HUABOX New Instructions & Manuals (2018/06/16) - GSM-Forum

Hua Supporter · 06-16-2018, 19:27

HUABOX New Instructions & Manuals

Hua Supporter · 06-16-2018, 19:31

HOW TO DIRECT UNLOCK MTK PHONES?

-NEED ROOT AND USB DEBUGGING
-PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE

HOW TO READ UNLOCK CODE MTK PHONES?

-NEED ROOT AND USB DEBUGGING
-PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE

Hua Supporter · 06-16-2018, 19:34

HOW TO REPAIR IMEI MTK PHONES?

-NEED ROOT AND USB DEBUGGING
-PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE

WE HAVE 8 METHOD FOR REPAIR IMEI BY ADB MODE
and
1 METHOD BY META MODE

MOST METHODS ARE PERMANENT

PERMANENT FIX IS FOR Serial No. : 0123456789ABCDEF(NEED REPAIR BY ASAN METHOD FIRST AND THEN USE PERMANENT FIX METHOD)

Hua Supporter · 06-16-2018, 19:34

HOW TO REPAIR INVALID IMEI BY RII FILE?

-NEED ROOT AND USB DEBUGGING AND BUSYBOX FOR REPAIR
-PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE
-RII FILE ARE ON HUA TEAM TELEGRAM CHANNAL

Hua Supporter · 06-16-2018, 19:35

HOW TO REPAIR INVALID IMEI WITHOUT SELECT FILE?

-NEED ROOT AND USB DEBUGGING AND BUSYBOX FOR REPAIR
-PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE
-NOT SUPPORTED ALL MTK CPU

Hua Supporter · 06-16-2018, 19:35

HOW TO READ AND WRITE NVRAM.TAR OR NVRAM.BIN?

-NEED ROOT AND USB DEBUGGING AND BUSYBOX FOR REPAIR
-PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE
-YOU CAN WRITE NVRAM BIN+TAR ON PHONE BY THIS METHOD

Hua Supporter · 06-16-2018, 19:36

HOW TO REPAIR IMEI MOST SPD PHONES WITHOUT ROOT?

-IMEI NULL IS NOT SUPPORTED
-NEED CONNECT PHONE TO DIAG MODE(DRIVER)
-CONTACT TO ME ON TELEGRAM IF NEED DRIVER
-PRESS ON BUTTON FIRST THEN REMOVE BATTERY AND INSERT USB CABLE TO PHONE

Hua Supporter · 06-16-2018, 19:37

HOW TO UNLOCK SAMSUNG EXYNOS PHONES WITHOUT ROOT?

-NO NEED ROOT(OLD SECURITY)
-JUST 11 SEC
-CONNECT PHONE TO MODEM MODE
-CHECK MODEM PORT ON DEVICE MANANGER BEFORE PRESS UNLOCK
-CHECK MODEM MODE ON PHONE SETTING IF NOT SHOW ON PC
-WRITE COMBINATION AND THEN TRY AGAIN IF MODEM PORT NOT FOUND

Hua Supporter · 06-16-2018, 19:38

HOW TO UNLOCK SAMSUNG QUALCOMM PHONES WITHOUT ROOT?

-NEW 2017/2018 PHONES IS NOT SUPPORTED(NEED MSL CODE)SAME J510
-NO NEED ROOT
-JUST 3 SEC
-CONNECT PHONE TO DIAG MODE(*#0808# OR ENABLE DIAG PORT BUTTONT ON HUA)
-CHECK DIAG PORT ON DEVICE MANANGER BEFORE PRESS UNLOCK
-CHECK DIAG MODE(RNDIS+DM+MODEM)ON PHONE SETTING IF NOT SHOW ON PC

Hua Supporter · 06-16-2018, 19:39

HOW TO REPAIR IMEI LG QUALCOMM PHONE WITHOUT ROOT?

-JUST 3 SEC
-DRIVER IS IMPORTANT FOR CONNECTION
-NEED ENABLE DIAG PORT BEFORE REPAIR
-NEED SELECT DIAG PORT ON PORT SETTING
-USE ENABLE DIAG PORT ON HUA/LG TAB OR ENTER CODE FOR DIAG

VIDEO

----------------------
Please, make sure that You perform these steps:To connect the phone in Normal Mode, do the next: Select "Charge Phone" in "USB PC Connection" menu. Type ##3424#, go to "Diag" menu and select "Enable". This menu is blocked by SPC/MSL.
----------------------------------
277634#*# -> Port check Test -> set Enabled. Reconnect device.

-----------------------
Select "tethering mode" after usb connection
-----------------------
Just enable usb developer mode(adb) plug phone
enter code: *#546368#*855#
Then in meniu choose SVC Menu
Then choose Port Check Test
And must enable it.
After all You can connect phone to PC by USB cable.
Then must install drivers.
--------------------------
Enable Diagnostic Port
1. 277634#*# or 3845#*#
2. Select Port Check Test
3. Enable Port Check Test
Reconnect Mobile
-----------------------
Please Type 277634#*# then find and set 'Port Check Test' to 'Enable',
----------------------------
use 3845#*505# OR *#546368#*505#
---------------------------------
Dial in the following codes on your phone (without pressing call). If the code works a hidden menu will apear. Find the option 'Port Check Test', and set it to 'Enabled'. It is usually in the top menu or in the 'SVC Menu' submenu.
277634#*#
3845#*631#
*#546368#*631#
---------------------------------
In case you can not get to the hidden menu, or the hidden menu does not contain the option 'Port Check Test', try Factory Reset on the phone.
DIAG mode serial found.
------------------------------
Please, type ##3424# to get SPC / MSL / Service Code...OK
Go to "Diag" menu and select "Enable" option.

Hua Supporter · 06-16-2018, 19:39

HOW TO UNLOCK LG QUALCOMM PHONE WITHOUT ROOT?

-JUST 3 SEC
-DRIVER IS IMPORTANT FOR CONNECTION
-NEED ENABLE DIAG PORT BEFORE REPAIR
-NEED SELECT DIAG PORT ON PORT SETTING
-USE ENABLE DIAG PORT ON HUA/LG TAB OR ENTER CODE FOR DIAG

VIDEO

----------------------
Please, make sure that You perform these steps:To connect the phone in Normal Mode, do the next: Select "Charge Phone" in "USB PC Connection" menu. Type ##3424#, go to "Diag" menu and select "Enable". This menu is blocked by SPC/MSL.
----------------------------------
277634#*# -> Port check Test -> set Enabled. Reconnect device.

-----------------------
Select "tethering mode" after usb connection
-----------------------
Just enable usb developer mode(adb) plug phone
enter code: *#546368#*855#
Then in meniu choose SVC Menu
Then choose Port Check Test
And must enable it.
After all You can connect phone to PC by USB cable.
Then must install drivers.
--------------------------
Enable Diagnostic Port
1. 277634#*# or 3845#*#
2. Select Port Check Test
3. Enable Port Check Test
Reconnect Mobile
-----------------------
Please Type 277634#*# then find and set 'Port Check Test' to 'Enable',
----------------------------
use 3845#*505# OR *#546368#*505#
---------------------------------
Dial in the following codes on your phone (without pressing call). If the code works a hidden menu will apear. Find the option 'Port Check Test', and set it to 'Enabled'. It is usually in the top menu or in the 'SVC Menu' submenu.
277634#*#
3845#*631#
*#546368#*631#
---------------------------------
In case you can not get to the hidden menu, or the hidden menu does not contain the option 'Port Check Test', try Factory Reset on the phone.
DIAG mode serial found.
------------------------------
Please, type ##3424# to get SPC / MSL / Service Code...OK
Go to "Diag" menu and select "Enable" option.

Hua Supporter · 06-16-2018, 19:43

HOW TO RESET SCREEN LOCK LG QUALCOMM PHONES WITHOUT ROOT ADN USB DEBUGGING?

Remove Screen Lock Manual:

- Connect Phone in 'Download Mode'
For Doing that: with Power off Phone Hold Volume Up Button then Connect USB Cable to Phone
- Install Need Driver if Windows Request
- in Select Port Select 'LGE AndroidNet USB Serial Port'
- Click on 'Remove Screen Lock' and Following rest Procedure

--OLD METHOD IS FOR 5.X.X/6.X.X PHONES
--NEW METHOD IS FOR NEW 2017/2018 ENCRYPTED PHONES

VIDEO

Hua Supporter · 06-16-2018, 19:51

How to repair imei on huawei y625 and y560 hexagon cpu?

-CONNECT PHONE TO PC MODE

-DRIVER INSTALL
-SELECT DB ADAPTER PORT
-ENABLE SKIP RESET SECURTIY
-SELECT HEXAGON METHOD
-PRESS REPAIR

Hua Supporter · 06-16-2018, 19:52

HOW TO DIRECT UNLOCK HUAWEI OLD SEC PHONES ?

-NEED ROOT AND USB DEBUGGING
-CHECK LIST MODEL BEFORE USE
http://forum.gsmhosting.com/vbb/f930...dated-2023678/

Hua Supporter · 06-16-2018, 19:53

HOW TO DIRECT UNLOCK MOTOROLA PHONES ?

-NO NEED ROOT
-NEED DOWNGRADE MODEM IF NOT SUPPORTED(NEW 2017 SEC PATCH)
-METHOD IS GENERIC AND MOST PHONES SUPPORTED
-SELECT DIAG PORT IN PORT SETTING BEFORE UNLOCK(FASTBOOT MODE/PB TOOL)

06-16-2018, 19:27	#1 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HUABOX New Instructions & Manuals (2018/06/16) HUABOX New Instructions & Manuals

06-16-2018, 19:31	#2 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO DIRECT UNLOCK MTK PHONES? -NEED ROOT AND USB DEBUGGING -PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE HOW TO READ UNLOCK CODE MTK PHONES? -NEED ROOT AND USB DEBUGGING -PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE

06-16-2018, 19:34	#3 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO REPAIR IMEI MTK PHONES? -NEED ROOT AND USB DEBUGGING -PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE WE HAVE 8 METHOD FOR REPAIR IMEI BY ADB MODE and 1 METHOD BY META MODE MOST METHODS ARE PERMANENT PERMANENT FIX IS FOR Serial No. : 0123456789ABCDEF(NEED REPAIR BY ASAN METHOD FIRST AND THEN USE PERMANENT FIX METHOD)

06-16-2018, 19:34	#4 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO REPAIR INVALID IMEI BY RII FILE? -NEED ROOT AND USB DEBUGGING AND BUSYBOX FOR REPAIR -PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE -RII FILE ARE ON HUA TEAM TELEGRAM CHANNAL

06-16-2018, 19:35	#5 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO REPAIR INVALID IMEI WITHOUT SELECT FILE? -NEED ROOT AND USB DEBUGGING AND BUSYBOX FOR REPAIR -PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE -NOT SUPPORTED ALL MTK CPU

06-16-2018, 19:35	#6 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO READ AND WRITE NVRAM.TAR OR NVRAM.BIN? -NEED ROOT AND USB DEBUGGING AND BUSYBOX FOR REPAIR -PRESS ON BUTTON FIRST THEN INSERT USB CABLE TO PHONE -YOU CAN WRITE NVRAM BIN+TAR ON PHONE BY THIS METHOD

06-16-2018, 19:36	#7 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO REPAIR IMEI MOST SPD PHONES WITHOUT ROOT? -IMEI NULL IS NOT SUPPORTED -NEED CONNECT PHONE TO DIAG MODE(DRIVER) -CONTACT TO ME ON TELEGRAM IF NEED DRIVER -PRESS ON BUTTON FIRST THEN REMOVE BATTERY AND INSERT USB CABLE TO PHONE

06-16-2018, 19:37	#8 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO UNLOCK SAMSUNG EXYNOS PHONES WITHOUT ROOT? -NO NEED ROOT(OLD SECURITY) -JUST 11 SEC -CONNECT PHONE TO MODEM MODE -CHECK MODEM PORT ON DEVICE MANANGER BEFORE PRESS UNLOCK -CHECK MODEM MODE ON PHONE SETTING IF NOT SHOW ON PC -WRITE COMBINATION AND THEN TRY AGAIN IF MODEM PORT NOT FOUND

06-16-2018, 19:38	#9 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO UNLOCK SAMSUNG QUALCOMM PHONES WITHOUT ROOT? -NEW 2017/2018 PHONES IS NOT SUPPORTED(NEED MSL CODE)SAME J510 -NO NEED ROOT -JUST 3 SEC -CONNECT PHONE TO DIAG MODE(*#0808# OR ENABLE DIAG PORT BUTTONT ON HUA) -CHECK DIAG PORT ON DEVICE MANANGER BEFORE PRESS UNLOCK -CHECK DIAG MODE(RNDIS+DM+MODEM)ON PHONE SETTING IF NOT SHOW ON PC

06-16-2018, 19:39	#10 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO REPAIR IMEI LG QUALCOMM PHONE WITHOUT ROOT? -JUST 3 SEC -DRIVER IS IMPORTANT FOR CONNECTION -NEED ENABLE DIAG PORT BEFORE REPAIR -NEED SELECT DIAG PORT ON PORT SETTING -USE ENABLE DIAG PORT ON HUA/LG TAB OR ENTER CODE FOR DIAG VIDEO ---------------------- Please, make sure that You perform these steps:To connect the phone in Normal Mode, do the next: Select "Charge Phone" in "USB PC Connection" menu. Type ##3424#, go to "Diag" menu and select "Enable". This menu is blocked by SPC/MSL. ---------------------------------- 277634## -> Port check Test -> set Enabled. Reconnect device. ----------------------- Select "tethering mode" after usb connection ----------------------- Just enable usb developer mode(adb) plug phone enter code: #546368#855# Then in meniu choose SVC Menu Then choose Port Check Test And must enable it. After all You can connect phone to PC by USB cable. Then must install drivers. -------------------------- Enable Diagnostic Port 1. 277634## or 3845## 2. Select Port Check Test 3. Enable Port Check Test Reconnect Mobile ----------------------- Please Type 277634## then find and set 'Port Check Test' to 'Enable', ---------------------------- use 3845#505# OR #546368#505# --------------------------------- Dial in the following codes on your phone (without pressing call). If the code works a hidden menu will apear. Find the option 'Port Check Test', and set it to 'Enabled'. It is usually in the top menu or in the 'SVC Menu' submenu. 277634## 3845#631# #546368#*631# --------------------------------- In case you can not get to the hidden menu, or the hidden menu does not contain the option 'Port Check Test', try Factory Reset on the phone. DIAG mode serial found. ------------------------------ Please, type ##3424# to get SPC / MSL / Service Code...OK Go to "Diag" menu and select "Enable" option.

06-16-2018, 19:39	#11 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO UNLOCK LG QUALCOMM PHONE WITHOUT ROOT? -JUST 3 SEC -DRIVER IS IMPORTANT FOR CONNECTION -NEED ENABLE DIAG PORT BEFORE REPAIR -NEED SELECT DIAG PORT ON PORT SETTING -USE ENABLE DIAG PORT ON HUA/LG TAB OR ENTER CODE FOR DIAG VIDEO ---------------------- Please, make sure that You perform these steps:To connect the phone in Normal Mode, do the next: Select "Charge Phone" in "USB PC Connection" menu. Type ##3424#, go to "Diag" menu and select "Enable". This menu is blocked by SPC/MSL. ---------------------------------- 277634## -> Port check Test -> set Enabled. Reconnect device. ----------------------- Select "tethering mode" after usb connection ----------------------- Just enable usb developer mode(adb) plug phone enter code: #546368#855# Then in meniu choose SVC Menu Then choose Port Check Test And must enable it. After all You can connect phone to PC by USB cable. Then must install drivers. -------------------------- Enable Diagnostic Port 1. 277634## or 3845## 2. Select Port Check Test 3. Enable Port Check Test Reconnect Mobile ----------------------- Please Type 277634## then find and set 'Port Check Test' to 'Enable', ---------------------------- use 3845#505# OR #546368#505# --------------------------------- Dial in the following codes on your phone (without pressing call). If the code works a hidden menu will apear. Find the option 'Port Check Test', and set it to 'Enabled'. It is usually in the top menu or in the 'SVC Menu' submenu. 277634## 3845#631# #546368#*631# --------------------------------- In case you can not get to the hidden menu, or the hidden menu does not contain the option 'Port Check Test', try Factory Reset on the phone. DIAG mode serial found. ------------------------------ Please, type ##3424# to get SPC / MSL / Service Code...OK Go to "Diag" menu and select "Enable" option.

06-16-2018, 19:43	#12 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO RESET SCREEN LOCK LG QUALCOMM PHONES WITHOUT ROOT ADN USB DEBUGGING? Remove Screen Lock Manual: - Connect Phone in 'Download Mode' For Doing that: with Power off Phone Hold Volume Up Button then Connect USB Cable to Phone - Install Need Driver if Windows Request - in Select Port Select 'LGE AndroidNet USB Serial Port' - Click on 'Remove Screen Lock' and Following rest Procedure --OLD METHOD IS FOR 5.X.X/6.X.X PHONES --NEW METHOD IS FOR NEW 2017/2018 ENCRYPTED PHONES VIDEO

06-16-2018, 19:51	#13 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	How to repair imei on huawei y625 and y560 hexagon cpu? -CONNECT PHONE TO PC MODE -DRIVER INSTALL -SELECT DB ADAPTER PORT -ENABLE SKIP RESET SECURTIY -SELECT HEXAGON METHOD -PRESS REPAIR

06-16-2018, 19:52	#14 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO DIRECT UNLOCK HUAWEI OLD SEC PHONES ? -NEED ROOT AND USB DEBUGGING -CHECK LIST MODEL BEFORE USE http://forum.gsmhosting.com/vbb/f930...dated-2023678/

06-16-2018, 19:53	#15 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	HOW TO DIRECT UNLOCK MOTOROLA PHONES ? -NO NEED ROOT -NEED DOWNGRADE MODEM IF NOT SUPPORTED(NEW 2017 SEC PATCH) -METHOD IS GENERIC AND MOST PHONES SUPPORTED -SELECT DIAG PORT IN PORT SETTING BEFORE UNLOCK(FASTBOOT MODE/PB TOOL)