Word Ist SPD Andorid G Five President Shark 1 Read/Format/Write By Merapi Tool - GSM-Forum

FullFlashPak · 06-13-2015, 11:32

World Ist Spd Andorid 8810/6820 Gfive President Shark 1 Read Firmware ,Format & Write Firmware with Bin File No Face Any Issue.
Like....
During Read FlashFile Phone Dead Or After Read Flash File Phone Dead,
After Format Phone Dead Or Hang On Logo. Or Phone Restar Problem.
After Write Firmware Phone Dead Or Hang On Logo Etc Etc.

Reall Very Safe Working All Opation Like Read Flashfile.Format, Write Firmware ,

Format, Reall Its Working Magic No Face Any Problem After Format.
Phone Working Very well Same Like Before. No hang or restar problem or Dead Problem Face.

Other XYZ Have This Power ,Becasue Its Merapi Magic Tool

Info Logs,

Code:

13:41:01 > Internal version: SPRD3
>>Boot downloaded.
 13:41:01 > Start boot please wait a moment....
 13:41:03 > Spreadtrum Boot Block version 1.1
>>Boot downloaded.
 13:41:04 > CPU TYPE:SC8810/6820 [88100001]
 13:41:04 > Flash ID: 00AD00BC90555400
 13:41:04 > Flash Type:[Hyundai] NAND_HY27UT088G2A
 13:41:04 > FLASH LEN:0x20000000
 13:41:04 > 
>>mtdparts=sprd-nand:256k(spl),1m(2ndbl),256k(params),1m(vmjaluna),9m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),207m(system),173m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic),512k(simlock),10m(intmemory)
>>Analysis flash internal data fail.

Read Flash File Logs,

Code:

>>Analysis of USB port,Please insert phone USB cable.
 13:43:29 > 
 13:43:29 > Internal version: SPRD3
>>Boot downloaded.
 13:43:29 > Start boot please wait a moment....
 13:43:31 > Spreadtrum Boot Block version 1.1
>>Boot downloaded.
>>Boot downloaded.
 13:43:33 > Flash ID: 00AD00BC9055
 13:43:33 > Flash Type:[Hyundai] NAND_HY27UT088G2A
 13:43:33 > FLASH LEN:0x20000000
 13:43:33 > 
>>Reading completed.
 14:20:12 > Read time: 36 min 39 s

Format Logs,

Code:

>Analysis of USB port,Please insert phone USB cable.
 14:27:05 > 
 14:27:05 > Internal version: SPRD3
>>Boot downloaded.
 14:27:05 > Start boot please wait a moment....
 14:27:07 > Spreadtrum Boot Block version 1.1
>>Boot downloaded.
>>Boot downloaded.
 14:27:09 > Flash ID: 00AD00BC9055
 14:27:09 > Flash Type:[Hyundai] NAND_HY27UT088G2A
 14:27:09 > FLASH LEN:0x20000000
 14:27:09 > 
>>Set to Factory successfully.

Write Firmware Logs

Code:

 >>Analysis of USB port,Please insert phone USB cable.
 14:45:58 > 
 14:45:58 > Internal version: SPRD3
>>Boot downloaded.
 14:45:59 > Start boot please wait a moment....
 14:46:01 > Spreadtrum Boot Block version 1.1
>>Boot downloaded.
>>Boot downloaded.
 14:46:02 > Flash ID: 00AD00BC9055
 14:46:02 > Flash Type:[Hyundai] NAND_HY27UT088G2A
 14:46:02 > FLASH LEN:0x20000000
 14:46:02 > 
>>Erase flash complete.
>>Writing completed.

Regard
FullFlashPak

KYEJUSA · 06-13-2015, 15:34

When release this update

moh_boulk17 · 06-13-2015, 17:40

how format work with u look here

>>Analysis flash internal data fail. ????????????????

FullFlashPak · 06-14-2015, 06:01

Quote:

Originally Posted by moh_boulk17

how format work with u look here

>>Analysis flash internal data fail. ????????????????

brother chack phone info . not a format short.

Nasir Mobiles · 06-14-2015, 08:58

I know the time ppl hide their serial numbers and there is a known reason
but I just cant understand is that why you are hiding version of your exe
if u got a different version then why you showing reports with us ???
We dont have the version which one you have then simply we cant repair like u do.
and reports are not movie or dramas watch and enjoy.w'll enjoy doing on own pc.
beta tester is now long story.

anyways if it concerns to beta why you are hiding 1.2.3B etc?

PS: to Product supporter this is not your fault but the man who allow you to do this.

wBw,
Lover of Volcano Box

FullFlashPak · 06-14-2015, 10:21

Quote:

Originally Posted by Nasir Mobiles

I know the time ppl hide their serial numbers and there is a known reason
but I just cant understand is that why you are hiding version of your exe
if u got a different version then why you showing reports with us ???
We dont have the version which one you have then simply we cant repair like u do.
and reports are not movie or dramas watch and enjoy.w'll enjoy doing on own pc.
beta tester is now long story.

anyways if it concerns to beta why you are hiding 1.2.3B etc?

PS: to Product supporter this is not your fault but the man who allow you to do this.

wBw,
Lover of Volcano Box

Dear Brother,
Some Problem Why we are hiden Next Coming Beta Exe Verion. bz many user request for Beta Exe.
we are work on it and many many problem solved .
sure coming soon release update.

Just wait

Regard
FullFlashPak

KYEJUSA · 06-14-2015, 20:18

Stillwaiting for update, till now always say soon, when

Rajendra012 · 06-15-2015, 08:45

Which version ???
Release Date???

EjazATF · 06-15-2015, 11:12

Which version is this Full Flash bro ?
1.2.2D or 1.2.3

masterRt1994 · 06-24-2015, 16:36

Quote:

Originally Posted by EjazATF

Which version is this Full Flash bro ?
1.2.2D or 1.2.3

1.2.4

regards
masterRt1994

asmobile2 · 12-13-2015, 08:12

please share firmware ...

shariq_3157 · 12-16-2015, 16:50

20:14:03 > Access to functional permissions from server...OK!
>>Analysis of USB port,Please insert phone USB cable.
Open port failure, set definition again or re-plug pho
20:14:17 > Access to functional permissions from server...
20:14:20 > Access to functional permissions from server...OK!
>>Analysis of USB port,Please insert phone USB cable.
20:14:24 >
20:14:24 > Internal version: SPRD3
>>Boot downloaded.
20:14:25 > Start boot please wait a moment....
20:14:27 > Spreadtrum Boot Block version 1.1
>>Boot downloaded.
20:14:27 > CPU TYPE:SC7715[7715A000]
>>Boot downloaded.
20:14:28 > Flash ID: 009800BC9066
20:14:28 > Flash Type:[TOSHIBA] TYBC0A111236KC10
20:14:28 > FLASH LEN:0x20000000
20:14:28 >
20:14:28 > The phone is setting back to Factory...
20:14:36 > >>Formatting completed.

Mansoor_balushi · 04-08-2016, 10:06

Quote:

Originally Posted by FullFlashPak

World Ist Spd Andorid 8810/6820 Gfive President Shark 1 Read Firmware ,Format & Write Firmware with Bin File No Face Any Issue.
Like....
During Read FlashFile Phone Dead Or After Read Flash File Phone Dead,
After Format Phone Dead Or Hang On Logo. Or Phone Restar Problem.
After Write Firmware Phone Dead Or Hang On Logo Etc Etc.

Reall Very Safe Working All Opation Like Read Flashfile.Format, Write Firmware ,

Format, Reall Its Working Magic No Face Any Problem After Format.
Phone Working Very well Same Like Before. No hang or restar problem or Dead Problem Face.

Other XYZ Have This Power ,Becasue Its Merapi Magic Tool

Info Logs,

Code:

13:41:01 > Internal version: SPRD3
>>Boot downloaded.
 13:41:01 > Start boot please wait a moment....
 13:41:03 > Spreadtrum Boot Block version 1.1
>>Boot downloaded.
 13:41:04 > CPU TYPE:SC8810/6820 [88100001]
 13:41:04 > Flash ID: 00AD00BC90555400
 13:41:04 > Flash Type:[Hyundai] NAND_HY27UT088G2A
 13:41:04 > FLASH LEN:0x20000000
 13:41:04 > 
>>mtdparts=sprd-nand:256k(spl),1m(2ndbl),256k(params),1m(vmjaluna),9m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),207m(system),173m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic),512k(simlock),10m(intmemory)
>>Analysis flash internal data fail.

Read Flash File Logs,

Code:

>>Analysis of USB port,Please insert phone USB cable.
 13:43:29 > 
 13:43:29 > Internal version: SPRD3
>>Boot downloaded.
 13:43:29 > Start boot please wait a moment....
 13:43:31 > Spreadtrum Boot Block version 1.1
>>Boot downloaded.
>>Boot downloaded.
 13:43:33 > Flash ID: 00AD00BC9055
 13:43:33 > Flash Type:[Hyundai] NAND_HY27UT088G2A
 13:43:33 > FLASH LEN:0x20000000
 13:43:33 > 
>>Reading completed.
 14:20:12 > Read time: 36 min 39 s

Format Logs,

Code:

>Analysis of USB port,Please insert phone USB cable.
 14:27:05 > 
 14:27:05 > Internal version: SPRD3
>>Boot downloaded.
 14:27:05 > Start boot please wait a moment....
 14:27:07 > Spreadtrum Boot Block version 1.1
>>Boot downloaded.
>>Boot downloaded.
 14:27:09 > Flash ID: 00AD00BC9055
 14:27:09 > Flash Type:[Hyundai] NAND_HY27UT088G2A
 14:27:09 > FLASH LEN:0x20000000
 14:27:09 > 
>>Set to Factory successfully.

Write Firmware Logs

Code:

 >>Analysis of USB port,Please insert phone USB cable.
 14:45:58 > 
 14:45:58 > Internal version: SPRD3
>>Boot downloaded.
 14:45:59 > Start boot please wait a moment....
 14:46:01 > Spreadtrum Boot Block version 1.1
>>Boot downloaded.
>>Boot downloaded.
 14:46:02 > Flash ID: 00AD00BC9055
 14:46:02 > Flash Type:[Hyundai] NAND_HY27UT088G2A
 14:46:02 > FLASH LEN:0x20000000
 14:46:02 > 
>>Erase flash complete.
>>Writing completed.

Regard
FullFlashPak

master please share Flash file GfiveShark1 Bin or factory Pac file please

gunit1 · 05-01-2016, 19:58

please share Flash file GfiveShark1 Bin or factory Pac file please

RanaBhai · 08-22-2016, 15:34

i m making format gfive shark1 but it not working just showing like this and stable

12-16-2015, 16:50	#12 (permalink)
shariq_3157 Freak Poster Join Date: Apr 2008 Posts: 105 Member: 741757 Status: Offline Thanks Meter: 12	spd format done with merapi 1.3.6 20:14:03 > Access to functional permissions from server...OK! >>Analysis of USB port,Please insert phone USB cable. Open port failure, set definition again or re-plug pho 20:14:17 > Access to functional permissions from server... 20:14:20 > Access to functional permissions from server...OK! >>Analysis of USB port,Please insert phone USB cable. 20:14:24 > 20:14:24 > Internal version: SPRD3 >>Boot downloaded. 20:14:25 > Start boot please wait a moment.... 20:14:27 > Spreadtrum Boot Block version 1.1 >>Boot downloaded. 20:14:27 > CPU TYPE:SC7715[7715A000] >>Boot downloaded. 20:14:28 > Flash ID: 009800BC9066 20:14:28 > Flash Type:[TOSHIBA] TYBC0A111236KC10 20:14:28 > FLASH LEN:0x20000000 20:14:28 > 20:14:28 > The phone is setting back to Factory... 20:14:36 > >>Formatting completed.

06-13-2015, 15:34	#2 (permalink)
KYEJUSA No Life Poster Join Date: Nov 2006 Location: DEATH VALLEY Posts: 1,459 Member: 394869 Status: Offline Sonork: TAKE NO CHANCES Thanks Meter: 500	When release this update

06-13-2015, 17:40	#3 (permalink)
moh_boulk17 No Life Poster Join Date: Jan 2006 Location: algeria Posts: 1,476 Member: 217891 Status: Offline Thanks Meter: 237	how format work with u look here >>Analysis flash internal data fail. ????????????????

06-14-2015, 08:58	#5 (permalink)
Nasir Mobiles No Life Poster Join Date: Sep 2006 Location: ---> Hope Posts: 2,028 Member: 355782 Status: Offline Thanks Meter: 1,265	I know the time ppl hide their serial numbers and there is a known reason but I just cant understand is that why you are hiding version of your exe if u got a different version then why you showing reports with us ??? We dont have the version which one you have then simply we cant repair like u do. and reports are not movie or dramas watch and enjoy.w'll enjoy doing on own pc. beta tester is now long story. anyways if it concerns to beta why you are hiding 1.2.3B etc? PS: to Product supporter this is not your fault but the man who allow you to do this. wBw, Lover of Volcano Box

06-14-2015, 20:18	#7 (permalink)
KYEJUSA No Life Poster Join Date: Nov 2006 Location: DEATH VALLEY Posts: 1,459 Member: 394869 Status: Offline Sonork: TAKE NO CHANCES Thanks Meter: 500	Stillwaiting for update, till now always say soon, when

06-15-2015, 08:45	#8 (permalink)
Rajendra012 Freak Poster Join Date: May 2014 Location: Anywhere Posts: 99 Member: 2183673 Status: Offline Sonork: 100.1667189 Thanks Meter: 25	Which version ??? Release Date???

06-15-2015, 11:12	#9 (permalink)
EjazATF No Life Poster Join Date: May 2014 Location: D.I.Khan [KPK] Age: 34 Posts: 1,598 Member: 2192499 Status: Offline Sonork: Stopped using.. Thanks Meter: 1,763	Which version is this Full Flash bro ? 1.2.2D or 1.2.3

12-13-2015, 08:12	#11 (permalink)
asmobile2 Freak Poster Join Date: Jan 2013 Posts: 196 Member: 1864282 Status: Offline Sonork: 100.1625495 Thanks Meter: 25	please share firmware ...

05-01-2016, 19:58	#14 (permalink)
gunit1 No Life Poster Join Date: Oct 2013 Location: Cote Ivoire ABJ,tvlle, LBJ.23 Age: 39 Posts: 1,647 Member: 2041210 Status: Offline Thanks Meter: 541	please share Flash file GfiveShark1 Bin or factory Pac file please

08-22-2016, 15:34	#15 (permalink)
RanaBhai Freak Poster Join Date: Jan 2014 Location: Lahore,Pak Age: 35 Posts: 364 Member: 2112799 Status: Offline Thanks Meter: 87	i m making format gfive shark1 but it not working just showing like this and stable