reading out user data from i9300 EMMC - GSM-Forum

Mobajer · 11-29-2014, 00:26

Hello, i have soldered i9300 EMMC directly to adapter, here is the photo o correct pins and chip name, and the log. any advices how to get data out?

Connecting...
SN:00000102****
Get License data...
Verify Liecnse data...
Version:V3.1
Device Ready...OK!
------------------------------------------------------
Read Info...
Pin Check up...
Pin Check up...OK!
Device Ready...
Device Ready...OK!
ID check...
ID check: 00010015
Product name: 000000
User partition size: 400000000 ( 16384M / 16.000G), 17179869184 Bytes
Boot partition size: 0x80000 ( 0.5M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
ID check success. time:0.87 sec.
Reading...
Pin Check up...
Pin Check up...OK!
Device Ready...
Device Ready...OK!
ID check...
ID check: 00010015
Product name: 000000
User partition size: 400000000 ( 16384M / 16.000G), 17179869184 Bytes
Boot partition size: 0x80000 ( 0.5M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Read chip...Boot1
Read chip: 29.09 sec.
Verify chip...Boot1
Verify chip: 28.80 sec.
Read chip...Boot2
Read chip: 29.03 sec.
Verify chip...Boot2
Verify chip: 28.88 sec.
Read chip...User
Read chip: 10.28 sec.
>>Read chip lost!

Mobajer · 11-29-2014, 00:48

here is photo of the adaptor

**Dipendra Pathak** · 11-29-2014, 05:45

Brother, this is not gpg emmc power adapter, We have other adapter added and this is free of cost. Ask it with your reseller

How GPG EMMC Power Adapter works?

Just check the link you will see the GPG EMMC Power Adapter Video tutorial:

http://forum.gsmhosting.com/vbb/10289164-post1.html

Box Version and EMMC Adapter

GPG EMMC has two version of box. The previous box has not inbuilt GPG EMMC Power Adapter and 2nd version box has inbuilt version of the EMMC Power Adapter. For more:

http://forum.gsmhosting.com/vbb/f899...w-old-1882054/

How to write Full Dump of i9300 with GPG EMMC box?

Follow the link to find the answer:
https://www.youtube.com/watch?v=lfS7nQOCw-U

Good Luck!!!

BR

Dipendra Pathak

Mobajer · 11-29-2014, 07:50

I have this new power adaptor and got various error while trying to read user data throw ISP.

When removed EMMC chip from pcb saw some bad joined bga pins, picture attached.

Wanted to ask if is possible directly read EMMC chip with any adaptor ? And why this one is included (photo showed before) in box content if its not for this box or not working?

Mobajer · 11-29-2014, 07:51

Quote:

Originally Posted by Mobajer

I have this new power adaptor and got various error while trying to read user data throw ISP.

When removed EMMC chip from pcb saw some bad joined bga pins, picture attached.

Wanted to ask if is possible directly read EMMC chip with any adaptor ? And why this one is included (photo showed before) in box content if its not for this box or not working?

now bga chip look like new, all cold joined pins are restored.

Mobajer · 11-29-2014, 09:35

I have soldered EMMC on phone logic board and with ISP with new power adapter have connected, and user data was reading only 8 seconds, here is the log:

Connecting...
SN:0000010****
Get License data...
Verify Liecnse data...
Version:V3.1
Device Ready...OK!
------------------------------------------------------
Read Info...
Device Ready...
Device Ready...OK!
ID check...
Level (V): VCC V18 VCCQ D0 CMD CLK
3.3 Pullup: 0.01 0.02 0.00 0.80 0.80 0.00
Power On : 2.83 1.77 2.48 0.67 0.77 0.01
Set Low : 2.83 1.78 2.48 0.00 0.02 0.00
Set High: 2.83 1.77 2.48 2.00 2.02 2.02
...
Work Voltage: 2.83 1.78 2.48 0.96 1.72 0.00
---------------------------------------------------
eMMC ORC: C0FF8080 AF
eMMC CID: 150100303030303030562011072658
eMMC CSD: 7F204E02641EB207FFEDB7FFDF1480
ID check: 00010015
Product name: 000000
User partition size: 400000000 ( 16384M / 16.000G), 17179869184 Bytes
Boot partition size: 0x80000 ( 0.5M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
ID check success. time:0.77 sec.
Reading...
Device Ready...
Device Ready...OK!

tried to read again, get error: "read chip lost", here is log:

ID check...
Level (V): VCC V18 VCCQ D0 CMD CLK
3.3 Pullup: 0.00 0.00 0.00 0.72 0.80 0.00
Power On : 2.83 1.77 2.48 0.66 0.76 0.00
Set Low : 2.83 1.77 2.48 0.02 0.02 0.01
Set High: 2.83 1.78 2.48 2.00 2.02 2.02
...
Work Voltage: 2.83 1.78 2.48 1.04 1.72 0.00
---------------------------------------------------
eMMC ORC: C0FF8080 AF
eMMC CID: 150100303030303030562011072658
eMMC CSD: 902701320F5903FFF6DBFFEF8A4040
ID check: 00010015
Product name: 000000
User partition size: 400000000 ( 16384M / 16.000G), 17179869184 Bytes
Boot partition size: 0x80000 ( 0.5M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Read chip...Boot1
Read chip: 28.80 sec.
Verify chip...Boot1
Verify chip: 28.80 sec.
Read chip...Boot2
Read chip: 28.80 sec.
Verify chip...Boot2
Verify chip: 28.80 sec.
Read chip...User
Read chip: 10.11 sec.
Verify chip...User
Verify chip: 2.92 sec.
Read chip success. time:136.36 sec.
File saved inC:\bin 9300.bin
Reading...
Device Ready...
Device Ready...OK!
ID check...
Level (V): VCC V18 VCCQ D0 CMD CLK
3.3 Pullup: 0.00 0.00 0.00 1.58 1.29 0.00
Power On : 2.83 1.78 2.48 0.04 0.75 0.01
Set Low : 2.83 1.77 2.48 1.26 0.02 0.01
Set High: 2.83 1.78 2.48 1.87 1.97 1.97
...
Work Voltage: 2.83 1.78 2.48 1.00 1.73 0.00
---------------------------------------------------
eMMC ORC: C0FF8080 AF
eMMC CID: 150100303030303030562011072658
eMMC CSD: 902701320F5903FFF6DBFFEF8A4040
ID check: 00010015
Product name: 000000
User partition size: 400000000 ( 16384M / 16.000G), 17179869184 Bytes
Boot partition size: 0x80000 ( 0.5M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Read chip...User
Read chip: 7.22 sec.
>>Read chip lost!

i think unstable connection, because one time ok, next time error. is it possible to repair boot1 and boot2 and start the phone normally? where to download these files? (cant find on support)

Mobajer · 12-02-2014, 04:15

please reply, is it anyway to get user data out? How to repair boot 1 and boot 2?

trungdv2014 · 12-09-2014, 15:41

I face same problem. Sometime read infomation ok, sometime not. I try solder to bga emmc pad, everytime connection is good. I think errors happen only when solder direction to emmc by wires. Plz supporter help to solve this.

**Dipendra Pathak** · 12-11-2014, 05:13

please use short wires with GPG EMMC power adapter and also check there is no short circuit between wires connected for EMMC and pinout connected correctly.

Do not forget to post screen short (not logs).

BR
Dipendra Pathak

11-29-2014, 05:45	#3 (permalink)
Dipendra Pathak Product Manager Join Date: Apr 2008 Location: Whitehole throught Blackhole! Posts: 9,582 Member: 747989 Status: Offline Sonork: 100.1593052 Thanks Meter: 8,621	Brother, this is not gpg emmc power adapter, We have other adapter added and this is free of cost. Ask it with your reseller How GPG EMMC Power Adapter works? Just check the link you will see the GPG EMMC Power Adapter Video tutorial: http://forum.gsmhosting.com/vbb/10289164-post1.html Box Version and EMMC Adapter GPG EMMC has two version of box. The previous box has not inbuilt GPG EMMC Power Adapter and 2nd version box has inbuilt version of the EMMC Power Adapter. For more: http://forum.gsmhosting.com/vbb/f899...w-old-1882054/ How to write Full Dump of i9300 with GPG EMMC box? Follow the link to find the answer: https://www.youtube.com/watch?v=lfS7nQOCw-U Good Luck!!! BR Dipendra Pathak

11-29-2014, 09:35	#6 (permalink)
Mobajer Freak Poster Join Date: Apr 2006 Posts: 161 Member: 254719 Status: Offline Thanks Meter: 12	I have soldered EMMC on phone logic board and with ISP with new power adapter have connected, and user data was reading only 8 seconds, here is the log: Connecting... SN:0000010**** Get License data... Verify Liecnse data... Version:V3.1 Device Ready...OK! ------------------------------------------------------ Read Info... Device Ready... Device Ready...OK! ID check... Level (V): VCC V18 VCCQ D0 CMD CLK 3.3 Pullup: 0.01 0.02 0.00 0.80 0.80 0.00 Power On : 2.83 1.77 2.48 0.67 0.77 0.01 Set Low : 2.83 1.78 2.48 0.00 0.02 0.00 Set High: 2.83 1.77 2.48 2.00 2.02 2.02 ... Work Voltage: 2.83 1.78 2.48 0.96 1.72 0.00 --------------------------------------------------- eMMC ORC: C0FF8080 AF eMMC CID: 150100303030303030562011072658 eMMC CSD: 7F204E02641EB207FFEDB7FFDF1480 ID check: 00010015 Product name: 000000 User partition size: 400000000 ( 16384M / 16.000G), 17179869184 Bytes Boot partition size: 0x80000 ( 0.5M ) RPMB partition size: 0x20000 ( 0.1M ) ID check...OK! ID check success. time:0.77 sec. Reading... Device Ready... Device Ready...OK! tried to read again, get error: "read chip lost", here is log: ID check... Level (V): VCC V18 VCCQ D0 CMD CLK 3.3 Pullup: 0.00 0.00 0.00 0.72 0.80 0.00 Power On : 2.83 1.77 2.48 0.66 0.76 0.00 Set Low : 2.83 1.77 2.48 0.02 0.02 0.01 Set High: 2.83 1.78 2.48 2.00 2.02 2.02 ... Work Voltage: 2.83 1.78 2.48 1.04 1.72 0.00 --------------------------------------------------- eMMC ORC: C0FF8080 AF eMMC CID: 150100303030303030562011072658 eMMC CSD: 902701320F5903FFF6DBFFEF8A4040 ID check: 00010015 Product name: 000000 User partition size: 400000000 ( 16384M / 16.000G), 17179869184 Bytes Boot partition size: 0x80000 ( 0.5M ) RPMB partition size: 0x20000 ( 0.1M ) ID check...OK! Read chip...Boot1 Read chip: 28.80 sec. Verify chip...Boot1 Verify chip: 28.80 sec. Read chip...Boot2 Read chip: 28.80 sec. Verify chip...Boot2 Verify chip: 28.80 sec. Read chip...User Read chip: 10.11 sec. Verify chip...User Verify chip: 2.92 sec. Read chip success. time:136.36 sec. File saved inC:\bin 9300.bin Reading... Device Ready... Device Ready...OK! ID check... Level (V): VCC V18 VCCQ D0 CMD CLK 3.3 Pullup: 0.00 0.00 0.00 1.58 1.29 0.00 Power On : 2.83 1.78 2.48 0.04 0.75 0.01 Set Low : 2.83 1.77 2.48 1.26 0.02 0.01 Set High: 2.83 1.78 2.48 1.87 1.97 1.97 ... Work Voltage: 2.83 1.78 2.48 1.00 1.73 0.00 --------------------------------------------------- eMMC ORC: C0FF8080 AF eMMC CID: 150100303030303030562011072658 eMMC CSD: 902701320F5903FFF6DBFFEF8A4040 ID check: 00010015 Product name: 000000 User partition size: 400000000 ( 16384M / 16.000G), 17179869184 Bytes Boot partition size: 0x80000 ( 0.5M ) RPMB partition size: 0x20000 ( 0.1M ) ID check...OK! Read chip...User Read chip: 7.22 sec. >>Read chip lost! i think unstable connection, because one time ok, next time error. is it possible to repair boot1 and boot2 and start the phone normally? where to download these files? (cant find on support)

12-02-2014, 04:15	#7 (permalink)
Mobajer Freak Poster Join Date: Apr 2006 Posts: 161 Member: 254719 Status: Offline Thanks Meter: 12	please reply, is it anyway to get user data out? How to repair boot 1 and boot 2?

12-09-2014, 15:41	#8 (permalink)
trungdv2014 Junior Member Join Date: Oct 2014 Posts: 2 Member: 2267806 Status: Offline Thanks Meter: 0	I face same problem. Sometime read infomation ok, sometime not. I try solder to bga emmc pad, everytime connection is good. I think errors happen only when solder direction to emmc by wires. Plz supporter help to solve this.

12-11-2014, 05:13	#9 (permalink)
Dipendra Pathak Product Manager Join Date: Apr 2008 Location: Whitehole throught Blackhole! Posts: 9,582 Member: 747989 Status: Offline Sonork: 100.1593052 Thanks Meter: 8,621	please use short wires with GPG EMMC power adapter and also check there is no short circuit between wires connected for EMMC and pinout connected correctly. Do not forget to post screen short (not logs). BR Dipendra Pathak