eMMC ORC: 00000000 F6 - GSM-Forum

didin yulian · 07-21-2014, 18:29

Erasing...
Device Ready...
Device Ready...OK!
ID check...
Level (V): VCC V18 VCCQ D0 CMD CLK
1.8 Pullup: 2.86 1.76 3.25 0.23 0.16 0.00
1.8 Low : 2.86 1.76 3.25 0.01 0.00 0.00
1.8 High : 2.86 1.78 3.25 1.17 1.20 1.34
...
2.5 Pullup: 2.86 1.76 3.25 0.28 0.27 0.00
2.5 Low : 2.86 1.76 3.25 0.01 0.00 0.00
2.5 High : 2.86 1.79 3.25 1.59 1.62 1.77
...
3.3 Pullup: 2.86 1.76 3.25 0.32 0.31 0.00
3.3 Low : 2.86 1.76 3.25 0.01 0.00 0.01
3.3 High : 2.86 1.80 3.25 1.93 1.96 2.14
...
Power On : 2.84 1.78 3.25 0.34 0.32 0.00
Set Low : 2.84 1.78 3.25 0.01 0.00 0.01
Set High: 2.84 1.78 3.25 1.91 1.93 2.11
...
Work Voltage: 2.84 1.78 3.25 1.08 1.48 0.01
---------------------------------------------------
eMMC ORC: 00000000 F6
eMMC CID: 0000000000000000,bad code!
>>Erase chip lost!

what the mean eror f6
i9300 samsung

isp
vcc ok
3.3 ok
1.8 ok
clk wa

WBGSM · 07-22-2014, 07:30

brother your pinouts is okay but tell me that u connect power supply or battery also ?

WBGSM

didin yulian · 07-22-2014, 08:15

Level (V): VCC V18 VCCQ D0 CMD CLK
Work Voltage: 2.84 1.78 3.25 1.08 1.48 0.01

i think the problem is cmd to low..

WBGSM · 07-22-2014, 09:09

Yess Good so Enjoy the World Best Tool

br
WBGSM

didin yulian · 07-22-2014, 11:38

eMMC ORC: 00000000 F6

what mean for f6 code eror

does pd support have ansewr for this..

07-21-2014, 18:29	#1 (permalink)
didin yulian No Life Poster Join Date: Mar 2006 Location: skyw0rk jombang Posts: 651 Member: 239081 Status: Offline Thanks Meter: 253	eMMC ORC: 00000000 F6 Erasing... Device Ready... Device Ready...OK! ID check... Level (V): VCC V18 VCCQ D0 CMD CLK 1.8 Pullup: 2.86 1.76 3.25 0.23 0.16 0.00 1.8 Low : 2.86 1.76 3.25 0.01 0.00 0.00 1.8 High : 2.86 1.78 3.25 1.17 1.20 1.34 ... 2.5 Pullup: 2.86 1.76 3.25 0.28 0.27 0.00 2.5 Low : 2.86 1.76 3.25 0.01 0.00 0.00 2.5 High : 2.86 1.79 3.25 1.59 1.62 1.77 ... 3.3 Pullup: 2.86 1.76 3.25 0.32 0.31 0.00 3.3 Low : 2.86 1.76 3.25 0.01 0.00 0.01 3.3 High : 2.86 1.80 3.25 1.93 1.96 2.14 ... Power On : 2.84 1.78 3.25 0.34 0.32 0.00 Set Low : 2.84 1.78 3.25 0.01 0.00 0.01 Set High: 2.84 1.78 3.25 1.91 1.93 2.11 ... Work Voltage: 2.84 1.78 3.25 1.08 1.48 0.01 --------------------------------------------------- eMMC ORC: 00000000 F6 eMMC CID: 0000000000000000,bad code! >>Erase chip lost! what the mean eror f6 i9300 samsung isp vcc ok 3.3 ok 1.8 ok clk wa

07-22-2014, 07:30	#2 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 37 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	brother your pinouts is okay but tell me that u connect power supply or battery also ? WBGSM

07-22-2014, 08:15	#3 (permalink)
didin yulian No Life Poster Join Date: Mar 2006 Location: skyw0rk jombang Posts: 651 Member: 239081 Status: Offline Thanks Meter: 253	Level (V): VCC V18 VCCQ D0 CMD CLK Work Voltage: 2.84 1.78 3.25 1.08 1.48 0.01 i think the problem is cmd to low..

07-22-2014, 09:09	#4 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 37 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	Yess Good so Enjoy the World Best Tool br WBGSM

07-22-2014, 11:38	#5 (permalink)
didin yulian No Life Poster Join Date: Mar 2006 Location: skyw0rk jombang Posts: 651 Member: 239081 Status: Offline Thanks Meter: 253	eMMC ORC: 00000000 F6 what mean for f6 code eror does pd support have ansewr for this..