Yt3-x50m frp - GSM-Forum

pvanecek · 01-03-2017, 14:24

Hello Masters!
I have a problem - my customer give me YT3-X50M to repair - He has done wipe data - factory reset from recovery menu (power+volume up). FRP was not disabled evidently - the message "Device was reset ..." is displayed. Problem is, he don't know e-mail or password (or phone) he provided before. Because he only need access to google play, so he created new account aka blablablah at gmail with some creepy password. The trick with assistant or calling setting via at char doesn't work - there is no more any menu after long push at.

ROM version is YT3-X50M_USR_S000127_1611241727_Q1241_ROW

Is there any possibility to solve this?

**Brka** · 01-03-2017, 22:03

Of course, just downgrade to oldest possible version via QPST (YT3-X50M_USR_S017, Android 5.1),
and mentioned trick should work.

Firmware, download - HERE
Flashing with QFIL (Part of QPST package).

b.r.
Alex

pvanecek · 01-10-2017, 10:25

Doing something wrong

All installed, but only device I see (try volume up - displayed tux image or volume down - aply update from ADB) is Lenovo Composite ADB Interface. No ports available

**Brka** · 01-12-2017, 19:31

Obviously ... powered off tab, hold volume keys and insert usb cable.
try with both volume keys, if nothing, hold volume down, and power on, should reboot,
and get into "9008 port" state (ready for download), if nothing, try volume up and same procedure.

b.r.
Alex

jupetin · 01-14-2017, 10:02

Hello, and long time to see!

Well, i have same problem. After update to 6.01 i just cant to log in. Dont know why, its been 2 weeks now and same message unable to sign in... ****.

I can put tablet to adb/usb debug mode and ready to flash, but i just dont know what files to put and where in QFIL. I downloaded package in that russian site.

Do i use prog_emmc_firehose_8909_ddr mbn or prog_emmc_firehose_8909_lite mbn or valitated_emmc_firehose_8909_ddr mbn or valitated_emmc_firehose_8909_lite mbn

and same quetion to that XML question. Is there any howto use qfil?

**Brka** · 01-14-2017, 19:40

Just search on Youtube, for example. It's all same ... check ie: A6000 flashing with qfil ...

b.r
Alex

pvanecek · 01-19-2017, 15:11

Have done finally. I hope never to have to do this again

You have right - power down tablet, hold volume down and connect USB.

Thank you very much!

01-03-2017, 14:24	#1 (permalink)
pvanecek Junior Member Join Date: Jan 2017 Posts: 3 Member: 2668233 Status: Offline Thanks Meter: 0	Yt3-x50m frp Hello Masters! I have a problem - my customer give me YT3-X50M to repair - He has done wipe data - factory reset from recovery menu (power+volume up). FRP was not disabled evidently - the message "Device was reset ..." is displayed. Problem is, he don't know e-mail or password (or phone) he provided before. Because he only need access to google play, so he created new account aka blablablah at gmail with some creepy password. The trick with assistant or calling setting via at char doesn't work - there is no more any menu after long push at. ROM version is YT3-X50M_USR_S000127_1611241727_Q1241_ROW Is there any possibility to solve this?

01-03-2017, 22:03	#2 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,206 Member: 163 Status: Offline Thanks Meter: 7,785	Of course, just downgrade to oldest possible version via QPST (YT3-X50M_USR_S017, Android 5.1), and mentioned trick should work. Firmware, download - HERE Flashing with QFIL (Part of QPST package). b.r. Alex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

01-12-2017, 19:31	#4 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,206 Member: 163 Status: Offline Thanks Meter: 7,785	Obviously ... powered off tab, hold volume keys and insert usb cable. try with both volume keys, if nothing, hold volume down, and power on, should reboot, and get into "9008 port" state (ready for download), if nothing, try volume up and same procedure. b.r. Alex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

01-14-2017, 19:40	#6 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,206 Member: 163 Status: Offline Thanks Meter: 7,785	Just search on Youtube, for example. It's all same ... check ie: A6000 flashing with qfil ... b.r Alex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

01-10-2017, 10:25	#3 (permalink)
pvanecek Junior Member Join Date: Jan 2017 Posts: 3 Member: 2668233 Status: Offline Thanks Meter: 0	Doing something wrong All installed, but only device I see (try volume up - displayed tux image or volume down - aply update from ADB) is Lenovo Composite ADB Interface. No ports available

01-14-2017, 10:02	#5 (permalink)
jupetin Junior Member Join Date: Jun 2008 Location: Northerm District Posts: 3 Member: 789361 Status: Offline Thanks Meter: 0	Hello, and long time to see! Well, i have same problem. After update to 6.01 i just cant to log in. Dont know why, its been 2 weeks now and same message unable to sign in... ****. I can put tablet to adb/usb debug mode and ready to flash, but i just dont know what files to put and where in QFIL. I downloaded package in that russian site. Do i use prog_emmc_firehose_8909_ddr mbn or prog_emmc_firehose_8909_lite mbn or valitated_emmc_firehose_8909_ddr mbn or valitated_emmc_firehose_8909_lite mbn and same quetion to that XML question. Is there any howto use qfil?

01-19-2017, 15:11	#7 (permalink)
pvanecek Junior Member Join Date: Jan 2017 Posts: 3 Member: 2668233 Status: Offline Thanks Meter: 0	Have done finally. I hope never to have to do this again You have right - power down tablet, hold volume down and connect USB. Thank you very much!