Mt6583 - GSM-Forum

CHAUDHRAY ARSHAD · 08-23-2014, 08:31

i hve MT6583 thl w200 stuck on log but i cant format did hard reset it stuck
when u add full support add screen lock remove all mtk phone supported

CHAUDHRAY ARSHAD · 08-23-2014, 08:41

Smart-Clip 2 1.04.00 MTK: Format FFS
MTK USB Port (COM35), Provider: MediaTek Inc., Driver ver.: 2.0.0.1, Date: 1/5/2012, USB\VID_0E8D&PID_0003&REV_0100
Baud rate: autodetect
Cancelled
--- 2014-08-23 09:14:03 ---
Smart-Clip 2 1.04.00 MTK: Format FFS
Plug the USB cable into the powered off phone...
MTK USB Port (COM35), Provider: MediaTek Inc., Driver ver.: 2.0.0.1, Date: 1/5/2012, USB\VID_0E8D&PID_0003&REV_0100
Baseband Processor:MT0000, HW Rev. 0.00, SW Rev. 0.00
The phone is NOT connected properly. Read the manual at the official site for details.

mcandre · 08-26-2014, 08:25

You should service this phone via adb port (read about Yoda method)

CONCORDIA GSM · 08-26-2014, 08:36

Quote:

Originally Posted by mcandre

You should service this phone via adb port (read about Yoda method)

yeah yoda methods is rocking atm for mtk.

CHAUDHRAY ARSHAD · 08-26-2014, 10:54

Quote:

Originally Posted by mcandre

You should service this phone via adb port (read about Yoda method)

this phone is stuck on log tht y i ask u can use like dragon box do

GSM_Support · 08-26-2014, 11:06

@ CHAUDHRAY ARSHAD,

In most cases Master Reset operation suppose to solve such kind of issue.
In case after Master Reset same issue appears, try reflashing phone.

Best Regards
GSMServer team

08-23-2014, 08:31	#1 (permalink)
CHAUDHRAY ARSHAD No Life Poster Join Date: Aug 2006 Location: gsmchaudhrayarshad Age: 43 Posts: 6,996 Member: 328688 Status: Offline Thanks Meter: 2,282	Mt6583 i hve MT6583 thl w200 stuck on log but i cant format did hard reset it stuck when u add full support add screen lock remove all mtk phone supported

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-23-2014, 08:41	#2 (permalink)
CHAUDHRAY ARSHAD No Life Poster Join Date: Aug 2006 Location: gsmchaudhrayarshad Age: 43 Posts: 6,996 Member: 328688 Status: Offline Thanks Meter: 2,282	Smart-Clip 2 1.04.00 MTK: Format FFS MTK USB Port (COM35), Provider: MediaTek Inc., Driver ver.: 2.0.0.1, Date: 1/5/2012, USB\VID_0E8D&PID_0003&REV_0100 Baud rate: autodetect Cancelled --- 2014-08-23 09:14:03 --- Smart-Clip 2 1.04.00 MTK: Format FFS Plug the USB cable into the powered off phone... MTK USB Port (COM35), Provider: MediaTek Inc., Driver ver.: 2.0.0.1, Date: 1/5/2012, USB\VID_0E8D&PID_0003&REV_0100 Baseband Processor:MT0000, HW Rev. 0.00, SW Rev. 0.00 The phone is NOT connected properly. Read the manual at the official site for details.

08-26-2014, 08:25	#3 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	You should service this phone via adb port (read about Yoda method)

08-26-2014, 11:06	#6 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ CHAUDHRAY ARSHAD, In most cases Master Reset operation suppose to solve such kind of issue. In case after Master Reset same issue appears, try reflashing phone. Best Regards GSMServer team