World'ss FIRST oppo F1F sim UNlock ALL boX fake this only work(success reports again)

[karanverma14122]

2017-27-01 - 17:08:54 : Searching for Device... Fail!
2017-27-01 - 17:08:54 : Please Select Comport For this Job.
2017-27-01 - 17:08:54 : Operation Time: 00:00:00
2017-27-01 - 17:08:57 : Searching for Device... Fail!
2017-27-01 - 17:08:57 : Please Select Comport For this Job.
2017-27-01 - 17:08:57 : Operation Time: 00:00:00
2017-27-01 - 17:09:01 : Searching for Device... OK
2017-27-01 - 17:09:01 : Prepairing Device on [COM80-Oppo Diagnostic Port ]... OK
2017-27-01 - 17:09:01 : Waiting for Phone ACK... OK
2017-27-01 - 17:09:02 : Reading Phone Information ...
2017-27-01 - 17:09:02 : Build No : MPSS.DPM.2.0.2.c1.10-00065-M8936FAAAANUZM-1.47395.1_VENDOR
2017-27-01 - 17:09:02 : IMEI 1 : 6606C9034721501
2017-27-01 - 17:09:02 : IMEI 2 : 362650060353091
2017-27-01 - 17:09:02 : Bypassing Security... OK..Fail!
2017-27-01 - 17:09:02 : Operation Time: 00:00:00
2017-27-01 - 17:09:10 : Read QCN Procedure Started...
2017-27-01 - 17:09:10 : Preparing... OK
2017-27-01 - 17:09:11 : Searching for Phone... OK
2017-27-01 - 17:09:11 : Preparing Phone on COM80-Oppo Diagnostic Port
2017-27-01 - 17:09:11 : Reading Phone Information ...
2017-27-01 - 17:09:11 : Build No : MPSS.DPM.2.0.2.c1.10-00065-M8936FAAAANUZM-1.47395.1_VENDOR
2017-27-01 - 17:09:11 : IMEI : 6606C9034721501
2017-27-01 - 17:09:11 : ESN : 00000000
2017-27-01 - 17:09:11 : Prepairing... OK..OK
2017-27-01 - 17:09:11 : Prepairing RFNV... OK
2017-27-01 - 17:09:14 : Retriving RFNV Items... OK
2017-27-01 - 17:09:32 : Reading RFNV Items Value... OK
2017-27-01 - 17:10:33 : Reading NV Items Value... OK
2017-27-01 - 17:12:20 : Reading NV SIM 1 Items Value... OK
2017-27-01 - 17:14:08 : Reading NV SIM 2 Items Value... OK
2017-27-01 - 17:15:14 : Retriving Provisioning Items... OK..OK..OK..OK
2017-27-01 - 17:15:14 : Read QCN Procedure Finished.
2017-27-01 - 17:15:16 : QCN File Created and Saved in:
2017-27-01 - 17:15:16 : 'C:\AHT2\BACKUP\HQCN\GENERIC_QUAL_QCN_1727_01_27-17_15_16.hqcn'
2017-27-01 - 17:15:36 : For Android 2.x.x:
2017-27-01 - 17:15:36 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-27-01 - 17:15:36 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-27-01 - 17:15:36 :
2017-27-01 - 17:15:36 : For Android 4.x.x and Above:
2017-27-01 - 17:15:36 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-27-01 - 17:15:36 : 2- Return to General Tab Tap on Developer Options
2017-27-01 - 17:15:36 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-27-01 - 17:15:36 :
2017-27-01 - 17:15:36 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-27-01 - 17:15:55 : Waiting For Device... OK[WinUSB]
2017-27-01 - 17:15:56 : Invalid Token Sign!
2017-27-01 - 17:15:56 : Stopping ADB Service... OK
2017-27-01 - 17:15:56 : Operation Time: 00:06:45
2017-27-01 - 17:23:22 : Read QCN Procedure Started...
2017-27-01 - 17:23:22 : Preparing... OK
2017-27-01 - 17:23:22 : Searching for Phone... OK
2017-27-01 - 17:23:22 : Preparing Phone on COM80-Oppo Diagnostic Port
2017-27-01 - 17:23:32 : Fail!
2017-27-01 - 17:23:32 : Phone Bad/Not Respond!
2017-27-01 - 17:23:32 : Read QCN Procedure Fail.
2017-27-01 - 17:24:52 : For Android 2.x.x:
2017-27-01 - 17:24:52 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-27-01 - 17:24:52 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-27-01 - 17:24:52 :
2017-27-01 - 17:24:52 : For Android 4.x.x and Above:
2017-27-01 - 17:24:52 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-27-01 - 17:24:52 : 2- Return to General Tab Tap on Developer Options
2017-27-01 - 17:24:52 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-27-01 - 17:24:52 :
2017-27-01 - 17:24:52 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-27-01 - 17:24:52 : Waiting For Device... OK[WinUSB]
2017-27-01 - 17:24:53 : Invalid Token Sign!
2017-27-01 - 17:24:53 : Stopping ADB Service... OK
2017-27-01 - 17:24:53 : Operation Time: 00:01:31
2017-27-01 - 17:25:00 : Read QCN Procedure Started...
2017-27-01 - 17:25:00 : Preparing... OK
2017-27-01 - 17:25:00 : Searching for Phone... OK
2017-27-01 - 17:25:00 : Preparing Phone on COM80-Oppo Diagnostic Port
2017-27-01 - 17:25:00 : Reading Phone Information ...
2017-27-01 - 17:25:00 : Build No : MPSS.DPM.2.0.2.c1.10-00065-M8936FAAAANUZM-1.47395.1_VENDOR
2017-27-01 - 17:25:00 : IMEI : 6606C9034721501
2017-27-01 - 17:25:00 : ESN : 00000000
2017-27-01 - 17:25:00 : Prepairing... OK..OK
2017-27-01 - 17:25:00 : Prepairing RFNV... OK
2017-27-01 - 17:25:03 : Retriving RFNV Items... OK
2017-27-01 - 17:25:17 : Reading RFNV Items Value... OK
2017-27-01 - 17:26:25 : Reading NV Items Value... OK
2017-27-01 - 17:28:08 : Reading NV SIM 1 Items Value... OK
2017-27-01 - 17:30:01 : Reading NV SIM 2 Items Value... OK
2017-27-01 - 17:31:02 : Retriving Provisioning Items... OK..OK..OK..OK
2017-27-01 - 17:31:02 : Read QCN Procedure Finished.
2017-27-01 - 17:31:05 : QCN File Created and Saved in:
2017-27-01 - 17:31:05 : 'C:\AHT2\BACKUP\HQCN\GENERIC_QUAL_QCN_1727_01_27-17_31_05.hqcn'
2017-27-01 - 17:31:30 : For Android 2.x.x:
2017-27-01 - 17:31:30 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-27-01 - 17:31:30 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-27-01 - 17:31:30 :
2017-27-01 - 17:31:30 : For Android 4.x.x and Above:
2017-27-01 - 17:31:30 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-27-01 - 17:31:30 : 2- Return to General Tab Tap on Developer Options
2017-27-01 - 17:31:30 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-27-01 - 17:31:30 :
2017-27-01 - 17:31:30 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-27-01 - 17:31:38 : Waiting For Device... OK[WinUSB]
2017-27-01 - 17:31:39 : Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
2017-27-01 - 17:31:41 : Device Status: [ONLINE]
2017-27-01 - 17:31:42 : Model : F1f
2017-27-01 - 17:31:42 : Manufacturer : F1f
2017-27-01 - 17:31:42 : Serial No. : 29555e3f
2017-27-01 - 17:31:42 : Baseband : msm

2017-27-01 - 17:31:42 : BaseBand Version : Q_V1_P14,Q_V1_P14

2017-27-01 - 17:31:42 : SW Version : F1fEX_11_160322

2017-27-01 - 17:31:42 : Custom Version :

2017-27-01 - 17:31:42 : Android Version : 5.1.1
[LMY47V
]
2017-27-01 - 17:31:42 : Built Date : Tue Mar 22 16:48:40 CST 2016

2017-27-01 - 17:31:53 : Checking Root Permission... OK
2017-27-01 - 17:32:35 : Prepairing Security... OK..OK..OK..OK
2017-27-01 - 17:33:12 : -----> Backup Security(1)... OK..OK..OK
2017-27-01 - 17:33:49 : -----> Backup Security(2)... OK..OK..OK
2017-27-01 - 17:34:27 : -----> Backup Security(3)... OK..OK..OK
2017-27-01 - 17:34:28 : SECURITY AREA Files Saved in :
2017-27-01 - 17:34:28 : C:\AHT2\BACKUP\SECURITY\F1f\2017_01_27__17_32_04\S EC_F1f.zip
2017-27-01 - 17:35:00 : Unlocking... OK..OK..OK
2017-27-01 - 17:35:00 : Rebooting to Normal Mode... OK
2017-27-01 - 17:35:00 :
2017-27-01 - 17:35:00 : Now in Tools Go 'Qualcomm > Unlock/IMEI' Select Method 2 and Write Your ORIGINAL IMEI to Phone
2017-27-01 - 17:35:00 : If Operations Going Wrong Restore Your QCN/SECURITY back up to Revive Your Phone.
2017-27-01 - 17:35:00 : Stopping ADB Service... OK
2017-27-01 - 17:35:00 : Operation Time: 00:10:00

[mobile_hotman]

I have 1 in hand let me try n post result..


BR

[Hua Supporter]

-backup qcn by hua and qpst
-backup sec by hua
-press unlock patch(unlock is done)
-repair imei now(if was 0000)

[Ahmed Zitoon]

Originally Posted by Hua Supporter

-backup qcn by hua and qpst
-backup sec by hua
-press unlock patch(unlock is done)
-repair imei now(if was 0000)

i can unlock zte qulcamm Z557 phone using this method !

[mobile_hotman]

Originally Posted by Hua Supporter

-backup qcn by hua and qpst
-backup sec by hua
-press unlock patch(unlock is done)
-repair imei now(if was 0000)

I Read Sec file HUA Box,,But Can't enter in FTM mode to read qcn file ??


BR

[Hua Supporter]

Originally Posted by mobile_hotman

I Read Sec file HUA Box,,But Can't enter in FTM mode to read qcn file ??


BR

You need enable diag port for read qcn

[mobile_hotman]

SECOND_IN_THE_FORUM_SUCCESSFULLY_UNLOCKED

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinUSB]
Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
Device Status: [ONLINE]
Model : F1f
Manufacturer : F1f
Serial No. : 856bd01f
Baseband : msm

BaseBand Version : Q_V1_P14,Q_V1_P14

SW Version : F1fEX_11_160318

Custom Version :

Android Version : 5.1.1
[LMY47V
]
Built Date : Fri Mar 18 13:18:31 CST 2016

Checking Root Permission... OK
Prepairing Security... OK..OK..OK..OK
-----> Backup Security(1)... OK..OK..OK
-----> Backup Security(2)... OK..OK..OK
-----> Backup Security(3)... OK..OK..OK
SECURITY AREA Files Saved in :
C:\AHT2\BACKUP\SECURITY\F1f\2017_02_08__23_18_33\S EC_F1f.zip
Unlocking... OK..OK..OK
Rebooting to Normal Mode... OK

PS: Remember I used EDL usb cable for All Process

Thanx HUA_TEAM Gr8 Box ..


BR

[goku_0729]

why is f1f unlock rooted "checking Root Permission... OK" what happen to NO NEED ROOT NOW.... ????

[Hua Supporter]

Originally Posted by goku_0729

why is f1f unlock rooted "checking Root Permission... OK" what happen to NO NEED ROOT NOW.... ????

press on unlock patch without root

[elf_ran2]

hi,

please share QCN FILE for oppo F1F need it badly,upload it to me please

[edisonsuen]

still havent figured out how to use best dongle with hua activation on it.. always have driver problem..

[Hua Supporter]

still havent figured out how to use best dongle with hua activation on it.. always have driver problem..

buy a blue reader for fix this problem.