zte a460 after patch unlock no imei - GSM-Forum

querro59 · 10-12-2017, 22:16

hi huabox team i have zte a460 . thus problem is imei null after patch unlock

i have backup of qcn and security
log

Quote:

2017-05-10 - 16:07:23 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-05-10 - 16:07:23 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-05-10 - 16:07:23 :
2017-05-10 - 16:07:23 : For Android 4.x.x and Above:
2017-05-10 - 16:07:23 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-05-10 - 16:07:23 : 2- Return to General Tab Tap on Developer Options
2017-05-10 - 16:07:23 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-05-10 - 16:07:23 :
2017-05-10 - 16:07:23 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-05-10 - 16:07:23 : Waiting For Device... OK[WinUSB]
2017-05-10 - 16:07:25 : Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
2017-05-10 - 16:07:28 : Device Status: [ONLINE]
2017-05-10 - 16:07:38 : Checking Root Permission... OK
2017-05-10 - 16:07:48 : Updating USB Diag Mode... OK
2017-05-10 - 16:07:48 : Operation Time: 00:00:25
2017-05-10 - 16:08:02 : Read QCN Procedure Started...
2017-05-10 - 16:08:02 : Preparing... OK
2017-05-10 - 16:08:02 : Searching for Phone... OK
2017-05-10 - 16:08:02 : Preparing Phone on COM68-ZTE Handset Diagnostic Interface
2017-05-10 - 16:08:02 : Reading Phone Information ...
2017-05-10 - 16:08:02 : Build No : A460_B15_r14179_150914
2017-05-10 - 16:08:02 : IMEI : 6673700227523E1
2017-05-10 - 16:08:02 : ESN : 00000000
2017-05-10 - 16:08:02 : Prepairing... OK..OK
2017-05-10 - 16:08:02 : Prepairing RFNV... OK
2017-05-10 - 16:08:04 : Retriving RFNV Items... OK
2017-05-10 - 16:08:12 : Reading RFNV Items Value... OK
2017-05-10 - 16:08:52 : Reading NV Items Value... OK
2017-05-10 - 16:09:58 : Reading NV SIM 1 Items Value... OK
2017-05-10 - 16:11:05 : Reading NV SIM 2 Items Value... OK
2017-05-10 - 16:12:04 : Retriving Provisioning Items... OK..OK..OK..OK
2017-05-10 - 16:12:04 : Read QCN Procedure Finished.
2017-05-10 - 16:12:06 : QCN File Created and Saved in:
2017-05-10 - 16:12:06 : 'C:\AHT2\BACKUP\HQCN\HUA_QCN_17278_10_05-16_12_06.hqcn'
2017-05-10 - 16:12:06 : Restart Your Phone.
2017-05-10 - 16:12:06 : Operation Time: 00:04:04
2017-05-10 - 16:12:57 : Read QCN Procedure Started...
2017-05-10 - 16:12:57 : Preparing... OK
2017-05-10 - 16:12:57 : Searching for Phone... OK
2017-05-10 - 16:12:57 : Preparing Phone on COM68-ZTE Handset Diagnostic Interface
2017-05-10 - 16:12:58 : Reading Phone Information ...
2017-05-10 - 16:12:58 : Build No : A460_B15_r14179_150914
2017-05-10 - 16:12:58 : IMEI : 6673700227523E1
2017-05-10 - 16:12:58 : ESN : 00000000
2017-05-10 - 16:12:58 : Prepairing... Fail!
2017-05-10 - 16:12:58 : Size Mismatch!
2017-05-10 - 16:12:58 : Read QCN Procedure Fail.
2017-05-10 - 16:14:46 : For Android 2.x.x:
2017-05-10 - 16:14:46 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-05-10 - 16:14:46 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-05-10 - 16:14:46 :
2017-05-10 - 16:14:46 : For Android 4.x.x and Above:
2017-05-10 - 16:14:46 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-05-10 - 16:14:46 : 2- Return to General Tab Tap on Developer Options
2017-05-10 - 16:14:46 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-05-10 - 16:14:46 :
2017-05-10 - 16:14:46 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-05-10 - 16:14:46 : Waiting For Device... OK[WinUSB]
2017-05-10 - 16:14:46 : Error(1)!
2017-05-10 - 16:14:46 : Stopping ADB Service... OK
2017-05-10 - 16:14:46 : Operation Time: 00:01:48
2017-05-10 - 16:14:56 : Read QCN Procedure Started...
2017-05-10 - 16:14:56 : Preparing... OK
2017-05-10 - 16:14:56 : Searching for Phone... OK
2017-05-10 - 16:14:56 : Preparing Phone on COM68-ZTE Handset Diagnostic Interface
2017-05-10 - 16:14:57 : Reading Phone Information ...
2017-05-10 - 16:14:57 : Build No : A460_B15_r14179_150914
2017-05-10 - 16:14:57 : IMEI : 6673700227523E1
2017-05-10 - 16:14:57 : ESN : 00000000
2017-05-10 - 16:14:57 : Prepairing... OK..OK
2017-05-10 - 16:14:57 : Prepairing RFNV... OK
2017-05-10 - 16:14:59 : Retriving RFNV Items... OK
2017-05-10 - 16:15:07 : Reading RFNV Items Value... OK
2017-05-10 - 16:15:49 : Reading NV Items Value... OK
2017-05-10 - 16:16:58 : Reading NV SIM 1 Items Value... OK
2017-05-10 - 16:18:08 : Reading NV SIM 2 Items Value... OK
2017-05-10 - 16:18:53 : Retriving Provisioning Items... OK..OK..OK..OK
2017-05-10 - 16:18:53 : Read QCN Procedure Finished.
2017-05-10 - 16:18:55 : QCN File Created and Saved in:
2017-05-10 - 16:18:55 : 'C:\AHT2\BACKUP\HQCN\GENERIC_QUAL_QCN_17278_10_05-16_18_55.hqcn'
2017-05-10 - 16:19:06 : For Android 2.x.x:
2017-05-10 - 16:19:06 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-05-10 - 16:19:06 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-05-10 - 16:19:06 :
2017-05-10 - 16:19:06 : For Android 4.x.x and Above:
2017-05-10 - 16:19:06 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-05-10 - 16:19:06 : 2- Return to General Tab Tap on Developer Options
2017-05-10 - 16:19:06 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-05-10 - 16:19:06 :
2017-05-10 - 16:19:06 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-05-10 - 16:19:06 : Waiting For Device... OK[WinUSB]
2017-05-10 - 16:19:07 : Invalid Token Sign!
2017-05-10 - 16:19:07 : Stopping ADB Service... OK
2017-05-10 - 16:19:07 : Operation Time: 00:04:11
2017-05-10 - 16:19:45 : Operation Time: 00:00:07
2017-05-10 - 16:19:51 : Searching for Device... OK
2017-05-10 - 16:19:51 : Prepairing Device on [COM68-ZTE Handset Diagnostic Interface ]... OK
2017-05-10 - 16:19:51 : Waiting for Phone ACK... OK
2017-05-10 - 16:19:51 : Reading Phone Information ...
2017-05-10 - 16:19:51 : Build No : A460_B15_r14179_150914
2017-05-10 - 16:19:52 : IMEI 1 : 6673700227523E1
2017-05-10 - 16:19:52 : IMEI 2 : 000000000000000
2017-05-10 - 16:19:52 : Bypassing Security... OK..Fail!
2017-05-10 - 16:19:52 : Operation Time: 00:00:03
2017-05-10 - 16:20:03 : Read QCN Procedure Started...
2017-05-10 - 16:20:03 : Preparing... OK
2017-05-10 - 16:20:03 : Searching for Phone... OK
2017-05-10 - 16:20:03 : Preparing Phone on COM68-ZTE Handset Diagnostic Interface
2017-05-10 - 16:20:04 : Reading Phone Information ...
2017-05-10 - 16:20:04 : Build No : A460_B15_r14179_150914
2017-05-10 - 16:20:04 : IMEI : 6673700227523E1
2017-05-10 - 16:20:04 : ESN : 00000000
2017-05-10 - 16:20:04 : Prepairing... Fail!
2017-05-10 - 16:20:04 : Size Mismatch!
2017-05-10 - 16:20:04 : Read QCN Procedure Fail.
2017-05-10 - 16:20:11 : For Android 2.x.x:
2017-05-10 - 16:20:11 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-05-10 - 16:20:11 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-05-10 - 16:20:11 :
2017-05-10 - 16:20:11 : For Android 4.x.x and Above:
2017-05-10 - 16:20:11 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-05-10 - 16:20:11 : 2- Return to General Tab Tap on Developer Options
2017-05-10 - 16:20:11 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-05-10 - 16:20:11 :
2017-05-10 - 16:20:11 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-05-10 - 16:20:11 : Waiting For Device... OK[WinUSB]
2017-05-10 - 16:20:12 : Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
2017-05-10 - 16:20:15 : Device Status: [ONLINE]
2017-05-10 - 16:20:16 : Model : Blade A460
2017-05-10 - 16:20:16 : Manufacturer : Blade A460
2017-05-10 - 16:20:16 : Serial No. : f5e9ce01
2017-05-10 - 16:20:16 : Baseband : msm

2017-05-10 - 16:20:16 : BaseBand Version : A460_B15_r14179_150914

2017-05-10 - 16:20:16 : SW Version : CLA-CL-P809A20V1.0.1

2017-05-10 - 16:20:16 : Custom Version :

2017-05-10 - 16:20:16 : Android Version : 5.1.1
[LMY47V
]
2017-05-10 - 16:20:17 : Built Date : Mon Sep 14 15:05:05 CST 2015

2017-05-10 - 16:20:27 : Checking Root Permission... OK
2017-05-10 - 16:21:09 : Prepairing Security... OK..OK..OK..OK
2017-05-10 - 16:21:47 : -----> Backup Security(1)... OK..OK..OK
2017-05-10 - 16:22:25 : -----> Backup Security(2)... OK..OK..OK
2017-05-10 - 16:23:03 : -----> Backup Security(3)... OK..OK..OK
2017-05-10 - 16:23:03 : SECURITY AREA Files Saved in :
2017-05-10 - 16:23:03 : C:\AHT2\BACKUP\SECURITY\Blade A460\2017_10_05__16_20_37\SEC_Blade A460.zip
2017-05-10 - 16:23:34 : Unlocking... OK..OK..OK
2017-05-10 - 16:23:34 : Rebooting to Normal Mode... OK
2017-05-10 - 16:23:34 :
2017-05-10 - 16:23:34 : Now in Tools Go 'Qualcomm > Unlock/IMEI' Select Method 2 and Write Your ORIGINAL IMEI to Phone
2017-05-10 - 16:23:34 : If Operations Going Wrong Restore Your QCN/SECURITY back up to Revive Your Phone.
2017-05-10 - 16:23:34 : Stopping ADB Service... OK
2017-05-10 - 16:23:34 : Operation Time: 00:03:31
2017-05-10 - 16:34:09 : Please Select QCN File!
2017-05-10 - 16:34:09 : Operation Time: 00:-11:-35
2017-05-10 - 16:34:46 : Extracting QCN... OK.OK
2017-05-10 - 16:34:46 :
2017-05-10 - 16:34:46 : ----------------
2017-05-10 - 16:34:46 : QCN File info:
2017-05-10 - 16:34:46 : ----------------
2017-05-10 - 16:34:46 : IMEI: 6673700227523E1
2017-05-10 - 16:34:46 : BUILD No.: A460_B15_r14179_150914
2017-05-10 - 16:34:46 : ESN: 00000000
2017-05-10 - 16:34:46 : Total NVM Item Count: 1262
2017-05-10 - 16:34:46 : -----------------------------------------------------------------------------------------------------------------
2017-05-10 - 16:34:52 : Write QCN Procedure Started...
2017-05-10 - 16:34:52 : Searching for Phone ...OK
2017-05-10 - 16:34:52 : Preparing Phone on COM68
2017-05-10 - 16:34:54 : Reading Phone Information ...
2017-05-10 - 16:34:54 : Build No : A460_B15_r14179_150914
2017-05-10 - 16:34:54 : IMEI : 000000000000000
2017-05-10 - 16:34:54 : ESN : 00000000
2017-05-10 - 16:36:01 : For Android 2.x.x:
2017-05-10 - 16:36:01 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-05-10 - 16:36:01 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-05-10 - 16:36:01 :
2017-05-10 - 16:36:01 : For Android 4.x.x and Above:
2017-05-10 - 16:36:01 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-05-10 - 16:36:01 : 2- Return to General Tab Tap on Developer Options
2017-05-10 - 16:36:01 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-05-10 - 16:36:01 :
2017-05-10 - 16:36:01 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-05-10 - 16:36:01 : Waiting For Device... OK[WinUSB]
2017-05-10 - 16:36:02 : Invalid Token Sign!
2017-05-10 - 16:36:02 : Stopping ADB Service... OK
2017-05-10 - 16:36:02 : Operation Time: 00:00:08
2017-05-10 - 16:36:15 : For Android 2.x.x:
2017-05-10 - 16:36:15 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-05-10 - 16:36:15 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-05-10 - 16:36:15 :
2017-05-10 - 16:36:15 : For Android 4.x.x and Above:
2017-05-10 - 16:36:15 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-05-10 - 16:36:15 : 2- Return to General Tab Tap on Developer Options
2017-05-10 - 16:36:15 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-05-10 - 16:36:15 :
2017-05-10 - 16:36:15 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-05-10 - 16:36:15 : Waiting For Device... OK[WinUSB]
2017-05-10 - 16:36:17 : Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
2017-05-10 - 16:36:20 : Device Status: [ONLINE]
2017-05-10 - 16:36:20 : Model : Blade A460
2017-05-10 - 16:36:20 : Manufacturer : Blade A460
2017-05-10 - 16:36:20 : Serial No. : f5e9ce01
2017-05-10 - 16:36:20 : Baseband : msm

2017-05-10 - 16:36:21 : BaseBand Version :

2017-05-10 - 16:36:21 : SW Version : CLA-CL-P809A20V1.0.1

2017-05-10 - 16:36:21 : Custom Version :

2017-05-10 - 16:36:21 : Android Version : 5.1.1
[LMY47V
]
2017-05-10 - 16:36:21 : Built Date : Mon Sep 14 15:05:05 CST 2015

2017-05-10 - 16:36:31 : Checking Root Permission... OK
2017-05-10 - 16:36:52 : Prepairing Security File 1... OK..OK
2017-05-10 - 16:37:27 : Restoring Security File 1... OK..OK..OK
2017-05-10 - 16:37:48 : Prepairing Security File 2... OK..OK
2017-05-10 - 16:38:23 : Restoring Security File 2... OK..OK..OK
2017-05-10 - 16:38:43 : Rebooting to Normal Mode... OK
2017-05-10 - 16:38:43 : Stopping ADB Service... OK
2017-05-10 - 16:38:43 : Operation Time: 00:02:29
2017-05-10 - 17:15:46 : Extracting QCN... OK.OK
2017-05-10 - 17:15:46 :
2017-05-10 - 17:15:46 : ----------------
2017-05-10 - 17:15:46 : QCN File info:
2017-05-10 - 17:15:46 : ----------------
2017-05-10 - 17:15:46 : IMEI: 6673700227523E1
2017-05-10 - 17:15:46 : BUILD No.: A460_B15_r14179_150914
2017-05-10 - 17:15:46 : ESN: 00000000
2017-05-10 - 17:15:46 : Total NVM Item Count: 1262
2017-05-10 - 17:15:46 : -----------------------------------------------------------------------------------------------------------------
2017-05-10 - 17:15:51 : Write QCN Procedure Started...
2017-05-10 - 17:15:51 : Searching for Phone ...OK
2017-05-10 - 17:15:51 : Preparing Phone on COM68
2017-05-10 - 17:15:52 : Reading Phone Information ...
2017-05-10 - 17:15:52 : Build No : A460_B15_r14179_150914
2017-05-10 - 17:15:52 : IMEI : 454545467CDCD09
2017-05-10 - 17:15:52 : ESN : 00000000
2017-05-10 - 17:16:15 : Operation Canceled By User!
2017-05-10 - 17:16:15 : Restart Your Phone.
2017-05-10 - 17:16:15 : Operation Time: -07:-478:-53
2017-05-10 - 17:16:34 : Searching for Device... OK
2017-05-10 - 17:16:34 : Prepairing Device on [COM68-ZTE Handset Diagnostic Interface ]... OK
2017-05-10 - 17:16:35 : Waiting for Phone ACK... OK
2017-05-10 - 17:16:35 : Reading Phone Information ...
2017-05-10 - 17:16:35 : Build No : A460_B15_r14179_150914
2017-05-10 - 17:16:35 : IMEI 1 : 454545467CDCD09
2017-05-10 - 17:16:35 : IMEI 2 : 000000000000000
2017-05-10 - 17:16:35 : Bypassing Security... OK..Fail!
2017-05-10 - 17:16:35 : Operation Time: 00:00:00
2017-05-10 - 17:16:51 : For Android 2.x.x:
2017-05-10 - 17:16:51 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-05-10 - 17:16:51 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-05-10 - 17:16:51 :
2017-05-10 - 17:16:51 : For Android 4.x.x and Above:
2017-05-10 - 17:16:51 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-05-10 - 17:16:51 : 2- Return to General Tab Tap on Developer Options
2017-05-10 - 17:16:51 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-05-10 - 17:16:51 :
2017-05-10 - 17:16:51 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-05-10 - 17:16:51 : Waiting For Device... OK[WinUSB]
2017-05-10 - 17:16:52 : Invalid Token Sign!
2017-05-10 - 17:16:52 : Stopping ADB Service... OK
2017-05-10 - 17:16:52 : Operation Time: 00:00:01
2017-05-10 - 17:16:56 : For Android 2.x.x:
2017-05-10 - 17:16:56 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-05-10 - 17:16:56 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-05-10 - 17:16:56 :
2017-05-10 - 17:16:56 : For Android 4.x.x and Above:
2017-05-10 - 17:16:56 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-05-10 - 17:16:56 : 2- Return to General Tab Tap on Developer Options
2017-05-10 - 17:16:56 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-05-10 - 17:16:56 :
2017-05-10 - 17:16:56 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-05-10 - 17:16:56 : Waiting For Device... OK[WinUSB]
2017-05-10 - 17:16:57 : Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
2017-05-10 - 17:17:00 : Device Status: [ONLINE]
2017-05-10 - 17:17:00 : Model : Blade A460
2017-05-10 - 17:17:00 : Manufacturer : Blade A460
2017-05-10 - 17:17:00 : Serial No. : f5e9ce01
2017-05-10 - 17:17:00 : Baseband : msm

2017-05-10 - 17:17:00 : BaseBand Version :

2017-05-10 - 17:17:01 : SW Version : CLA-CL-P809A20V1.0.1

2017-05-10 - 17:17:01 : Custom Version :

2017-05-10 - 17:17:01 : Android Version : 5.1.1
[LMY47V
]
2017-05-10 - 17:17:01 : Built Date : Mon Sep 14 15:05:05 CST 2015

2017-05-10 - 17:17:11 : Checking Root Permission... Fail(0)
2017-05-10 - 17:17:11 : Please Root Your Phone! (Err:0)
2017-05-10 - 17:17:11 : Stopping ADB Service... OK
2017-05-10 - 17:17:11 : Operation Time: 00:00:15
2017-05-10 - 17:17:35 : For Android 2.x.x:
2017-05-10 - 17:17:35 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-05-10 - 17:17:35 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-05-10 - 17:17:35 :
2017-05-10 - 17:17:35 : For Android 4.x.x and Above:
2017-05-10 - 17:17:35 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-05-10 - 17:17:35 : 2- Return to General Tab Tap on Developer Options
2017-05-10 - 17:17:35 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-05-10 - 17:17:35 :
2017-05-10 - 17:17:35 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-05-10 - 17:17:35 : Waiting For Device... OK[WinUSB]
2017-05-10 - 17:17:37 : Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
2017-05-10 - 17:17:40 : Device Status: [ONLINE]
2017-05-10 - 17:17:40 : Model : Blade A460
2017-05-10 - 17:17:40 : Manufacturer : Blade A460
2017-05-10 - 17:17:40 : Serial No. : f5e9ce01
2017-05-10 - 17:17:41 : Baseband : msm

2017-05-10 - 17:17:41 : BaseBand Version :

2017-05-10 - 17:17:41 : SW Version : CLA-CL-P809A20V1.0.1

2017-05-10 - 17:17:41 : Custom Version :

2017-05-10 - 17:17:41 : Android Version : 5.1.1
[LMY47V
]
2017-05-10 - 17:17:41 : Built Date : Mon Sep 14 15:05:05 CST 2015

2017-05-10 - 17:17:51 : Checking Root Permission... Fail(0)
2017-05-10 - 17:17:51 : Please Root Your Phone! (Err:0)
2017-05-10 - 17:17:52 : Stopping ADB Service... OK
2017-05-10 - 17:17:52 : Operation Time: 00:00:16
2017-05-10 - 17:19:57 : For Android 2.x.x:
2017-05-10 - 17:19:57 : 1- Turn-on the Phone Goto 'Settings > Application > Development'
2017-05-10 - 17:19:57 : 2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone
2017-05-10 - 17:19:57 :
2017-05-10 - 17:19:57 : For Android 4.x.x and Above:
2017-05-10 - 17:19:57 : 1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2017-05-10 - 17:19:57 : 2- Return to General Tab Tap on Developer Options
2017-05-10 - 17:19:57 : 3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone
2017-05-10 - 17:19:57 :
2017-05-10 - 17:19:57 : IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
2017-05-10 - 17:19:57 : Waiting For Device... OK[WinUSB]
2017-05-10 - 17:19:58 : Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
2017-05-10 - 17:20:01 : Device Status: [ONLINE]
2017-05-10 - 17:20:01 : Model : Blade A460
2017-05-10 - 17:20:02 : Manufacturer : Blade A460
2017-05-10 - 17:20:02 : Serial No. : f5e9ce01
2017-05-10 - 17:20:02 : Baseband : msm

2017-05-10 - 17:20:02 : BaseBand Version :

2017-05-10 - 17:20:02 : SW Version : CLA-CL-P809A20V1.0.1

2017-05-10 - 17:20:02 : Custom Version :

2017-05-10 - 17:20:02 : Android Version : 5.1.1
[LMY47V
]
2017-05-10 - 17:20:02 : Built Date : Mon Sep 14 15:05:05 CST 2015

2017-05-10 - 17:20:13 : Checking Root Permission... OK
2017-05-10 - 17:20:34 : Prepairing Security... OK..OK..OK..OK
2017-05-10 - 17:20:55 : Resetting Security... OK..OK
2017-05-10 - 17:20:55 : Rebooting to Normal Mode... OK
2017-05-10 - 17:20:55 : Stopping ADB Service... OK
2017-05-10 - 17:20:55 : Operation Time: 00:00:58
2017-05-10 - 17:31:45 : Searching for Device... OK
2017-05-10 - 17:31:45 : Prepairing Device on [Qualcomm HS-USB QDLoader 9008 (COM69)]... OK
2017-05-10 - 17:31:45 : Waiting for Phone ACK... OK
2017-05-10 - 17:31:45 : Serial Number: 0054026B
2017-05-10 - 17:31:45 : CPU ID: 009600E100000000 | Type: MSM8909 Snapdragon 210/212
2017-05-10 - 17:31:45 : SBL Ver: 00000000
2017-05-10 - 17:31:45 : OEM Key(PK): 3767512BCB320B2B8450BAB3FCC7D891D913702CBA941717D6 D13AF81FDADC68
2017-05-10 - 17:31:47 : Changing Mode to SAHARA... OK
2017-05-10 - 17:31:47 : Prepairing... OK -> [0000000D][00000000:00000034]
2017-05-10 - 17:32:55 : Sending Loader... Fail!
2017-05-10 - 17:32:56 : Stop Signal Detected!
2017-05-10 - 17:32:56 : Procedure Stopped By User Request
2017-05-10 - 17:32:56 : Connection terminated.
2017-05-10 - 17:32:56 : Connection terminated.
2017-05-10 - 17:34:09 : Extracting QCN... OK.OK
2017-05-10 - 17:34:09 :
2017-05-10 - 17:34:09 : ----------------
2017-05-10 - 17:34:10 : QCN File info:
2017-05-10 - 17:34:10 : ----------------
2017-05-10 - 17:34:10 : IMEI: 6673700227523E1
2017-05-10 - 17:34:10 : BUILD No.: A460_B15_r14179_150914
2017-05-10 - 17:34:10 : ESN: 00000000
2017-05-10 - 17:34:10 : Total NVM Item Count: 1262
2017-05-10 - 17:34:10 : -----------------------------------------------------------------------------------------------------------------
2017-05-10 - 17:34:23 : Write QCN Procedure Started...
2017-05-10 - 17:34:23 : Searching for Phone ...OK
2017-05-10 - 17:34:23 : Preparing Phone on COM68
2017-05-10 - 17:34:25 : Reading Phone Information ...
2017-05-10 - 17:34:25 : Build No : A460_B15_r14179_150914
2017-05-10 - 17:34:25 : IMEI : 000000000000000
2017-05-10 - 17:34:25 : ESN : 00000000
2017-05-10 - 17:36:27 : ZTE Method Tip:
2017-05-10 - 17:36:27 : Dial *#7678# then Select Factory Port
2017-05-10 - 17:36:29 : Searching for Phone ...OK
2017-05-10 - 17:36:29 : Preparing Phone on COM68-ZTE Handset Diagnostic Interface
2017-05-10 - 17:36:32 : Reading Phone Information ...
2017-05-10 - 17:36:32 : Build No : A460_B15_r14179_150914
2017-05-10 - 17:36:32 : IMEI : 000000000000000
2017-05-10 - 17:36:32 : ESN : 00000000
2017-05-10 - 17:36:32 : Writing IMEI1... OK
2017-05-10 - 17:36:32 : Writing IMEI2... OK
2017-05-10 - 17:36:32 :
2017-05-10 - 17:36:32 : If Phone Not Restart Do it Manualy and Please Note: !!DONT REMOVE BATTERY!!
2017-05-10 - 17:36:32 : Operation Time: 00:00:03
2017-05-10 - 17:41:03 : Extracting QCN... OK.OK
2017-05-10 - 17:41:03 :
2017-05-10 - 17:41:03 : ----------------
2017-05-10 - 17:41:03 : QCN File info:
2017-05-10 - 17:41:03 : ----------------
2017-05-10 - 17:41:03 : IMEI: 6673700227523E1
2017-05-10 - 17:41:03 : BUILD No.: A460_B15_r14179_150914
2017-05-10 - 17:41:03 : ESN: 00000000
2017-05-10 - 17:41:03 : Total NVM Item Count: 1262
2017-05-10 - 17:41:03 : -----------------------------------------------------------------------------------------------------------------
2017-05-10 - 17:41:05 : Write QCN Procedure Started...
2017-05-10 - 17:41:05 : Searching for Phone ...OK
2017-05-10 - 17:41:05 : Preparing Phone on COM68
2017-05-10 - 17:41:06 : Reading Phone Information ...
2017-05-10 - 17:41:06 : Build No : A460_B15_r14179_150914
2017-05-10 - 17:41:06 : IMEI : 000000000000000
2017-05-10 - 17:41:06 : ESN : 00000000

Hua Supporter · 10-12-2017, 22:41

restore qcn by qpst
http://forum.gsmhosting.com/vbb/12256501-post24.html

querro59 · 10-12-2017, 23:01

i have only qcn backup from huabox....hqcn no compatible with qpst...

Hua Supporter · 10-12-2017, 23:03

you need restore qcn by qpst for fix too

read my manuals
http://forum.gsmhosting.com/vbb/12256501-post24.html

querro59 · 10-12-2017, 23:27

what is the utility of reading qcn with huabox?........thanks see you

Hua Supporter · 10-12-2017, 23:28

Quote:

what is the utility of reading qcn

hqcn is just for read security.
http://forum.gsmhosting.com/vbb/f930...nlock-2274631/

10-12-2017, 22:41	#2 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	restore qcn by qpst http://forum.gsmhosting.com/vbb/12256501-post24.html

10-12-2017, 23:01	#3 (permalink)
querro59 Freak Poster Join Date: Apr 2008 Posts: 134 Member: 762794 Status: Offline Thanks Meter: 14	i have only qcn backup from huabox....hqcn no compatible with qpst...

10-12-2017, 23:03	#4 (permalink)
Hua Supporter Product Supporter Join Date: May 2014 Location: IRAN Posts: 11,088 Member: 2179353 Status: Offline Thanks Meter: 17,022	you need restore qcn by qpst for fix too read my manuals http://forum.gsmhosting.com/vbb/12256501-post24.html

10-12-2017, 23:27	#5 (permalink)
querro59 Freak Poster Join Date: Apr 2008 Posts: 134 Member: 762794 Status: Offline Thanks Meter: 14	what is the utility of reading qcn with huabox?........thanks see you