***** sch -I545 remove password w/o data loss Failed***********[ANSWERED] - GSM-Forum

Gambitv01 · 04-13-2015, 05:08

Fw.Ver : BstKey V3.24
Serial : 20EE-3F20-5B39-6C00
Active User: SalmanSaleem
PL2303 : NULL
Best Smart Tools, Load OK.
-----------------------------------------------------
Download: Press Vol Dn + Home + Power

Scanning devices ... 1 found
dev[1]
Manufactory:
Model:
Hardware:
Mode: Need Read Info
Device Info (MTP)
Model: SCH-I545
IMEI: 990004383014168
PDA Version: I545VRUFNC5
Phone Version: I545VRUFNC5
CSC : I545VZWFNC5
CSC Version: I545VRUFNC5
Time used : 33.5 s

Connect to server ... No image for download
Connect to server ... No image for download
Unlock ... failed to connect device
Prepare environment ... Device do not have ADB interface, turn on device USB DEBUG and connect with usb cable,then re-scan device
Need reboot device to normal
Time used : 1 min 3 s

----------------------------------------------------
1. Make sure device with third-party recovery (eg: CWM, ADB needed) before proceeding.
2. If the current device cannot auto enter recovery mode, enter recovery mode manually.
Normally enter recovery mode as follows:
1). Vol Up + Home + Power (or Vol Dn)
2). Vol Up + Power (or Vol Dn)
----------------------------------------------------
Reboot device to RECOVERY mode ... not support this operation
Reboot device to RECOVERY mode ... Can't open port COM3
Reboot device to RECOVERY mode ... Can't open port COM3
Reboot device to RECOVERY mode ... communication failed

Scanning devices ... 0 found

Scanning devices ... 0 found

Scanning devices ... 0 found

----------------------------------------------------
1. Make sure device with third-party recovery (eg: CWM, ADB needed) before proceeding.
2. If the current device cannot auto enter recovery mode, enter recovery mode manually.
Normally enter recovery mode as follows:
1). Vol Up + Home + Power (or Vol Dn)
2). Vol Up + Power (or Vol Dn)
----------------------------------------------------
Current mode is unknown
Reboot device to RECOVERY mode ... communication failed
Device Info (UART) ... failed
Time used : 8.6 s

Scanning devices ... 0 found

Scanning devices ... 0 found

Scanning devices ... 1 found
dev[1]
Manufactory:
Model:
Hardware:
Mode: Need Read Info

Scanning devices ... 1 found
dev[1]
Manufactory:
Model:
Hardware:
Mode: Need Read Info
Device Info (MTP)
Model: SCH-I545
IMEI: 990004383014168
PDA Version: I545VRUFNC5
Phone Version: I545VRUFNC5
CSC : I545VZWFNC5
CSC Version: I545VRUFNC5
Time used : 33.4 s

Unlock ... failed to connect device
Prepare environment ... Device do not have ADB interface, turn on device USB DEBUG and connect with usb cable,then re-scan device
Need reboot device to normal
Time used : 1 min 3 s

Gambitv01 · 04-13-2015, 05:34

Fw.Ver : BstKey V3.24
Serial : 20EE-3F20-5B39-6C00
Active User: SalmanSaleem
PL2303 : NULL
Best Smart Tools, Load OK.
-----------------------------------------------------
Download: Press Vol Dn + Home + Power

Scanning devices ... 1 found
dev[1]
Manufactory:
Model:
Hardware:
Mode: Need Read Info
Device Info (MTP)
Model: SCH-I545
IMEI: 990004383014168
PDA Version: I545VRUFNC5
Phone Version: I545VRUFNC5
CSC : I545VZWFNC5
CSC Version: I545VRUFNC5
Time used : 33.5 s

Connect to server ... No image for download
Connect to server ... No image for download
Unlock ... failed to connect device
Prepare environment ... Device do not have ADB interface, turn on device USB DEBUG and connect with usb cable,then re-scan device
Need reboot device to normal
Time used : 1 min 3 s

----------------------------------------------------
1. Make sure device with third-party recovery (eg: CWM, ADB needed) before proceeding.
2. If the current device cannot auto enter recovery mode, enter recovery mode manually.
Normally enter recovery mode as follows:
1). Vol Up + Home + Power (or Vol Dn)
2). Vol Up + Power (or Vol Dn)
----------------------------------------------------
Reboot device to RECOVERY mode ... not support this operation
Reboot device to RECOVERY mode ... Can't open port COM3
Reboot device to RECOVERY mode ... Can't open port COM3
Reboot device to RECOVERY mode ... communication failed

Scanning devices ... 0 found

Scanning devices ... 0 found

Scanning devices ... 0 found

----------------------------------------------------
1. Make sure device with third-party recovery (eg: CWM, ADB needed) before proceeding.
2. If the current device cannot auto enter recovery mode, enter recovery mode manually.
Normally enter recovery mode as follows:
1). Vol Up + Home + Power (or Vol Dn)
2). Vol Up + Power (or Vol Dn)
----------------------------------------------------
Current mode is unknown
Reboot device to RECOVERY mode ... communication failed
Device Info (UART) ... failed
Time used : 8.6 s

Scanning devices ... 0 found

Scanning devices ... 0 found

Scanning devices ... 1 found
dev[1]
Manufactory:
Model:
Hardware:
Mode: Need Read Info

Scanning devices ... 1 found
dev[1]
Manufactory:
Model:
Hardware:
Mode: Need Read Info
Device Info (MTP)
Model: SCH-I545
IMEI: 990004383014168
PDA Version: I545VRUFNC5
Phone Version: I545VRUFNC5
CSC : I545VZWFNC5
CSC Version: I545VRUFNC5
Time used : 33.4 s

Unlock ... failed to connect device
Prepare environment ... Device do not have ADB interface, turn on device USB DEBUG and connect with usb cable,then re-scan device
Need reboot device to normal
Time used : 1 min 3 s

Log saved to: C:\Users\Owner\Desktop\Log 2015-04-12 23.52.33.txt
Connect to server ... No image for download
Connect to server ... No image for download
Connect to server ... No image for download
Connect to server ... No image for download
Connect to server ... No image for download
Connect to server ... No image for download
Connect to server ... No image for download

----------------------------------------------------
1. Make sure device with third-party recovery (eg: CWM, ADB needed) before proceeding.
2. If the current device cannot auto enter recovery mode, enter recovery mode manually.
Normally enter recovery mode as follows:
1). Vol Up + Home + Power (or Vol Dn)
2). Vol Up + Power (or Vol Dn)
----------------------------------------------------
Reboot device to RECOVERY mode ... not support this operation
Connect to server ... No image for download

-Mosin- · 04-13-2015, 06:08

Think it is connection problem, or Driver Issue ...!
install PDANet And Moborobo and reboot pc
And Use Good Cable.....

Gambitv01 · 04-13-2015, 06:20

i try on 2 different computers

Gambitv01 · 04-14-2015, 19:22

I545VRUFNC5 were can i get this fw?

**AsiaGSM™** · 04-14-2015, 22:11

you need custom recovery if you want safe user data

Gambitv01 · 04-15-2015, 19:06

Quote:

Originally Posted by UnlockKing.pk

you need custom recovery if you want safe user data

how can i get custom recovery? for this model?

Gambitv01 · 04-16-2015, 20:02

Quote:

Originally Posted by Gambitv01

how can i get custom recovery? for this model?

forgger · 04-16-2015, 20:51

Quote:

Originally Posted by Gambitv01

how can i get custom recovery? for this model?

Go to GalaxyS4Root.com
Under CLOCKWORKMOD/TWRP RECOVERY you will find custom recovery for your s4 sch-i545

Sent from my GT-I9500 using Tapatalk

Gambitv01 · 04-17-2015, 03:16

Quote:

Originally Posted by forgger

Go to GalaxyS4Root.com
Under CLOCKWORKMOD/TWRP RECOVERY you will find custom recovery for your s4 sch-i545

Sent from my GT-I9500 using Tapatalk

is it for that certain firmware?

Gambitv01 · 04-18-2015, 17:14

Quote:

Originally Posted by forgger

Go to GalaxyS4Root.com
Under CLOCKWORKMOD/TWRP RECOVERY you will find custom recovery for your s4 sch-i545

Sent from my GT-I9500 using Tapatalk

i dont see custom recovery for that particular model?

Gambitv01 · 04-18-2015, 17:21

i dont see custom recovery for that particular model?or this particular version I54VRUFNC5

Gambitv01 · 04-18-2015, 17:22

Quote:

Originally Posted by forgger

Go to GalaxyS4Root.com
Under CLOCKWORKMOD/TWRP RECOVERY you will find custom recovery for your s4 sch-i545

Sent from my GT-I9500 using Tapatalk

i dont see custom recovery for that particular model?or this particular version I54VRUFNC5

maniarneja · 04-18-2015, 20:34

Bro manualy go to recovery mode nd tick recovery unlock ur problem solved.....

Gambitv01 · 04-19-2015, 20:57

Quote:

Originally Posted by maniarneja

Bro manualy go to recovery mode nd tick recovery unlock ur problem solved.....

let me try i will let you know

04-13-2015, 05:08	#1 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	*** sch -I545 remove password w/o data loss Failed*********[ANSWERED] Fw.Ver : BstKey V3.24 Serial : 20EE-3F20-5B39-6C00 Active User: SalmanSaleem PL2303 : NULL Best Smart Tools, Load OK. ----------------------------------------------------- Download: Press Vol Dn + Home + Power Scanning devices ... 1 found dev[1] Manufactory: Model: Hardware: Mode: Need Read Info Device Info (MTP) Model: SCH-I545 IMEI: 990004383014168 PDA Version: I545VRUFNC5 Phone Version: I545VRUFNC5 CSC : I545VZWFNC5 CSC Version: I545VRUFNC5 Time used : 33.5 s Connect to server ... No image for download Connect to server ... No image for download Unlock ... failed to connect device Prepare environment ... Device do not have ADB interface, turn on device USB DEBUG and connect with usb cable,then re-scan device Need reboot device to normal Time used : 1 min 3 s ---------------------------------------------------- 1. Make sure device with third-party recovery (eg: CWM, ADB needed) before proceeding. 2. If the current device cannot auto enter recovery mode, enter recovery mode manually. Normally enter recovery mode as follows: 1). Vol Up + Home + Power (or Vol Dn) 2). Vol Up + Power (or Vol Dn) ---------------------------------------------------- Reboot device to RECOVERY mode ... not support this operation Reboot device to RECOVERY mode ... Can't open port COM3 Reboot device to RECOVERY mode ... Can't open port COM3 Reboot device to RECOVERY mode ... communication failed Scanning devices ... 0 found Scanning devices ... 0 found Scanning devices ... 0 found ---------------------------------------------------- 1. Make sure device with third-party recovery (eg: CWM, ADB needed) before proceeding. 2. If the current device cannot auto enter recovery mode, enter recovery mode manually. Normally enter recovery mode as follows: 1). Vol Up + Home + Power (or Vol Dn) 2). Vol Up + Power (or Vol Dn) ---------------------------------------------------- Current mode is unknown Reboot device to RECOVERY mode ... communication failed Device Info (UART) ... failed Time used : 8.6 s Scanning devices ... 0 found Scanning devices ... 0 found Scanning devices ... 1 found dev[1] Manufactory: Model: Hardware: Mode: Need Read Info Scanning devices ... 1 found dev[1] Manufactory: Model: Hardware: Mode: Need Read Info Device Info (MTP) Model: SCH-I545 IMEI: 990004383014168 PDA Version: I545VRUFNC5 Phone Version: I545VRUFNC5 CSC : I545VZWFNC5 CSC Version: I545VRUFNC5 Time used : 33.4 s Unlock ... failed to connect device Prepare environment ... Device do not have ADB interface, turn on device USB DEBUG and connect with usb cable,then re-scan device Need reboot device to normal Time used : 1 min 3 s

04-13-2015, 05:34	#2 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	Fw.Ver : BstKey V3.24 Serial : 20EE-3F20-5B39-6C00 Active User: SalmanSaleem PL2303 : NULL Best Smart Tools, Load OK. ----------------------------------------------------- Download: Press Vol Dn + Home + Power Scanning devices ... 1 found dev[1] Manufactory: Model: Hardware: Mode: Need Read Info Device Info (MTP) Model: SCH-I545 IMEI: 990004383014168 PDA Version: I545VRUFNC5 Phone Version: I545VRUFNC5 CSC : I545VZWFNC5 CSC Version: I545VRUFNC5 Time used : 33.5 s Connect to server ... No image for download Connect to server ... No image for download Unlock ... failed to connect device Prepare environment ... Device do not have ADB interface, turn on device USB DEBUG and connect with usb cable,then re-scan device Need reboot device to normal Time used : 1 min 3 s ---------------------------------------------------- 1. Make sure device with third-party recovery (eg: CWM, ADB needed) before proceeding. 2. If the current device cannot auto enter recovery mode, enter recovery mode manually. Normally enter recovery mode as follows: 1). Vol Up + Home + Power (or Vol Dn) 2). Vol Up + Power (or Vol Dn) ---------------------------------------------------- Reboot device to RECOVERY mode ... not support this operation Reboot device to RECOVERY mode ... Can't open port COM3 Reboot device to RECOVERY mode ... Can't open port COM3 Reboot device to RECOVERY mode ... communication failed Scanning devices ... 0 found Scanning devices ... 0 found Scanning devices ... 0 found ---------------------------------------------------- 1. Make sure device with third-party recovery (eg: CWM, ADB needed) before proceeding. 2. If the current device cannot auto enter recovery mode, enter recovery mode manually. Normally enter recovery mode as follows: 1). Vol Up + Home + Power (or Vol Dn) 2). Vol Up + Power (or Vol Dn) ---------------------------------------------------- Current mode is unknown Reboot device to RECOVERY mode ... communication failed Device Info (UART) ... failed Time used : 8.6 s Scanning devices ... 0 found Scanning devices ... 0 found Scanning devices ... 1 found dev[1] Manufactory: Model: Hardware: Mode: Need Read Info Scanning devices ... 1 found dev[1] Manufactory: Model: Hardware: Mode: Need Read Info Device Info (MTP) Model: SCH-I545 IMEI: 990004383014168 PDA Version: I545VRUFNC5 Phone Version: I545VRUFNC5 CSC : I545VZWFNC5 CSC Version: I545VRUFNC5 Time used : 33.4 s Unlock ... failed to connect device Prepare environment ... Device do not have ADB interface, turn on device USB DEBUG and connect with usb cable,then re-scan device Need reboot device to normal Time used : 1 min 3 s Log saved to: C:\Users\Owner\Desktop\Log 2015-04-12 23.52.33.txt Connect to server ... No image for download Connect to server ... No image for download Connect to server ... No image for download Connect to server ... No image for download Connect to server ... No image for download Connect to server ... No image for download Connect to server ... No image for download ---------------------------------------------------- 1. Make sure device with third-party recovery (eg: CWM, ADB needed) before proceeding. 2. If the current device cannot auto enter recovery mode, enter recovery mode manually. Normally enter recovery mode as follows: 1). Vol Up + Home + Power (or Vol Dn) 2). Vol Up + Power (or Vol Dn) ---------------------------------------------------- Reboot device to RECOVERY mode ... not support this operation Connect to server ... No image for download

04-13-2015, 06:08	#3 (permalink)
-Mosin- No Life Poster Join Date: May 2013 Location: Far From Home..:( Posts: 2,003 Member: 1948608 Status: Offline Thanks Meter: 1,744	Think it is connection problem, or Driver Issue ...! install PDANet And Moborobo and reboot pc And Use Good Cable.....

04-13-2015, 06:20	#4 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	i try on 2 different computers

04-14-2015, 19:22	#5 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	I545VRUFNC5 were can i get this fw?

04-14-2015, 22:11	#6 (permalink)
AsiaGSM™ Product Manager Join Date: Sep 2007 Location: Malaysia, Dubai, China. Posts: 2,391 Member: 599306 Status: Offline Sonork: 100.1578386 Thanks Meter: 5,136	you need custom recovery if you want safe user data

04-18-2015, 17:21	#12 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	i dont see custom recovery for that particular model?or this particular version I54VRUFNC5

04-18-2015, 20:34	#14 (permalink)
maniarneja Freak Poster Join Date: May 2013 Location: india Posts: 189 Member: 1942086 Status: Offline Thanks Meter: 13	Bro manualy go to recovery mode nd tick recovery unlock ur problem solved.....