QFIL (Sahara) and Test Point

[vaterpahk]

Mr. Sha, you can add real ways to enter port 9008 mode to the program interface? For example through the test point with a description of its location, for example output of images?
For example:
Huawei DLI-TL20
Test point is located on the Board under the camera, close the two points, insert the cable, get port 9008.
Huawei DLI-TL20 (Honor 6A LTE DS Delhi) at Auto Select Flash Port [SAHARA] {Reset FRP}
QDL USB Com: Vid_05c6&Pid_9008 (COM4)
SAHARA VERS: 2.1
SAHARA HWID: 0004F0E100150042 [MSM8937]
SAHARA HASH: 6BC369511DA9CADB3A7AF61574F89DB385003D6241BDD1FF57 3DBA61BF6AE119
SAHARA SERN: CC359B8E (3426065294)
SAHARA PROG: prog_emmc_firehose_8937_ddr_hua.mbn
SAHARA PRID: SA6AD99D2A3397930E
FHPROG SZFT: 4096
FHPROG SZTT: 131072
FHPROG SPTT: 1048576
FHPROG XSIZ: 4096
FHPROG VERS: 1
FHPROG PLTF: 8937
FHPROG MEMT: eMMC
FHINFO DSK0: 30535680 x 512 Sectors (14,56 GB)
FHINFO DSK1: 8192 x 512 Sectors (4 MB)
FHINFO DSK2: 8192 x 512 Sectors (4 MB)
FHINFO MENM: QE13MB
FHINFO MESN: 1ECC96AF (516724399)
FHPROG PART: EFI GPT
FHPROG PRTY: 0
Reset FRP Done in: 00:00.200 (1)