SM-G530T/T1 Write IMEI Cert UART successful - GSM-Forum

Stunman112 · 07-09-2018, 19:05

Phones original IMEI was under blacklist and could not be used on any networks in USA. Solved issue with a new cert backup and .QCN from similar phone.
Thanks GCPro did it..* (See conclusion)

ROOT is needed with SU installed and SELinux Permissive

I used "TrapKernal_G530T_A0F8_Root.tar" (KnoX will be VoiD anyway)

https://androidfilehost.com/?fid=24052804347817375

LOGs:

Selected Model SM-G530T
Selected Task SAM Readinfo ADB

Searching ADB Devices...
Device Detected...
SELinux := Permissive
model:= SM-G530T1
Androids Version:= 5.1.1
Description Version:= gprimeltemtr-user 5.1.1 LMY47X G530T1UVU1AOH9 release-keys
Platform:= msm8916 [ qcom ] [ MSM8916 ]
Baseband:= G530T1UVU1AOH9
VER:= G530T1UVU1AOH9/G530T1TMB1AOH9/G530T1UVU1AOH9/G530T1UVU1AOH9
Carrier := TMB_USA
EFS CSC := TMB
Knox Warranty := Void
AP UART Status := Enable Already.
Network Mode := 0
Simstatus:= ABSENT
BusyBox version := 1.23.2
ANDROID-ID = 38f2c88a_0000A7EBDA
SU Version..2.50:SUPERSU
Device is Secure Rooted..uid=0
System Permission is Read/Write...

Enable DIAG mode..

Then do NewQC Unlock..

Using Version...1.0.0.0058
Selected Port SAMSUNG Mobile USB Serial Port COM5
Selected Model SM-G530T1
Selected Task SAMSUNG NEW-QC UNLOCK

Searching phone...

Build...MPSS.DPM.2.0.c5-00106-M8936FAAAANUZM-1
Device Detected...
SELinux := Permissive
model:= SM-G530T1
Androids Version:= 5.1.1
Description Version:= gprimeltemtr-user 5.1.1 LMY47X G530T1UVU1AOH9 release-keys
Platform:= msm8916 [ qcom ] [ MSM8916 ]
Baseband:= G530T1UVU1AOH9
VER:= G530T1UVU1AOH9/G530T1TMB1AOH9/G530T1UVU1AOH9/G530T1UVU1AOH9
Carrier := TMB_USA
EFS CSC := TMB
Knox Warranty := Void
AP UART Status := Enable Already.
Network Mode := 0
Simstatus:= ABSENT
BusyBox version := 1.23.2
ANDROID-ID = 38f2c88a_00006EC602
SU Version..2.50:SUPERSU
Device is Secure Rooted..uid=0
System Permission is Read/Write...

SAMSUNG NEW-QC UNLOCK Started..
Direct Unlock Success...

Now setup phone to use UART box cable and start

Selected Port USB Serial Port COM2
Selected Model SM-G530T1
Selected Task SAM CERT WRITE

ALL SAMSUNG CERT WRITE STARTED..

Searching Phone Please wait...

Phone Found Wait...
TEST MODE OK..
Details. SM-G530T1,REV0.1,G530T1UVU1AOH9,G530T1UVU1AOH9,G530T1 UV
Model := SM-G530T1
SWVer := G530T1UVU1AOH9
UNIQID := CQN0038F2C88A52
Phone IMEI := 359128060XXXXX
Device Knox Warranty is := Void
Default MSL NO NEED RESET EFS...
MSL Autho Pass..
Update SerialNumber ok..
Update IMEI Ok..
SKEY := 0816
QCOM(QUALCOMM) detected..
Checking imeisign...
IMEI-1 SIGN PASS..
Update Simlock Ok..
Wifi_mac := AC5A1467D632
Wifi_mac update ok.
ROOT KEY GOOD..
Fixing FTM ok..
Sync Backups...
Repairing finish...

!!! SUCCESS !!!!
Total Time Take...00:02:25
Log Saved
Failed getses0..
Card Error..0x821

Write QCN backup

Selected Port SAMSUNG Mobile USB Serial Port COM5
Selected Model SM-G530T1
Selected Task NV_QCN WRITE

Searching phone...

Build...MPSS.DPM.2.0.c5-00106-M8936FAAAANUZM-1

Please wait till finish...

!!! SUCCESS !!!

* Conclusion

Check the work of repair..
in my case i found success but with MIPI DEVICE FAIL:
No service
NETWORK : UNBLOCK
IMEI Certi: PASS,1
Unknown
MIPI DEVICE FAIL
DEVICE MID=0x217, PID=0x021

Solved that issue rather quickly with the help of user jkar5600

http://forum.gsmhosting.com/vbb/f258...l#post13145572

Now have fully functional tested working phone

UNLOCK not tested

stanner_austin · 07-10-2018, 09:09

@Stunman112
Hello
You can skip root.
You can skip QCN because we are not erasing calibration,cert,etc only msl is erased..
You just need Newqc unlock and imeicert write via uart that's all.

gsm_service4u · 07-11-2018, 00:52

Quote:

Originally Posted by stanner_austin

@Stunman112
Hello
You can skip root.
You can skip QCN because we are not erasing calibration,cert,etc only msl is erased..
You just need Newqc unlock and imeicert write via uart that's all.

For G530T,T1 NewQC unlock reports success however phone remains locked.

Had to use Tmobile Unlock with ASK/RPL - credits for unlock..

Stunman112 · 07-11-2018, 01:19

Quote:

Originally Posted by gsm_service4u

For G530T,T1 NewQC unlock reports success however phone remains locked.

Had to use Tmobile Unlock with ASK/RPL - credits for unlock..

We will use NewQC for msl reset only not actual unlock for this device. Yes it is app locked so we will follow the server ASK/RPL

Sent from my SM-G530T1 using Tapatalk

07-09-2018, 19:05	#1 (permalink)
Stunman112 No Life Poster Join Date: May 2016 Location: 574 Age: 31 Posts: 761 Member: 2567774 Status: Offline Thanks Meter: 255	SM-G530T/T1 Write IMEI Cert UART successful Phones original IMEI was under blacklist and could not be used on any networks in USA. Solved issue with a new cert backup and .QCN from similar phone. Thanks GCPro did it..* (See conclusion) ROOT is needed with SU installed and SELinux Permissive I used "TrapKernal_G530T_A0F8_Root.tar" (KnoX will be VoiD anyway) https://androidfilehost.com/?fid=24052804347817375 LOGs: Selected Model SM-G530T Selected Task SAM Readinfo ADB Searching ADB Devices... Device Detected... SELinux := Permissive model:= SM-G530T1 Androids Version:= 5.1.1 Description Version:= gprimeltemtr-user 5.1.1 LMY47X G530T1UVU1AOH9 release-keys Platform:= msm8916 [ qcom ] [ MSM8916 ] Baseband:= G530T1UVU1AOH9 VER:= G530T1UVU1AOH9/G530T1TMB1AOH9/G530T1UVU1AOH9/G530T1UVU1AOH9 Carrier := TMB_USA EFS CSC := TMB Knox Warranty := Void AP UART Status := Enable Already. Network Mode := 0 Simstatus:= ABSENT BusyBox version := 1.23.2 ANDROID-ID = 38f2c88a_0000A7EBDA SU Version..2.50:SUPERSU Device is Secure Rooted..uid=0 System Permission is Read/Write... Enable DIAG mode.. Then do NewQC Unlock.. Using Version...1.0.0.0058 Selected Port SAMSUNG Mobile USB Serial Port COM5 Selected Model SM-G530T1 Selected Task SAMSUNG NEW-QC UNLOCK Searching phone... Build...MPSS.DPM.2.0.c5-00106-M8936FAAAANUZM-1 Device Detected... SELinux := Permissive model:= SM-G530T1 Androids Version:= 5.1.1 Description Version:= gprimeltemtr-user 5.1.1 LMY47X G530T1UVU1AOH9 release-keys Platform:= msm8916 [ qcom ] [ MSM8916 ] Baseband:= G530T1UVU1AOH9 VER:= G530T1UVU1AOH9/G530T1TMB1AOH9/G530T1UVU1AOH9/G530T1UVU1AOH9 Carrier := TMB_USA EFS CSC := TMB Knox Warranty := Void AP UART Status := Enable Already. Network Mode := 0 Simstatus:= ABSENT BusyBox version := 1.23.2 ANDROID-ID = 38f2c88a_00006EC602 SU Version..2.50:SUPERSU Device is Secure Rooted..uid=0 System Permission is Read/Write... SAMSUNG NEW-QC UNLOCK Started.. Direct Unlock Success... Now setup phone to use UART box cable and start Selected Port USB Serial Port COM2 Selected Model SM-G530T1 Selected Task SAM CERT WRITE ALL SAMSUNG CERT WRITE STARTED.. Searching Phone Please wait... Phone Found Wait... TEST MODE OK.. Details. SM-G530T1,REV0.1,G530T1UVU1AOH9,G530T1UVU1AOH9,G530T1 UV Model := SM-G530T1 SWVer := G530T1UVU1AOH9 UNIQID := CQN0038F2C88A52 Phone IMEI := 359128060XXXXX Device Knox Warranty is := Void Default MSL NO NEED RESET EFS... MSL Autho Pass.. Update SerialNumber ok.. Update IMEI Ok.. SKEY := 0816 QCOM(QUALCOMM) detected.. Checking imeisign... IMEI-1 SIGN PASS.. Update Simlock Ok.. Wifi_mac := AC5A1467D632 Wifi_mac update ok. ROOT KEY GOOD.. Fixing FTM ok.. Sync Backups... Repairing finish... !!! SUCCESS !!!! Total Time Take...00:02:25 Log Saved Failed getses0.. Card Error..0x821 Write QCN backup Selected Port SAMSUNG Mobile USB Serial Port COM5 Selected Model SM-G530T1 Selected Task NV_QCN WRITE Searching phone... Build...MPSS.DPM.2.0.c5-00106-M8936FAAAANUZM-1 Please wait till finish... !!! SUCCESS !!! * Conclusion Check the work of repair.. in my case i found success but with MIPI DEVICE FAIL: No service NETWORK : UNBLOCK IMEI Certi: PASS,1 Unknown MIPI DEVICE FAIL DEVICE MID=0x217, PID=0x021 Solved that issue rather quickly with the help of user jkar5600 http://forum.gsmhosting.com/vbb/f258...l#post13145572 Now have fully functional tested working phone UNLOCK not tested

07-10-2018, 09:09	#2 (permalink)
stanner_austin No Life Poster Join Date: Jan 2004 Location: Unknown Age: 39 Posts: 9,227 Member: 49752 Status: Offline Sonork: QQ:1474246528 Thanks Meter: 6,085	@Stunman112 Hello You can skip root. You can skip QCN because we are not erasing calibration,cert,etc only msl is erased.. You just need Newqc unlock and imeicert write via uart that's all.