GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > GPGeMMC

Closed Thread
 
LinkBack Thread Tools Display Modes
Old 07-08-2014, 15:20   #1 (permalink)
Product Manager
 
Dipendra Pathak's Avatar
 
Join Date: Apr 2008
Location: Whitehole throught Blackhole!
Posts: 9,582
Member: 747989
Status: Offline
Sonork: 100.1593052
Thanks Meter: 8,620
GPG EMMC Chinese Andorid (MTK, SPD), Original Android Tool Detail Manual ;)


GPG EMMC Box and Android Tab
As the title suggests “Android”, we only discuss regarding the android functions that we can see in the different functional below under main Android Tab.






image ru





Let’s start from USB Operations i.e. Read Info, Read File, Write File, Read Nvram, Write NVram:




Here we find 5 sub-topics as seen in the screen shorts of above. They are:


1. USB Mode
2. ADB Mode
3. Tablet
4. Fast Boot
5. Tool

 
The Following 2 Users Say Thank You to Dipendra Pathak For This Useful Post:
Old 07-08-2014, 15:30   #2 (permalink)
Product Manager
 
Dipendra Pathak's Avatar
 
Join Date: Apr 2008
Location: Whitehole throught Blackhole!
Posts: 9,582
Member: 747989
Status: Offline
Sonork: 100.1593052
Thanks Meter: 8,620
How to take info of Android Devices (with USB Cable + Battery)?

You can find the android device info using the following manual:

1. Open the Volcano software

2. Click on “Android” Tab

3. Click one “USB Mode” Sub-Tab

4. Tick on “Read Info”

5. Choose the CPU type “MTK or SPD6820” from drop-down menu

6. Be sure to tick on “USB Mode”

7. Click on “Start”

8. Power off the Device

9. Take Out the Battery from the Device.

10. Insert the Battery to the Device again.

11. Press “Boot Key” if necessary (Boot Key might be Vol- / Vol+ / Vol- and Home, Vol- and Home etc.)

12. Hold and press Boot Key and insert the USB cable to the Device.

13. Wait until the driver installed.

14. Wait until you see the saving Screen short as shown below:


how to take a screenshot on a pc

15. Done.
 
Old 07-08-2014, 15:39   #3 (permalink)
Product Manager
 
Dipendra Pathak's Avatar
 
Join Date: Apr 2008
Location: Whitehole throught Blackhole!
Posts: 9,582
Member: 747989
Status: Offline
Sonork: 100.1593052
Thanks Meter: 8,620
GPG EMMC Box and “USB Mode” Tab





Of course USB mode works for USB operation. So you need USB Cable and Battery for this operation.





image sharing





Let’s start from USB Operations i.e. Read Info, Read File, Write File, Read Nvram, Write NVram:

 
Old 07-08-2014, 15:46   #4 (permalink)
Product Manager
 
Dipendra Pathak's Avatar
 
Join Date: Apr 2008
Location: Whitehole throught Blackhole!
Posts: 9,582
Member: 747989
Status: Offline
Sonork: 100.1593052
Thanks Meter: 8,620
How do I confirm that Formatting SPD the Device is safe using GPG EMMC BOX (Box won’t kill the SPD Devices)?




Take the info of android Devices. If you see “Analysis flash internal data successfully.” In the GPG EMMC log or Screen short, then, you can format the device without any problem and GPG EMMC box won’t kill your Android Devices. Check the log :


Quote:

1. Boot downloaded.2. CPU TYPE:SC8810/6820 [88100040]3. Flash ID: 002C00BC905556004. Flash Type:[Micron] MT29C4G48MAZAPAKD5. FLASH LEN:0x200000006. mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),4m(modem),3840k(fixnv),3840k(backupfixnv),512 0k(dsp),3840k(runtimenv),10m(boot),10m(recovery),2 30m(system),156m(userdata),60m(cache),256k(misc),1 m(boot_logo),1m(fastboot_logo),3840k(productinfo), 512k(kpanic),512k(simlock),10m(intmemory)7. Analysis flash internal data successfully.

After you see, “Analysis flash internal data successfully”, you can format the device from the GPG EMMC Android Main Interface or from this “USB MODE” Tab.
 
The Following User Says Thank You to Dipendra Pathak For This Useful Post:
Old 07-08-2014, 15:59   #5 (permalink)
Product Manager
 
Dipendra Pathak's Avatar
 
Join Date: Apr 2008
Location: Whitehole throught Blackhole!
Posts: 9,582
Member: 747989
Status: Offline
Sonork: 100.1593052
Thanks Meter: 8,620


How to read Flash File of Android Devices (with USB Cable + Battery)?




You can read the android device’s Flash File using the following manual:


1. Open the GPG EMMC software
2. Click on “Android” Tab
3. Click one “USB Mode” Sub-Tab
4. Tick on “Read File”
5. Choose the CPU Type “MTK or SPD6820” from Drop-Down menu.
6. Be sure to tick on “USB Mode”
7. Click on “Start”
8. Power off the Device
9. Take Out the Battery from the Device.
10. Insert the Battery to the Device again.
11. Press “Boot Key” if necessary (Boot Key might be Vol- / Vol+ / Vol- and Home, Vol- and Home etc.)
12. Hold and press Boot Key and insert the USB cable to the Device.
13. Wait until the driver installed.
14. Wait until you see the File Saving Screen Short as shown below:




15. Now, Choose the location that you want to save file and give the file name as shown below and click on “Save” button.


(Information taken from Samsung Clone X5292 Quad Core Processor)



16. Done.










Last edited by Dipendra Pathak; 07-08-2014 at 16:23.
 
The Following 2 Users Say Thank You to Dipendra Pathak For This Useful Post:
Old 07-08-2014, 16:08   #6 (permalink)
Product Manager
 
Dipendra Pathak's Avatar
 
Join Date: Apr 2008
Location: Whitehole throught Blackhole!
Posts: 9,582
Member: 747989
Status: Offline
Sonork: 100.1593052
Thanks Meter: 8,620

How to Auto Format Android Devices (with USB Cable + Battery)?



You can do the Auto format of the device using following manual:


1. Open the GPG EMMC software
2. Click on “Android” Tab
3. Click one “USB Mode” Sub-Tab
4. Tick on “Format” and choose “Auto” Format from Drop Down list.



Note:
In “Auto Format” you don’t need to describe Format Address and length of the device Flash File But, in custom format, you must describe the format address and length information from the “Read Info” at the time of format. Also, you can find the safe format information of SPD Android from the “Read info” button. If you see – “Analysis flash internal data successfully.”, then, you can format the device with your closed eyes


5. Choose the CPU Type “MTK or SPD6820” from drop-down list.
6. Be sure to tick on “USB Mode”
7. Click on “Start”
8. Power off the Device
9. Take Out the Battery from the Device.
10. Insert the Battery to the Device again.
11. Press “Boot Key” if necessary (Boot Key might be Vol- / Vol+ / Vol- and Home, Vol- and Home etc.)
12. Hold and press Boot Key and insert the USB cable to the Device.
13. Let the device install the driver itself.
14. Wait until you see the information “File Erasing Complete”





free upload image



15. Done.




 
The Following 2 Users Say Thank You to Dipendra Pathak For This Useful Post:
Old 07-08-2014, 16:19   #7 (permalink)
Product Manager
 
Dipendra Pathak's Avatar
 
Join Date: Apr 2008
Location: Whitehole throught Blackhole!
Posts: 9,582
Member: 747989
Status: Offline
Sonork: 100.1593052
Thanks Meter: 8,620
How to Custom Format Android Devices (with USB Cable + Battery)?


When device not supports Auto Format due to various reasons, you can use custom format address to restore the original format of the device.
You have to do two operations to do custom format:


A.) Read info of the device

B.) Custom Format



A.) Read info of the device

To do custom format you must know the format address of the device so that you can use that address in the later.

1. Open the GPG EMMC software
2. Click on “Android” Tab
3. Click one “USB Mode” Sub-Tab
4. Tick on “Read Info”
5. Choose the CPU type “MTK or SPD6820” from drop-down menu
6. Be sure to tick on “USB Mode”
7. Click on “Start”
8. Power off the Device
9. Take Out the Battery from the Device.
10. Insert the Battery to the Device again.
11. Press “Boot Key” if necessary (Boot Key might be Vol- / Vol+ / Vol- and Home, Vol- and Home etc.)
12. Hold and press Boot Key and insert the USB cable to the Device.
13. Wait until the driver installed.
14. Wait until you see the saving Screen short as shown below:


gifs upload

15. Done

B.) Custom Format

You have to follow following manual to do custom format.

1. Open the GPG EMMC software
2. Click on “Android” Tab
3. Click one “USB Mode” Sub-Tab
4. Tick on “Format” and choose “Manual” Format from Drop Down list.
5. Fill the Format address on the “Start:” and “Len:” box that you have just got from “Read Info” as above picture.


Note:

You can describe the format address and length information from the “Read Info” button. Also, you can find the safe format information of SPD Android from the “Read info” button. If you see – “Analysis flash internal data successfully.”, then, you can format the device with closed eyes


6. Choose the CPU Type “MTK or SPD6820” from drop-down list.
7. Be sure to tick on “USB Mode”
8. Click on “Start”
9. Power off the Device
10. Take Out the Battery from the Device.
11. Insert the Battery to the Device again.
12. Press “Boot Key” if necessary (Boot Key might be Vol- / Vol+ / Vol- and Home, Vol- and Home etc.)
13. Hold and press Boot Key and insert the USB cable to the Device.
14. Let the device install the driver itself.
15. Wait until you see the information “File Erasing Complete”



capture screen

16. Done.
 
The Following 4 Users Say Thank You to Dipendra Pathak For This Useful Post:
Show/Hide list of the thanked
Old 07-09-2014, 15:19   #8 (permalink)
Product Manager
 
Dipendra Pathak's Avatar
 
Join Date: Apr 2008
Location: Whitehole throught Blackhole!
Posts: 9,582
Member: 747989
Status: Offline
Sonork: 100.1593052
Thanks Meter: 8,620
How to Flash Android Devices MTK, SPD etc.

How to write Flash File of Android Devices (with USB Cable + Battery)?


As we know, there are two types of android devices 1. MTK Android and 2 SPD Android.

MTK android needs –> “Scatter file” writing and SPD ANDROID needs –> “PAC file” writing.



Flashing MTK Android (Scatter files)


1. Open the GPG EMMC software
2. Click on "Android" Tab
3. Choose "USB" tab here
4. Choose "MTK" in case of MTK Device from below
5. Choose "Write FAC File"
6. Click on "Start"



image hosting 10mb limit


7. Now, Other Box opens here
8. Click on "Scatter Loading"



image hosting 10mb limit


9. Choose "MT****_Android Scatter" Text file and Click on “OK"
10. Now, you will see ">>Analysis of USB Port, Please insert Phone USB Cable." on the volcano Screen.
11. Press Boot Key of Switch Off mobile.......and Insert USB Cable



print screen windows


12. Wait Until the Flash Fire Completely Written.
13. Done.
 
The Following 3 Users Say Thank You to Dipendra Pathak For This Useful Post:
Show/Hide list of the thanked
Old 07-10-2014, 10:56   #9 (permalink)
Product Manager
 
Dipendra Pathak's Avatar
 
Join Date: Apr 2008
Location: Whitehole throught Blackhole!
Posts: 9,582
Member: 747989
Status: Offline
Sonork: 100.1593052
Thanks Meter: 8,620
Flashing SPD Android (PAC file)


We say “FAC file” to the “PAC file” in the GPG EMMC Box. You can write SPD PAC file following ways:



1. Open the GPG EMMC software

2. Click on "Android" Tab



free upload


3. Choose "USB" tab here
4. Choose "MTK" in case of MTK Device from below
5. Choose "Write FAC File"
6. Click on "Start"
7. Now, Other Box opens here
8. Click on "Open"
9. Choose "PAC extension file" Click on “OK"



free upload pictures



10. Now, you will see ">>Analysis of USB Port, Please insert Phone USB Cable." on the volcano Screen.
11. Press Boot Key of Switch Off mobile.......and Insert USB Cable
12. Wait Until the Flash Fire Completely Written.



image hosting *****


13. Done.
 
The Following 4 Users Say Thank You to Dipendra Pathak For This Useful Post:
Show/Hide list of the thanked
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 13:11.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.28828 seconds with 8 queries

SEO by vBSEO