J330 frp done(user report on telegram channel) - GSM-Forum

Hua Supporter · 10-04-2017, 00:13

[Forwarded from Amir hossein mehrabi]
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... Device Not Found!
Stopping ADB Service... OK
Operation Time: 00:00:34
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinUSB]
Error(1)!
Stopping ADB Service... OK
Operation Time: 00:00:02
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... Device Not Found!
Stopping ADB Service... OK
Operation Time: 00:00:44
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinUSB]
Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
Device Status: [ONLINE]
Bypassing Activation... OK
Turning On Oem Unlock... OK
Stopping ADB Service... OK
Operation Time: 00:00:10
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinUSB]
Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
Device Status: [ONLINE]
Bypassing Activation... OK
Turning On Oem Unlock... OK
Resetting Phone... OK
Stopping ADB Service... OK
Operation Time: 00:00:02
حذف frp j330

[Forwarded from Amir hossein mehrabi]
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... Device Not Found!
Stopping ADB Service... OK
Operation Time: 00:00:34
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinUSB]
Error(1)!
Stopping ADB Service... OK
Operation Time: 00:00:02
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... Device Not Found!
Stopping ADB Service... OK
Operation Time: 00:00:44
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinUSB]
Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
Device Status: [ONLINE]
Bypassing Activation... OK
Turning On Oem Unlock... OK
Stopping ADB Service... OK
Operation Time: 00:00:10
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinUSB]
Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
Device Status: [ONLINE]
Bypassing Activation... OK
Turning On Oem Unlock... OK
Resetting Phone... OK
Stopping ADB Service... OK
Operation Time: 00:00:02
حذف frp j330

10-04-2017, 00:13	#1 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	J330 frp done(user report on telegram channel) [Forwarded from Amir hossein mehrabi] For Android 2.x.x: 1- Turn-on the Phone Goto 'Settings > Application > Development' 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone For Android 4.x.x and Above: 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number' 2- Return to General Tab Tap on Developer Options 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME! Waiting For Device... Device Not Found! Stopping ADB Service... OK Operation Time: 00:00:34 For Android 2.x.x: 1- Turn-on the Phone Goto 'Settings > Application > Development' 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone For Android 4.x.x and Above: 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number' 2- Return to General Tab Tap on Developer Options 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME! Waiting For Device... OK[WinUSB] Error(1)! Stopping ADB Service... OK Operation Time: 00:00:02 For Android 2.x.x: 1- Turn-on the Phone Goto 'Settings > Application > Development' 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone For Android 4.x.x and Above: 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number' 2- Return to General Tab Tap on Developer Options 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME! Waiting For Device... Device Not Found! Stopping ADB Service... OK Operation Time: 00:00:44 For Android 2.x.x: 1- Turn-on the Phone Goto 'Settings > Application > Development' 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone For Android 4.x.x and Above: 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number' 2- Return to General Tab Tap on Developer Options 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME! Waiting For Device... OK[WinUSB] Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen! Device Status: [ONLINE] Bypassing Activation... OK Turning On Oem Unlock... OK Stopping ADB Service... OK Operation Time: 00:00:10 For Android 2.x.x: 1- Turn-on the Phone Goto 'Settings > Application > Development' 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone For Android 4.x.x and Above: 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number' 2- Return to General Tab Tap on Developer Options 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME! Waiting For Device... OK[WinUSB] Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen! Device Status: [ONLINE] Bypassing Activation... OK Turning On Oem Unlock... OK Resetting Phone... OK Stopping ADB Service... OK Operation Time: 00:00:02 حذف frp j330 [Forwarded from Amir hossein mehrabi] For Android 2.x.x: 1- Turn-on the Phone Goto 'Settings > Application > Development' 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone For Android 4.x.x and Above: 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number' 2- Return to General Tab Tap on Developer Options 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME! Waiting For Device... Device Not Found! Stopping ADB Service... OK Operation Time: 00:00:34 For Android 2.x.x: 1- Turn-on the Phone Goto 'Settings > Application > Development' 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone For Android 4.x.x and Above: 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number' 2- Return to General Tab Tap on Developer Options 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME! Waiting For Device... OK[WinUSB] Error(1)! Stopping ADB Service... OK Operation Time: 00:00:02 For Android 2.x.x: 1- Turn-on the Phone Goto 'Settings > Application > Development' 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone For Android 4.x.x and Above: 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number' 2- Return to General Tab Tap on Developer Options 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME! Waiting For Device... Device Not Found! Stopping ADB Service... OK Operation Time: 00:00:44 For Android 2.x.x: 1- Turn-on the Phone Goto 'Settings > Application > Development' 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone For Android 4.x.x and Above: 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number' 2- Return to General Tab Tap on Developer Options 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME! Waiting For Device... OK[WinUSB] Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen! Device Status: [ONLINE] Bypassing Activation... OK Turning On Oem Unlock... OK Stopping ADB Service... OK Operation Time: 00:00:10 For Android 2.x.x: 1- Turn-on the Phone Goto 'Settings > Application > Development' 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone For Android 4.x.x and Above: 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number' 2- Return to General Tab Tap on Developer Options 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME! Waiting For Device... OK[WinUSB] Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen! Device Status: [ONLINE] Bypassing Activation... OK Turning On Oem Unlock... OK Resetting Phone... OK Stopping ADB Service... OK Operation Time: 00:00:02 حذف frp j330