lenovo A816 dead after flash - GSM-Forum

kong5271 · 01-20-2016, 19:48

device become cannot power on after flashing with Lenovo_A816_S017_150527 by miflash.
now usb driver become qshusb_bluk........pls give me some guide how to flash back to power on

**Brka** · 01-20-2016, 20:21

Quote:

Originally Posted by kong5271

device become cannot power on after flashing with Lenovo_A816_S017_150527 by miflash.
now usb driver become qshusb_bluk........pls give me some guide how to flash back to power on

Fortunatly, it CAN be unbricked.

Full Instructions how to use QFIL (from QPST) (translated) - HERE

**** EDIT: Tested Multi-Language ROM for phones from Europe (tested on phone from serbia):

A816_A_0017_140928 - VIBEUI_V2.0_1439_ST Android 4.4.4
Used xml file - update_wipe.xml

And another ROM for Chinese A816 - HERE

b.r.
Alex

**Brka** · 01-20-2016, 20:32

- Start QFIL, Programmer path - browse unpacked ROM location, select prog_emmc_firehose_8916.mbn
- Load XML, select from ROM folder rawprogram0.xml , select patch file patch0.xml
- Connect Phone, Select COM port, Press DOWNLOAD, and be patient until done.

nafiz8371 · 02-07-2016, 10:34

i have same problem pls any solution to unbrick lenovo a816

**Brka** · 02-07-2016, 15:20

Quote:

Originally Posted by nafiz8371

i have same problem pls any solution to unbrick lenovo a816

Yes, solution is to open your eyes and to read thread
From beginning, if needed, over and over again.

B r
Alex

SAJONDUTTA · 03-16-2017, 19:19

sir problem after brick no edl mood9008 only show 9006 driver so never flash any soft help me how can recover

**Brka** · 03-17-2017, 01:57

Quote:

Originally Posted by SAJONDUTTA

sir problem after brick no edl mood9008 only show 9006 driver so never flash any soft help me how can recover

Open the phone, and take picture of mainboard from both sides.
That's the only way I could show you what to try.

b.r.
Alex

SAJONDUTTA · 03-17-2017, 06:58

Quote:

Originally Posted by Brka

Open the phone, and take picture of mainboard from both sides.
That's the only way I could show you what to try.

b.r.
Alex

**Brka** · 03-17-2017, 22:18

Try attached picture and post results ....

b.r.
Alex

SAJONDUTTA · 03-18-2017, 16:51

Quote:

Originally Posted by Brka

Try attached picture and post results ....

b.r.
Alex

ok i try then result................

SAJONDUTTA · 03-19-2017, 07:49

thanks 4+5 is tp bur 9008 show only 20 sec then out 9006

SAJONDUTTA · 03-19-2017, 08:03

[/QUOTE]5843036967613[/IMG]

***** EDIT:
now set is runing use xxxxx only write boot and recovery file under 20 sec then mobile allays show 9008 then flash qfil but restart

***** EDIT:
ur given 2 file A816_A_0017_140928 - VIBEUI_V2.0_1439_ST after black but restart and And another ROM for Chinese A816 - HERE file show lenevo but restart

***** EDIT:
sir when recover mode set never restart but fast boot mood set restart

**Brka** · 03-19-2017, 15:51

Very big probability of eMMC failure.

With one of those two roms, phone must power on,
I reflashed same phone few days ago.
(Working phone, flashed for test),
With one of them - black screen, with another,
It powered on.

B.r.
Alex

**aZimBahar** · 03-20-2017, 05:53

Once perform with eMMC Software Download. 9006 create new drive on your pc

**Brka** · 03-20-2017, 06:16

As I already wrote... it's probably HARDWARE malfunction.

Try to flash it WITHOUT battery, if it still goes to 9006 port,
and drivers are okay, and flashing fails,
last hope is to try on another PC, and if all the same,
well, nothing else to do.
Big question is if even replacing eMMC will help.

b.r.
Alex

01-20-2016, 19:48	#1 (permalink)
kong5271 Freak Poster Join Date: Nov 2007 Posts: 144 Member: 638919 Status: Offline Thanks Meter: 17	lenovo A816 dead after flash device become cannot power on after flashing with Lenovo_A816_S017_150527 by miflash. now usb driver become qshusb_bluk........pls give me some guide how to flash back to power on

01-20-2016, 20:32	#3 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,206 Member: 163 Status: Offline Thanks Meter: 7,784	- Start QFIL, Programmer path - browse unpacked ROM location, select prog_emmc_firehose_8916.mbn - Load XML, select from ROM folder rawprogram0.xml , select patch file patch0.xml - Connect Phone, Select COM port, Press DOWNLOAD, and be patient until done. __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

03-19-2017, 08:03	#12 (permalink)
SAJONDUTTA No Life Poster Join Date: Dec 2008 Location: bangladesh Posts: 1,916 Member: 926902 Status: Offline Sonork: 100.1655575 Thanks Meter: 517	[/QUOTE]5843036967613[/IMG] *** EDIT: now set is runing use xxxxx only write boot and recovery file under 20 sec then mobile allays show 9008 then flash qfil but restart * EDIT: ur given 2 file A816_A_0017_140928 - VIBEUI_V2.0_1439_ST after black but restart and And another ROM for Chinese A816 - HERE file show lenevo but restart *** EDIT: sir when recover mode set never restart but fast boot mood set restart Last edited by Brka; 03-20-2017 at 06:13.

03-19-2017, 15:51	#13 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,206 Member: 163 Status: Offline Thanks Meter: 7,784	Very big probability of eMMC failure. With one of those two roms, phone must power on, I reflashed same phone few days ago. (Working phone, flashed for test), With one of them - black screen, with another, It powered on. B.r. Alex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

03-20-2017, 06:16	#15 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,206 Member: 163 Status: Offline Thanks Meter: 7,784	As I already wrote... it's probably HARDWARE malfunction. Try to flash it WITHOUT battery, if it still goes to 9006 port, and drivers are okay, and flashing fails, last hope is to try on another PC, and if all the same, well, nothing else to do. Big question is if even replacing eMMC will help. b.r. Alex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

02-07-2016, 10:34	#4 (permalink)
nafiz8371 Freak Poster Join Date: Jan 2008 Posts: 227 Member: 687836 Status: Offline Thanks Meter: 29	i have same problem pls any solution to unbrick lenovo a816

03-16-2017, 19:19	#6 (permalink)
SAJONDUTTA No Life Poster Join Date: Dec 2008 Location: bangladesh Posts: 1,916 Member: 926902 Status: Offline Sonork: 100.1655575 Thanks Meter: 517	sir problem after brick no edl mood9008 only show 9006 driver so never flash any soft help me how can recover

03-19-2017, 07:49	#11 (permalink)
SAJONDUTTA No Life Poster Join Date: Dec 2008 Location: bangladesh Posts: 1,916 Member: 926902 Status: Offline Sonork: 100.1655575 Thanks Meter: 517	thanks 4+5 is tp bur 9008 show only 20 sec then out 9006

03-20-2017, 05:53	#14 (permalink)
aZimBahar Product Manager Join Date: Dec 2009 Location: CEO.of.ROMDevelopers Age: 32 Posts: 16,005 Member: 1174508 Status: Offline Sonork: 100.1593820 Thanks Meter: 11,978	Once perform with eMMC Software Download. 9006 create new drive on your pc