GPG eMMC Box Flashing,Imei Repair,Unlock Error,Solutions&Mannuls Here - Page 2 - GSM-Forum

adnan_taeki · 02-28-2014, 00:18

Quote:

Originally Posted by SHIJILFONOTLY

WHILE USE THE GPG USB SERIAL PORT CABLE SO MANY USERS FACED THE TESTED MODE ERROR
I HAVE THIS CABLE I CHECK THE CABLE WHERE IS THE PROBLEMS
I WILL TRY TO CLEAR AND GIVE THE REPAIR DETAILS IN THIS CABLE

Do you found the problem .... ?? if you found it plz share how to repair this problem ..

Regarts.

bosarah · 03-01-2014, 20:29

This UART cable not work

Sent from my Nexus 5 using Tapatalk

SHIJILFONOTLY · 03-03-2014, 06:26

Quote:

Originally Posted by bosarah

This UART cable not work

Sent from my Nexus 5 using Tapatalk

yes some cable have problems
you can use other com based box then use it

skylee89 · 07-19-2014, 07:57

cant see the pictures...

balaji_mobile · 08-29-2014, 16:30

eMMC CID: 0000000000000000,bad code!
>>ID check lost!

please help me how to do,flash karbonn A15

logs:

Code:

  Read Info...
   Device Ready...
   Device Ready...OK!
  ID check...
  Level (V):	VCC    V18    VCCQ    D0    CMD    CLK
  1.8 Pullup:	0.00    0.00     0.00    0.33    0.35    0.02
  1.8 Low   :	0.00    0.00     0.00    0.00    0.00    0.00
  1.8 High  :	0.00    0.00     0.00    1.39    1.41    1.40
  ...
  2.5 Pullup:	0.00    0.00     0.00    0.63    0.69    0.05
  2.5 Low   :	0.00    0.00     0.00    0.00    0.00    0.00
  2.5 High  :	0.00    0.00     0.00    1.65    1.67    1.69
  ...
  3.3 Pullup:	0.00    0.00     0.00    0.83    0.80    0.11
  3.3 Low   :	0.00    0.00     0.00    0.00    0.00    0.00
  3.3 High  :	0.00    0.00     0.00    2.03    2.06    2.11
  ...
  Power On  :	3.09    1.76     2.48    0.37    0.37    0.01
  Set   Low :	3.08    1.76     2.48    0.01    0.01    0.00
  Set   High:	3.07    1.76     2.48    1.65    1.67    1.69
  ...
  Work Voltage:	3.07    1.76     2.48    0.03    1.43    0.11
  ---------------------------------------------------
  eMMC ORC: 00000000     F6
  eMMC CID: 0000000000000000,bad code!
  ID check lost!
  Read Info...
   Device Ready...
   Device Ready...OK!
  ID check...
  Level (V):	VCC    V18    VCCQ    D0    CMD    CLK
  1.8 Pullup:	0.00    0.00     0.00    0.35    0.36    0.01
  1.8 Low   :	0.00    0.00     0.00    0.00    0.00    0.00
  1.8 High  :	0.00    0.00     0.00    1.36    1.38    1.37
  ...
  2.5 Pullup:	0.00    0.00     0.00    0.64    0.69    0.05
  2.5 Low   :	0.00    0.00     0.00    0.00    0.00    0.00
  2.5 High  :	0.00    0.00     0.00    1.65    1.66    1.69
  ...
  3.3 Pullup:	0.00    0.00     0.00    0.82    0.79    0.10
  3.3 Low   :	0.00    0.00     0.00    0.01    0.00    0.00
  3.3 High  :	0.00    0.00     0.00    1.97    2.00    2.04
  ...
  Power On  :	3.09    1.76     2.48    0.49    0.49    0.00
  Set   Low :	3.09    1.76     2.48    0.01    0.00    0.01
  Set   High:	3.07    1.76     2.48    1.65    1.66    1.69
  ...
  Work Voltage:	3.08    1.76     2.48    0.03    1.40    0.09
  ---------------------------------------------------
  eMMC ORC: 00000000     A6
  eMMC CID: 0000000000000000,bad code!
>>ID check lost!

help me!

balaji_mobile · 08-30-2014, 12:53

Quote:

Originally Posted by balaji_mobile

eMMC CID: 0000000000000000,bad code!
>>ID check lost!

please help me how to do,flash karbonn A15

logs:

Code:

  Read Info...
   Device Ready...
   Device Ready...OK!
  ID check...
  Level (V):    VCC    V18    VCCQ    D0    CMD    CLK
  1.8 Pullup:    0.00    0.00     0.00    0.33    0.35    0.02
  1.8 Low   :    0.00    0.00     0.00    0.00    0.00    0.00
  1.8 High  :    0.00    0.00     0.00    1.39    1.41    1.40
  ...
  2.5 Pullup:    0.00    0.00     0.00    0.63    0.69    0.05
  2.5 Low   :    0.00    0.00     0.00    0.00    0.00    0.00
  2.5 High  :    0.00    0.00     0.00    1.65    1.67    1.69
  ...
  3.3 Pullup:    0.00    0.00     0.00    0.83    0.80    0.11
  3.3 Low   :    0.00    0.00     0.00    0.00    0.00    0.00
  3.3 High  :    0.00    0.00     0.00    2.03    2.06    2.11
  ...
  Power On  :    3.09    1.76     2.48    0.37    0.37    0.01
  Set   Low :    3.08    1.76     2.48    0.01    0.01    0.00
  Set   High:    3.07    1.76     2.48    1.65    1.67    1.69
  ...
  Work Voltage:    3.07    1.76     2.48    0.03    1.43    0.11
  ---------------------------------------------------
  eMMC ORC: 00000000     F6
  eMMC CID: 0000000000000000,bad code!
  ID check lost!
  Read Info...
   Device Ready...
   Device Ready...OK!
  ID check...
  Level (V):    VCC    V18    VCCQ    D0    CMD    CLK
  1.8 Pullup:    0.00    0.00     0.00    0.35    0.36    0.01
  1.8 Low   :    0.00    0.00     0.00    0.00    0.00    0.00
  1.8 High  :    0.00    0.00     0.00    1.36    1.38    1.37
  ...
  2.5 Pullup:    0.00    0.00     0.00    0.64    0.69    0.05
  2.5 Low   :    0.00    0.00     0.00    0.00    0.00    0.00
  2.5 High  :    0.00    0.00     0.00    1.65    1.66    1.69
  ...
  3.3 Pullup:    0.00    0.00     0.00    0.82    0.79    0.10
  3.3 Low   :    0.00    0.00     0.00    0.01    0.00    0.00
  3.3 High  :    0.00    0.00     0.00    1.97    2.00    2.04
  ...
  Power On  :    3.09    1.76     2.48    0.49    0.49    0.00
  Set   Low :    3.09    1.76     2.48    0.01    0.00    0.01
  Set   High:    3.07    1.76     2.48    1.65    1.66    1.69
  ...
  Work Voltage:    3.08    1.76     2.48    0.03    1.40    0.09
  ---------------------------------------------------
  eMMC ORC: 00000000     A6
  eMMC CID: 0000000000000000,bad code!
>>ID check lost!

help me!

my problem solved

check here:

http://forum.gsmhosting.com/vbb/10526831-post104.html

tommy_sanada · 01-08-2015, 11:09

i have n7100 imei repair failed,, what is problem sir ?

Waiting to enter unlock IMEI Repair mode¡*
Enter unlock IMEI Repair mode successful.
Phone Name:GT-N7000
Phone version:N7000DXLSE
Old IMEI:corrupted!!
WIFI ID number:50CCF8B1FCEB
Serial number:8?¼µ*õb¤âšõÏ
Fail to set original serial number!
Fail to run Unlock IMEI Repair!

thank's

unwana1x · 01-12-2015, 13:15

Please how can the connection be made, is it plugging the ftdi cable to the box or to the computer directly.

wijaya811 · 08-30-2015, 17:26

gpg emmc jtag p3100 eror need solution..

Connecting...
SN:0000010.....
Get License data...
Verify Liecnse data...
Version:V3.2
Device Ready...OK!
------------------------------------------------------
Writing in progress(make sure to press Power On key)...
CPU ID: 4C0932BD.
Don't support this CPU, or connection error please check connection
>>Time: 1 s

**Dipendra Pathak** · 09-01-2015, 03:10

Quote:

Originally Posted by tommy_sanada

i have n7100 imei repair failed,, what is problem sir ?

Waiting to enter unlock IMEI Repair mode¡*
Enter unlock IMEI Repair mode successful.
Phone Name:GT-N7000
Phone version:N7000DXLSE
Old IMEI:corrupted!!
WIFI ID number:50CCF8B1FCEB
Serial number:8?¼µ*õb¤âšõÏ
Fail to set original serial number!
Fail to run Unlock IMEI Repair!

thank's

Seems your original IMEI corrupted.

You have to go Android Tab then, Repair Tab

Now choose IMEI, Com port that mobile is using current time and hit "Unlock IMEI Repair" and wait a while. Done.

Quote:

Originally Posted by unwana1x

Please how can the connection be made, is it plugging the ftdi cable to the box or to the computer directly.

Yes you can connect fidi cable directly to computer. It makes COM Port.

Note: You need to install fidi cable driver so that it works.

Quote:

Originally Posted by wijaya811

gpg emmc jtag p3100 eror need solution..

Connecting...
SN:0000010.....
Get License data...
Verify Liecnse data...
Version:V3.2
Device Ready...OK!
------------------------------------------------------
Writing in progress(make sure to press Power On key)...
CPU ID: 4C0932BD.
Don't support this CPU, or connection error please check connection
>>Time: 1 s

Hi, this is connection error. Check the soldered wires etc.

BR
Dipendra Pathak

03-01-2014, 20:29	#17 (permalink)
bosarah Junior Member Join Date: Feb 2014 Posts: 9 Member: 2125597 Status: Offline Thanks Meter: 2	This UART cable not work Sent from my Nexus 5 using Tapatalk

07-19-2014, 07:57	#19 (permalink)
skylee89 Junior Member Join Date: Apr 2008 Posts: 28 Member: 758137 Status: Offline Thanks Meter: 0	cant see the pictures...

01-08-2015, 11:09	#22 (permalink)
tommy_sanada Junior Member Join Date: Nov 2014 Posts: 2 Member: 2289871 Status: Offline Thanks Meter: 0	i have n7100 imei repair failed,, what is problem sir ? Waiting to enter unlock IMEI Repair mode¡* Enter unlock IMEI Repair mode successful. Phone Name:GT-N7000 Phone version:N7000DXLSE Old IMEI:corrupted!! WIFI ID number:50CCF8B1FCEB Serial number:8?¼µ*õb¤âšõÏ Fail to set original serial number! Fail to run Unlock IMEI Repair! thank's

01-12-2015, 13:15	#23 (permalink)
unwana1x Junior Member Join Date: Jan 2015 Location: Uyo, Nigeria Posts: 12 Member: 2326240 Status: Offline Thanks Meter: 0	Please how can the connection be made, is it plugging the ftdi cable to the box or to the computer directly.

08-30-2015, 17:26	#24 (permalink)
wijaya811 Junior Member Join Date: Jul 2014 Posts: 22 Member: 2228536 Status: Offline Sonork: wijaya Thanks Meter: 1	gpg emmc jtag p3100 eror need solution.. Connecting... SN:0000010..... Get License data... Verify Liecnse data... Version:V3.2 Device Ready...OK! ------------------------------------------------------ Writing in progress(make sure to press Power On key)... CPU ID: 4C0932BD. Don't support this CPU, or connection error please check connection >>Time: 1 s