G955f supported FRP file

[gridl0ck]

Trying to remove FRP from s8+ but chimera only lists following version as suported:

G955FXXU1AQL2

I cannot find this in downloads. I cannot find the version online either only combination files pop up. why does chimera not host the dfiles that it supports for FRP? this is the same for so many models.

[gcceleghg]

Originally Posted by gridl0ck

Trying to remove FRP from s8+ but chimera only lists following version as suported:

G955FXXU1AQL2

I cannot find this in downloads. I cannot find the version online either only combination files pop up. why does chimera not host the dfiles that it supports for FRP? this is the same for so many models.

Samsung Galaxy S8 +
SM-G955F

SW Change
Device Info
Firmware Compatibility
Info
MSL Unlock
Read Cert
Reboot
Root / Unroot

Paid features
Read Codes Online 59 CRD / phone
https://chimeratool.com/en/models#q=g955f

[gcceleghg]

FRP S8 plus g955f

Download the zip file
https://mega.nz/#!JgwmzQbR!LhBExG31H...L8GPbmtd0cqbO4
Decompress and open odin and pass the first file
When you turn on the phone, they activate USB debugging
They put it back in download mode
Pass the second file and voila, your s8 will be without an account

Or use this link:
https://www.youtube.com/watch?v=ZGNZftzegoU

[gcceleghg]

You should say what binary file you have on your phone but here is the latest version of the combination file for your model:
COMBINATION_FA70_G955FXXU4ARI1
https://androidfilehost.com/?fid=1322778262904029207

1. Flash Combination
The phone will start in the engineering menu and the communication will be enabled but it is not necessary to use the FRP function

2. In these cases and to ensure that you have to enable USB debugging and do manual deletion and
when you re-start the engineering menu, perform the activation of the development options again before doing flash
Ideally, you can see the OEM option unlock. But, it does not matter and continue with the process.

3. Download from the support the firmware of 4 files in each folder and only check these options:

A) BOOT - (check sboot)
B) PDA - (tick Boot, Recovery, System)
C) PHONE - DO NOT tick anything or load
D) CSC - DO NOT tick or load

The phone will start without an account, enable USB debugging and now you can see and enable OEM Unlock.
Then they do a manual deletion and the phone is re-started without an account.

[gridl0ck]

Hi my binary is:

g955fxxu1AQC9

I dont understand why Chimera does not host the very file it says it supports.

[zubairhussain]

Originally Posted by gcceleghg

You should say what binary file you have on your phone but here is the latest version of the combination file for your model:
COMBINATION_FA70_G955FXXU4ARI1
https://androidfilehost.com/?fid=1322778262904029207

1. Flash Combination
The phone will start in the engineering menu and the communication will be enabled but it is not necessary to use the FRP function

2. In these cases and to ensure that you have to enable USB debugging and do manual deletion and
when you re-start the engineering menu, perform the activation of the development options again before doing flash
Ideally, you can see the OEM option unlock. But, it does not matter and continue with the process.

3. Download from the support the firmware of 4 files in each folder and only check these options:

A) BOOT - (check sboot)
B) PDA - (tick Boot, Recovery, System)
C) PHONE - DO NOT tick anything or load
D) CSC - DO NOT tick or load

The phone will start without an account, enable USB debugging and now you can see and enable OEM Unlock.
Then they do a manual deletion and the phone is re-started without an account.

brilliant instructions bro. just done 1 g955f binary 4 following ur guide bro.

[Badrian]

super solution....just done g955f with binary 4 thanks