huwaei y550-l01 qfil files - GSM-Forum

..::AppleLinks::.. · 02-16-2018, 12:46

hi i need huwaei y550-l01 qfil files i already checked cm2qualcome files and meudsa usb files.phone show only qualcome usb port 9008.here i s logs.

Code:

Loading firmware ... 

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand    : Huawei
Device Manufact.: HUAWEI
Device Model    : hwY550-L01
Device CPU      : MSM8916
Device IntName  : Y550-L01
Device Version  : 4.4.4
CU_SWVer        : HUAWEI
Device Compile  : 2014.09.26. 12:30:00
Device ExtInfo  : HUAWEI Y550-L01
Load Ok!

Operation : Flash [ v1.15 ]
ForceFlashing : Enabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0FEADDC6
ID_BLOCK_I : 007050E1
ID_BLOCK_L : C3255FA7169C898463D83825E2B93911
ID_BLOCK_L : A1DC62CDCE51F90A8F6E2398EA051338
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000000E9000000 [ eMMC 4 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Flash Chain : 26
Flashing now

Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : hyp.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : emmc_appsboot.mbn
Flashing : oemdata.bin
Flashing : NON-HLOS.bin
Flashing : fs_gc.img
Flashing : persist.img
Flashing : boot.img
Flashing : recovery.img
Flashing : cust.img
Flashing : cache.img
Flashing : system.img
Flashing : userdata.img

Code:

Welcome to Medusa Pro Software version 1.5.3. 
Started.
Reader #0: Generic USB Smart Card Reader 0
Reader #1: Generic USB Smart Card Reader 1

Model Settings:
Interface : USB
Brand     : Huawei
Model     : Y550-L01
SRF       : F:/Backup Data/TORNADO/TOOL_BOXs/MEDUSA/MEDUSA PRO/firmwareFolder/HUAWEI_Y550-L01_USB.srf
Core      : Qualcomm MSM8916
Loader    : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device       : CoreID_007050E1
Core         : Qualcomm MSM8916
Page size    : 512 B
Block size   : 512 B
Block count  : 7634944
Size         : 3728.00 MB
Connect successful.
---------------------------------------------------------------
SW: 1.5.3; FW: 1.22.
P00: GPT              (00000000, 00000022)    17 KB
P01: sbl1             (00000022, 00000400)    512 KB
P02: hyp              (00000422, 00000400)    512 KB
P03: sec              (00002000, 00000040)    32 KB
P04: DDR              (00002040, 00000040)    32 KB
P05: rpm              (00004000, 00000400)    512 KB
P06: tz               (00004400, 00000400)    512 KB
P07: aboot            (00004800, 00002780)    4.938 MB
P08: pad              (00006F80, 00000800)    1024 KB
P09: oeminfo          (00007780, 00020000)    64 MB
P10: modemst1         (00027780, 00002000)    4 MB
P11: modemst2         (00029780, 00002000)    4 MB
P12: modem            (0002C000, 00030000)    96 MB
P13: fsg              (0005C000, 00002000)    4 MB
P14: fsc              (0005E000, 00001000)    2048 KB
P15: ssd              (0005F000, 00001000)    2048 KB
P16: log              (00060000, 00020000)    64 MB
P17: persist          (00080000, 00010000)    32 MB
P18: boot             (00090000, 0000A000)    20 MB
P19: recovery         (0009A000, 0000C000)    24 MB
P20: cust             (000A6000, 00080000)    256 MB
P21: cache            (00126000, 00060000)    192 MB
P22: misc             (00186000, 00002000)    4 MB
P23: system           (00188000, 00280000)    1280 MB
P24: userdata         (00408000, 0033FFDF)    1664 MB
Repairing from file "F:/Backup Data/TORNADO/TOOL_BOXs/MEDUSA/MEDUSA PRO/firmwareFolder/HUAWEI_Y550-L01_USB.srf".
Write data verification is enabled.
Writing GPT partition...    Done.
Writing sbl1 partition...    Done.
Writing hyp partition...    Done.
Writing sec partition...    Done.
Writing DDR partition...    Done.
Writing rpm partition...    Done.
Writing tz partition...    Done.
Writing aboot partition...    Done.
Writing pad partition...    Done.
Writing oeminfo partition...    Done.
Writing modemst1 partition...    Done.
Writing modemst2 partition...    Done.
Writing modem partition...    Done.
Writing fsg partition...    Done.
Writing fsc partition...    Done.
Writing ssd partition...    Done.
Writing log partition...    Done.
Writing persist partition...    Done.
Writing boot partition...    Done.
Writing recovery partition...    Done.
Writing cust partition...    Done.
Writing cache partition...    Done.
Writing misc partition...    Done.

Smart Repair is successfully complete.
SW: 1.5.3; FW: 1.22.
Disconnected.

Model Settings:
Interface : USB
Brand     : Huawei
Model     : Y550-L01
SRF       : F:/Backup Data/TORNADO/TOOL_BOXs/MEDUSA/MEDUSA PRO/firmwareFolder/HUAWEI_Y550-L01_USB.srf
Core      : Qualcomm MSM8916
Loader    : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device       : CoreID_007050E1
Core         : Qualcomm MSM8916
Page size    : 512 B
Block size   : 512 B
Block count  : 7634944
Size         : 3728.00 MB
Connect successful.
---------------------------------------------------------------
SW: 1.5.3; FW: 1.22.
P00: GPT              (00000000, 00000022)    17 KB
P01: sbl1             (00000022, 00000400)    512 KB
P02: hyp              (00000422, 00000400)    512 KB
P03: sec              (00002000, 00000040)    32 KB
P04: DDR              (00002040, 00000040)    32 KB
P05: rpm              (00004000, 00000400)    512 KB
P06: tz               (00004400, 00000400)    512 KB
P07: aboot            (00004800, 00002780)    4.938 MB
P08: pad              (00006F80, 00000800)    1024 KB
P09: oeminfo          (00007780, 00020000)    64 MB
P10: modemst1         (00027780, 00002000)    4 MB
P11: modemst2         (00029780, 00002000)    4 MB
P12: modem            (0002C000, 00030000)    96 MB
P13: fsg              (0005C000, 00002000)    4 MB
P14: fsc              (0005E000, 00001000)    2048 KB
P15: ssd              (0005F000, 00001000)    2048 KB
P16: log              (00060000, 00020000)    64 MB
P17: persist          (00080000, 00010000)    32 MB
P18: boot             (00090000, 0000A000)    20 MB
P19: recovery         (0009A000, 0000C000)    24 MB
P20: cust             (000A6000, 00080000)    256 MB
P21: cache            (00126000, 00060000)    192 MB
P22: misc             (00186000, 00002000)    4 MB
P23: system           (00188000, 00280000)    1280 MB
P24: userdata         (00408000, 00357FDF)    1712 MB
Disconnected.

Model Settings:
Interface : USB
Brand     : Huawei
Model     : Y550-L01
SRF       : F:/Backup Data/TORNADO/TOOL_BOXs/MEDUSA/MEDUSA PRO/firmwareFolder/HUAWEI_Y550-L01_USB.srf
Core      : Qualcomm MSM8916
Loader    : QLoader_v1

Connecting...
Cancelled.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...

ERROR[001]: Can not connect. No target device present.

Model Settings:
Interface : USB
Brand     : Huawei
Model     : Y550-L01
SRF       : F:/Backup Data/TORNADO/TOOL_BOXs/MEDUSA/MEDUSA PRO/firmwareFolder/HUAWEI_Y550-L01_USB.srf
Core      : Qualcomm MSM8916
Loader    : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device       : CoreID_007050E1
Core         : Qualcomm MSM8916
Page size    : 512 B
Block size   : 512 B
Block count  : 7634944
Size         : 3728.00 MB
Connect successful.
---------------------------------------------------------------
SW: 1.5.3; FW: 1.22.
P00: GPT              (00000000, 00000022)    17 KB
P01: sbl1             (00000022, 00000400)    512 KB
P02: hyp              (00000422, 00000400)    512 KB
P03: sec              (00002000, 00000040)    32 KB
P04: DDR              (00002040, 00000040)    32 KB
P05: rpm              (00004000, 00000400)    512 KB
P06: tz               (00004400, 00000400)    512 KB
P07: aboot            (00004800, 00002780)    4.938 MB
P08: pad              (00006F80, 00000800)    1024 KB
P09: oeminfo          (00007780, 00020000)    64 MB
P10: modemst1         (00027780, 00002000)    4 MB
P11: modemst2         (00029780, 00002000)    4 MB
P12: modem            (0002C000, 00030000)    96 MB
P13: fsg              (0005C000, 00002000)    4 MB
P14: fsc              (0005E000, 00001000)    2048 KB
P15: ssd              (0005F000, 00001000)    2048 KB
P16: log              (00060000, 00020000)    64 MB
P17: persist          (00080000, 00010000)    32 MB
P18: boot             (00090000, 0000A000)    20 MB
P19: recovery         (0009A000, 0000C000)    24 MB
P20: cust             (000A6000, 00080000)    256 MB
P21: cache            (00126000, 00060000)    192 MB
P22: misc             (00186000, 00002000)    4 MB
P23: system           (00188000, 00280000)    1280 MB
P24: userdata         (00408000, 00357FDF)    1712 MB
Selected rawprogram XML file: C:/Users/FAISAL RAHMAN/Desktop/MSM891~1.4__/MSM891~1.4__/MSM891~1.4__/INFINI~1.XML.
Selected rawprogram XML file: C:/Users/FAISAL RAHMAN/Desktop/MSM891~1.4__/MSM891~1.4__/MSM891~1.4__/INFINI~1.XML.
Selected rawprogram XML file: C:/Users/FAISAL RAHMAN/Desktop/MSM891~1.4__/MSM891~1.4__/MSM891~1.4__/INFINI~1.XML.

note:cm2qualcome files not supported by any other tools even not supported by medusa pro

..::AppleLinks::.. · 02-17-2018, 07:07

no one have a couples of minutes to read or check any link for me.....????

**...:::::NP™:::::...** · 02-17-2018, 10:12

Hi,

You can study the full thread & try to flash with eDL mode also this firmware http://forum.gsmhosting.com/vbb/12738573-post19.html

..::AppleLinks::.. · 02-19-2018, 06:54

Quote:

Originally Posted by ...:::::np™:::::...

hi,

you can study the full thread & try to flash with edl mode also this firmware http://forum.gsmhosting.com/vbb/12738573-post19.html

i already checked cm2 infinity dongle read flash files it fails on user-data at the very end.and i already connect phone to medusa-box with direct emmc connection,but i have no xml or boot files...

**...:::::NP™:::::...** · 02-19-2018, 07:01

So you have to wait for dump files from professional tools.

Sent from my SM-P555 using Tapatalk

..::AppleLinks::.. · 02-23-2018, 16:44

Quote:

Originally Posted by ...:::::NP[emoji769

:::::...;12974581]So you have to wait for dump files from professional tools.

Sent from my SM-P555 using Tapatalk

So can u plz explain it more.........how.

Sent from my iPad using Tapatalk

02-17-2018, 10:12	#3 (permalink)
...:::::NP™:::::... Moderator Join Date: Nov 2009 Location: €urope Age: 41 Posts: 11,041 Member: 1162626 Status: Offline Sonork: 100.1591727 QQ:2337938173 Thanks Meter: 11,109	Hi, You can study the full thread & try to flash with eDL mode also this firmware http://forum.gsmhosting.com/vbb/12738573-post19.html __________________ -------------------------- Use Search Button to get Instant Result \| Follow Forum Rules Avoid Spams in the forum to prevent ban your account.

02-19-2018, 07:01	#5 (permalink)
...:::::NP™:::::... Moderator Join Date: Nov 2009 Location: €urope Age: 41 Posts: 11,041 Member: 1162626 Status: Offline Sonork: 100.1591727 QQ:2337938173 Thanks Meter: 11,109	So you have to wait for dump files from professional tools. Sent from my SM-P555 using Tapatalk __________________ -------------------------- Use Search Button to get Instant Result \| Follow Forum Rules Avoid Spams in the forum to prevent ban your account.

02-17-2018, 07:07	#2 (permalink)
..::AppleLinks::.. No Life Poster Join Date: Apr 2006 Location: APPLE i Center Age: 39 Posts: 1,751 Member: 264667 Status: Offline Sonork: 100.105892 Thanks Meter: 481	no one have a couples of minutes to read or check any link for me.....????