Y600-U20 hang on logo - GSM-Forum

naveed akhatr · 11-28-2014, 02:35

help me plz uawei y600-u20 hang on logo
i make hardreset but same,plz help me

Abdullah Shafiq · 11-28-2014, 04:40

Quote:

Originally Posted by naveed akhatr

help me plz uawei y600-u20 hang on logo
i make hardreset but same,plz help me

ROM HUAWEI Y600-U20 | [Official] add the 10/23/2014 on Needrom

Download this firmware and flash using SP Flashtool.
Then make hard reset and check.

Best Regards
Abdullah Shafique

Abdullah Shafiq · 11-29-2014, 04:58

Quote:

Originally Posted by naveed akhatr

thx sir abdulha shafiq sir

Done >>>??
Welcome Bro anytime..

Best Regards
Abdullah Shafique

wadjayy · 10-20-2015, 14:25

ROM Mobile HUAWEI Y600-U20 – ROM Android 4.2.2
Official ROM HUAWEI Y600-U20 Unicom version: Y600-U20V100R001C467B002
Gapps include – No Rooted
Language support: Multilang

Install ROM:
1.copy ****.zip to root folder of the phone SD card (no need to unzip).
2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again and it will show as below
3.Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.
4.Choose “yes—delete all user data”, then press volume+ button to enter the page as below.
5.It will enter below page after finishing delete all user data.
6.Then choose“apply update from sdcard”
7.Find and select the ROM, press volume+ to enter the page as below.
8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.
9.Choose “reboot system now”,then press volume+ button to reboot your phone.

download

100/100 tested by me

babarmaqbool · 10-20-2015, 15:27

update firmware with sd card

Asifshaukat · 11-02-2015, 13:20

Quote:

Originally Posted by Abdullah Shafiq

Done >>>??
Welcome Bro anytime..

Best Regards
Abdullah Shafique

thanks dear good work

roybondo7 · 11-21-2015, 13:37

thangs yar i am not sure but downloading file lets see wats hapen

ndamz · 01-28-2016, 03:13

hi
when i try system partition check its say system framework failed system have been rooted
apply update from sdcard ita saying insttallation aborted
help

amilacell · 02-15-2016, 08:07

my huawei y600-u20 only show logo.i tried to flash lot of time with different flash file.flashing 100% sucses.but problam not solve.please help me
thank you

Nomi1987 · 04-25-2016, 14:55

Quote:

Originally Posted by amilacell

my huawei y600-u20 only show logo.i tried to flash lot of time with different flash file.flashing 100% sucses.but problam not solve.please help me
thank you

i have also same problem

FaizanChauhaan · 04-26-2016, 22:58

Update General Version firmware via SD card

Roddy68 · 05-01-2016, 15:41

help me plz uawei y600-u20 hang on logo

Nomi1987 · 05-01-2016, 15:50

Quote:

Originally Posted by amilacell

my huawei y600-u20 only show logo.i tried to flash lot of time with different flash file.flashing 100% sucses.but problam not solve.please help me
thank you

i have also same problem,i format it with sp tool,but not luck after tht i erased whole flash with bootloader than flash it,flash procseger complete but still same.i again erase whole flash with bootloader than flash with 2 other firmwares but still same.

kile · 05-31-2016, 16:47

I have a Huawei Y600-U20 Smart phone that fails to boot, it stucks at Huawei Logo.

I had this problem before and i was able to flash it through recovery mode with this firmware Y600-U20_V100R001C456B008_Firmware_Malaysia_Indonesia_P hilippines_Others_05021NTQ (SD card). It worked for months.

It suddenly stuck at boot. Now i cannot use the recovery mode to flash the same firmware, i can enter the recovery mode but the android recovery mode seems faulty, the android robot is displayed but keeps blinking after every few second. There are no command menus displayed as it used to.

Lately through other forums that i have read and technical advice from other users. I was advised to use Y600-U20V100R001C435B012_DCC with SP_Flash_Tool_v5.1524.00.000.

The following happened:
1. The Stuck Huawei logo changed to Huawei Ascend and still stuck at boot screen.

2. The SP Flash just does the Download process and displays okay mark. It never goes to flashing stage.

3. Trying again to go to Recovery mode after this process still displays the dead/sleeping android logo.

Can you please help me on how to revive the recovery mode so that i can flash my phone.

NB: When i connect to the PC/Laptop the same Huawei logo appears. Is there any way to flash the phone?.
Am trying to upload the screenshots but unable to.

Your assistance is highly appreciated.

yousaf.awan · 08-10-2016, 16:12

Please help Huawei y600 u20 Hang On ascend Huawei logo 4 different Flash File flashing 100% sucses.but problam not solve.kindly to be helped me.

11-28-2014, 02:35	#1 (permalink)
naveed akhatr Junior Member Join Date: Jan 2008 Posts: 4 Member: 675183 Status: Offline Thanks Meter: 1	Y600-U20 hang on logo help me plz uawei y600-u20 hang on logo i make hardreset but same,plz help me

05-01-2016, 15:41	#12 (permalink)
Roddy68 Junior Member Join Date: May 2016 Posts: 1 Member: 2567114 Status: Offline Thanks Meter: 0	Need help help me plz uawei y600-u20 hang on logo

10-20-2015, 14:25	#4 (permalink)
wadjayy Freak Poster Join Date: Mar 2004 Age: 49 Posts: 158 Member: 57544 Status: Offline Thanks Meter: 1	ROM Mobile HUAWEI Y600-U20 – ROM Android 4.2.2 Official ROM HUAWEI Y600-U20 Unicom version: Y600-U20V100R001C467B002 Gapps include – No Rooted Language support: Multilang Install ROM: 1.copy ****.zip to root folder of the phone SD card (no need to unzip). 2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again and it will show as below 3.Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm. 4.Choose “yes—delete all user data”, then press volume+ button to enter the page as below. 5.It will enter below page after finishing delete all user data. 6.Then choose“apply update from sdcard” 7.Find and select the ROM, press volume+ to enter the page as below. 8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished. 9.Choose “reboot system now”,then press volume+ button to reboot your phone. download 100/100 tested by me

10-20-2015, 15:27	#5 (permalink)
babarmaqbool Freak Poster Join Date: Oct 2015 Location: Pakistan Posts: 285 Member: 2475109 Status: Offline Thanks Meter: 140	update firmware with sd card

11-21-2015, 13:37	#7 (permalink)
roybondo7 Junior Member Join Date: Feb 2010 Posts: 3 Member: 1245949 Status: Offline Thanks Meter: 0	thangs yar i am not sure but downloading file lets see wats hapen

01-28-2016, 03:13	#8 (permalink)
ndamz Junior Member Join Date: Jan 2016 Posts: 1 Member: 2522190 Status: Offline Sonork: elson Thanks Meter: 0	hi when i try system partition check its say system framework failed system have been rooted apply update from sdcard ita saying insttallation aborted help

02-15-2016, 08:07	#9 (permalink)
amilacell Insane Poster Join Date: May 2011 Posts: 92 Member: 1577206 Status: Offline Sonork: amila123 Thanks Meter: 6	my huawei y600-u20 only show logo.i tried to flash lot of time with different flash file.flashing 100% sucses.but problam not solve.please help me thank you

04-26-2016, 22:58	#11 (permalink)
FaizanChauhaan Freak Poster Join Date: Apr 2016 Location: Karachi Posts: 348 Member: 2564757 Status: Offline Sonork: 100.1673410 Thanks Meter: 27	Update General Version firmware via SD card

05-31-2016, 16:47	#14 (permalink)
kile Junior Member Join Date: Jan 2011 Location: Tanzania Posts: 22 Member: 1485647 Status: Offline Thanks Meter: 1	I have a Huawei Y600-U20 Smart phone that fails to boot, it stucks at Huawei Logo. I had this problem before and i was able to flash it through recovery mode with this firmware Y600-U20_V100R001C456B008_Firmware_Malaysia_Indonesia_P hilippines_Others_05021NTQ (SD card). It worked for months. It suddenly stuck at boot. Now i cannot use the recovery mode to flash the same firmware, i can enter the recovery mode but the android recovery mode seems faulty, the android robot is displayed but keeps blinking after every few second. There are no command menus displayed as it used to. Lately through other forums that i have read and technical advice from other users. I was advised to use Y600-U20V100R001C435B012_DCC with SP_Flash_Tool_v5.1524.00.000. The following happened: 1. The Stuck Huawei logo changed to Huawei Ascend and still stuck at boot screen. 2. The SP Flash just does the Download process and displays okay mark. It never goes to flashing stage. 3. Trying again to go to Recovery mode after this process still displays the dead/sleeping android logo. Can you please help me on how to revive the recovery mode so that i can flash my phone. NB: When i connect to the PC/Laptop the same Huawei logo appears. Is there any way to flash the phone?. Am trying to upload the screenshots but unable to. Your assistance is highly appreciated.

08-10-2016, 16:12	#15 (permalink)
yousaf.awan Freak Poster Join Date: Jan 2015 Location: muzaffarabad Ajk Posts: 150 Member: 2332177 Status: Offline Thanks Meter: 55	Please help Huawei y600 u20 Hang On ascend Huawei logo 4 different Flash File flashing 100% sucses.but problam not solve.kindly to be helped me.