qmobile S2 flash file - GSM-Forum

basitnazeer · 09-26-2019, 14:49

Code:

Qmobile S2 Flash File MT6580 100% Tested Firmware Downloads Free

By modernmobile42.
Qmobile S2 Official Firmware Free And Easy Download.Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6580
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6580_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A48384731650507FCA1B4EC928F
DA Stat : v4.2 on BBID : 0x94
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A48384731650507FCA1B4EC928F
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : QMobile
ProdName : QMobile S2
ProdModel : QMobile S2
Device : QMobile
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_TINNO6580.WE.L_P4

[Read Ok] : preloader_s5250.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / s5250 / EMMC
FW Size : 1704 MiB
Scatter saved to : O:\New Folder\MT6580__QMobile__QMobile_S2__QMobile__5.1__ ALPS.L1.MP6.V2_TINNO6580.WE.L_P4\

All done!

Done!
Elapsed: 00:08:34
Reconnect Power/Cable!
All Flash File Downloads Free 100% ok Flash File.

Download

09-26-2019, 14:49	#1 (permalink)
basitnazeer Freak Poster Join Date: Feb 2018 Location: bahawalpur Posts: 155 Member: 2809413 Status: Offline Sonork: CharlesMaind Thanks Meter: 26	qmobile S2 flash file Code: Qmobile S2 Flash File MT6580 100% Tested Firmware Downloads Free By modernmobile42. Qmobile S2 Official Firmware Free And Easy Download.Operation : Read Flash [ v1.40 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 8 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6580 BB_CPU_HW : CA00 BB_CPU_SW : 8A00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6580_S00 Processing BROM stage SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v5.1540.01.01 NAND_ID : 00000000000000000000000000000000 eMMC_ID : 90014A48384731650507FCA1B4EC928F DA Stat : v4.2 on BBID : 0x94 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0090 , OEM : 014A [eMMC] : FLASH_INF : [HYNIX] , e1G8 [eMMC] : FLASH_CID : 90014A48384731650507FCA1B4EC928F [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x00000001D2000000 [eMMC] : FLASH_UCP : 7456 MiB INT RAM : 0x00020000 EXT RAM : 0x40000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Conent now ... Brand : QMobile ProdName : QMobile S2 ProdModel : QMobile S2 Device : QMobile AndroidVer: 5.1 MTKxCPU : MT6580 MTKxPRJ : ALPS.L1.MP6.V2_TINNO6580.WE.L_P4 [Read Ok] : preloader_s5250.bin [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : logo.bin [Read Ok] : secro.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6580 / V1.1.2 / s5250 / EMMC FW Size : 1704 MiB Scatter saved to : O:\New Folder\MT6580__QMobile__QMobile_S2__QMobile__5.1__ ALPS.L1.MP6.V2_TINNO6580.WE.L_P4\ All done! Done! Elapsed: 00:08:34 Reconnect Power/Cable! All Flash File Downloads Free 100% ok Flash File. Download