1) Restore your device with iPhone2,1_6.1.6_10B500
2) Jailbreak
2.1) Open redsn0w_win_0.9.15b3
2.2) Go to extra
2.3) Go to select ipsw
2.4) Select iPhone2,1_6.0_10A403_Restore
2.5) Back
2.6) Jailbreak
2.7) Next, follow the instructions to enter dfu mode
2.8) Check install cydia & install ipad baseband
2.9) Wait until jailbreak done

3) There will be no cydia in your device
3.1) Open redsn0w_win_0.9.15b3
3.2) Go to extra
3.3) Go to select ipsw
3.4) Select iPhone2,1_6.0_10A403_Restore
3.5) Go To Just boot
3.6) Follow the instructions to enter dfu mode
4) after device on u can see cydia
5) Open Cydia.
6) Click the "Changes" tab in the footer.
7) Press the "Refresh" button in the top left corner.
8) After "Reloading Data", perform a search for "p0sixspwn" (the O is a zero).
9) Tap Install.
10) After installing p0sixspwn your device is untethered
11) Install ultrasnow 1.2.8


1000% network done

thank bro.. 1000% network done

[benypavon]

baseband 6.15 or 5.13 ?

[doriwala1]

Warning Don't install iPad Baseband in iPhone 3GS 8GB

[vijay35]

What does it mean of serial no 134 or later in iphone 3gs

[asadnow2k]

i wanna know the base band info too. on 6.15 no signals.

Originally Posted by benypavon

baseband 6.15 or 5.13 ?

[babar_q2]

iphone 3gs 6.1.6 jailbreak unlock susesfull

3gs iPhone2,1_6.1.6_10B500_Restore untethered jailbreak & unlock

1) Restore your device with iPhone2,1_6.1.6_10B500
2) Jailbreak
2.1) Open redsn0w_win_0.9.15b3
2.2) Go to extra
2.3) Go to select ipsw
2.4) Select iPhone2,1_6.0_10A403_Restore
2.5) Back
2.6) Jailbreak
2.7) Next, follow the instructions to enter dfu mode
2.8) Check install cydia & install ipad baseband
2.9) Wait until jailbreak done

3) There will be no cydia in your device
3.1) Open redsn0w_win_0.9.15b3
3.2) Go to extra
3.3) Go to select ipsw
3.4) Select iPhone2,1_6.0_10A403_Restore
3.5) Go To Just boot
3.6) Follow the instructions to enter dfu mode
4) after device on u can see cydia
5) Open Cydia.
6) Click the "Changes" tab in the footer.
7) Press the "Refresh" button in the top left corner.
8) After "Reloading Data", perform a search for "p0sixspwn" (the O is a zero).
9) Tap Install.
10) After installing p0sixspwn your device is untethered
11) Install ultrasnow 1.2.8


1000% network done
Report Post

[jaibhawani]

1000000% ok i tested

[luckysable]

Originally Posted by Aliip5

Dont restart just after booting Tethered repring two or three times. Message issue will be ok.


Sent from my iPhone using Tapatalk

Bro can u explane how to do Tethered repring,,
Plz , i have problem with 3gs,

[bshra]

sms problem solved with handcent no cydia

[nyc_pop911]

3ayez a enta ??? enta msh fahem di moshkeltak ta3alaly w ana afahemak

[frankcelular1]

i did one yesturday but

get no service no service and i did all the procese

like show here

and when i put 4.1 again

is full signal and working fine

[yargich]

Originally Posted by bshra

sms problem solved with handcent no cydia

how to fix sms problem
...........................................

[hassananwer]

Just follow the instructions properly and in the end just restart the phone your sms problem will be solved 1000000% tested

[kharimobiles]

iphone 3gs 6.1.6 jailbreak unlock susesfull

3gs iPhone2,1_6.1.6_10B500_Restore untethered jailbreak & unlock

1) Restore your device with iPhone2,1_6.1.6_10B500
2) Jailbreak
2.1) Open redsn0w_win_0.9.15b3
2.2) Go to extra
2.3) Go to select ipsw
2.4) Select iPhone2,1_6.0_10A403_Restore
2.5) Back
2.6) Jailbreak
2.7) Next, follow the instructions to enter dfu mode
2.8) Check install cydia & install ipad baseband
2.9) Wait until jailbreak done

3) There will be no cydia in your device
3.1) Open redsn0w_win_0.9.15b3
3.2) Go to extra
3.3) Go to select ipsw
3.4) Select iPhone2,1_6.0_10A403_Restore
3.5) Go To Just boot
3.6) Follow the instructions to enter dfu mode
4) after device on u can see cydia
5) Open Cydia.
6) Click the "Changes" tab in the footer.
7) Press the "Refresh" button in the top left corner.
8) After "Reloading Data", perform a search for "p0sixspwn" (the O is a zero).
9) Tap Install.
10) After installing p0sixspwn your device is untethered
11) Install ultrasnow 1.2.8


1000% network done
Report Post