Huawei Ascend G610-U20 flashing hang on logo only vibrate solutation 10000 %%% tested - Page 3 - GSM-Forum

diavas2007 · 02-03-2016, 14:55

SP_Flash_Tool_v3.1320.0.174_Secboot with this firmware worked for me (G610-U20):
https://yadi.sk/d/Ygxwh5CnKK7qg

Credits: Hamza1010 - xda forum

laleine · 02-13-2016, 17:42

hi,,,good day,,i'm a filipino,,,can you plz give me another link that i can understand,,,plzzz

diavas2007 · 02-22-2016, 14:46

1. download firmware
2. unzip
3. use SP_Flash_Tool_v3.1320.0.174_Secboot from update tool folder
4. run flash_tool.exe
5. select scatterfile USB_Upgrade\MT6589_Android_scatter_emmc.txt
6. press download
7. connect powered off phone to usb and wait to finish

gsm_eprom · 02-22-2016, 19:07

re-hoot emmc chip
most phones work solution..

sarry86 · 04-08-2016, 18:25

Quote:

Originally Posted by abo anas zayan

i have dump readed by cm2,
6583_Temp_dump

How do i flash this?

yobaaa · 06-19-2016, 08:35

after installing software .. mobile working just fine thanks bro.

but .... GPs doesn't start at all !! any help?!

SAEIDSANGAN · 08-18-2016, 07:53

hi bro
g610 only vib no logo only only vib
hardware problem

NKhan_Gsm · 08-18-2016, 10:30

Quote:

Originally Posted by SAEIDSANGAN

hi bro
g610 only vib no logo only only vib
hardware problem

Can you share its HW solution ?

WBR

ehsanjafari · 10-02-2016, 09:11

Quote:

Originally Posted by the_faker

memory card method dont work plzzz try to flash with sptool if dont work plzz

contact with me..........

hello my friend I have one G610-U20 with the same problem when powering just vibrate and show logo the restart
I flash with SD card but not show any thing in dload folder (fat32)

I try to flash with SPtool with any versions but error in beginning ( its write emmc when selecting from memory but not flashing normal in sptool after that)

I confused what do I do?

please help me!!!

ehsanjafari · 10-02-2016, 09:23

Quote:

Originally Posted by the_faker

memory card method dont work plzzz try to flash with sptool if dont work plzz

contact with me..........

hello my friend I have one G610-U20 with the same problem when powering just vibrate and show logo the restart
I flash with SD card but not show any thing in dload folder (fat32)

I try to flash with SPtool with any versions but error in beginning ( its write emmc when selecting from memory but not flashing normal in sptool after that)

I confused what do I do?

please help me!!!

Nomi1987 · 11-02-2016, 14:35

Quote:

Originally Posted by ZIYAAD STRYKER

it has both via usb n micro sd when i put update.app in dload folder on micro sd card doesnt find update.app on recovery but find the folder

when flash via flashtool i get an error detects phone im uploading pic, can any 1 help plz

http://forum.gsmhosting.com/vbb/f929...olved-2141327/

check this bro

loloyski2 · 11-11-2016, 05:28

Hi! Same problem her. Huawei g610-u20 dead only vibrate.
Can you send me a link? I think link you give s already broken.

Thanks n advance

zoyebsk · 11-20-2016, 23:20

I have huawei ascend g610-u00. I have tried all above mention methods but none of them work for me so please help me to find any solution ? ? ? ? As soon as possible!!!!

zeerik · 12-29-2016, 15:45

Quote:

Originally Posted by diavas2007

SP_Flash_Tool_v3.1320.0.174_Secboot with this firmware worked for me (G610-U20):
https://yadi.sk/d/Ygxwh5CnKK7qg

Credits: Hamza1010 - xda forum

100% tested .........................after flash set is working now

hsilent17 · 04-19-2017, 07:17

can you send a new link

02-03-2016, 14:55	#31 (permalink)
diavas2007 Freak Poster Join Date: Dec 2008 Posts: 175 Member: 921325 Status: Offline Thanks Meter: 20	SP_Flash_Tool_v3.1320.0.174_Secboot with this firmware worked for me (G610-U20): https://yadi.sk/d/Ygxwh5CnKK7qg Credits: Hamza1010 - xda forum

02-13-2016, 17:42	#32 (permalink)
laleine Junior Member Join Date: Feb 2016 Posts: 2 Member: 2531254 Status: Offline Sonork: laleine Thanks Meter: 0	hi,,,good day,,i'm a filipino,,,can you plz give me another link that i can understand,,,plzzz

02-22-2016, 14:46	#33 (permalink)
diavas2007 Freak Poster Join Date: Dec 2008 Posts: 175 Member: 921325 Status: Offline Thanks Meter: 20	1. download firmware 2. unzip 3. use SP_Flash_Tool_v3.1320.0.174_Secboot from update tool folder 4. run flash_tool.exe 5. select scatterfile USB_Upgrade\MT6589_Android_scatter_emmc.txt 6. press download 7. connect powered off phone to usb and wait to finish

02-22-2016, 19:07	#34 (permalink)
gsm_eprom Freak Poster Join Date: Oct 2005 Location: amsterdam Posts: 268 Member: 191258 Status: Offline Thanks Meter: 36	re-hoot emmc chip most phones work solution..

06-19-2016, 08:35	#36 (permalink)
yobaaa Junior Member Join Date: Mar 2004 Age: 39 Posts: 20 Member: 56456 Status: Offline Thanks Meter: 0	after installing software .. mobile working just fine thanks bro. but .... GPs doesn't start at all !! any help?!

08-18-2016, 07:53	#37 (permalink)
SAEIDSANGAN Freak Poster Join Date: Nov 2011 Location: IRAN Age: 39 Posts: 190 Member: 1691551 Status: Offline Sonork: 100.1622582 Thanks Meter: 53	hi bro g610 only vib no logo only only vib hardware problem

11-11-2016, 05:28	#42 (permalink)
loloyski2 Junior Member Join Date: Oct 2016 Location: Baesao Quezon city Philippines Posts: 1 Member: 2641766 Status: Offline Thanks Meter: 0	Hi! Same problem her. Huawei g610-u20 dead only vibrate. Can you send me a link? I think link you give s already broken. Thanks n advance

11-20-2016, 23:20	#43 (permalink)
zoyebsk Junior Member Join Date: Nov 2016 Posts: 1 Member: 2651413 Status: Offline Thanks Meter: 0	I have huawei ascend g610-u00. I have tried all above mention methods but none of them work for me so please help me to find any solution ? ? ? ? As soon as possible!!!!

04-19-2017, 07:17	#45 (permalink)
hsilent17 Junior Member Join Date: Jan 2017 Posts: 6 Member: 2673033 Status: Offline Thanks Meter: 0	can you send a new link