831c
 

how to unlock this model

wn i activate to diag say invalid msl code . i tried sprint method.

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.08.20.0612_4
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.16.651.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT44CSF03125
(bootloader) imei: 990004993478126
(bootloader) imei2: Not Support
(bootloader) meid: 99000499347812
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d4c3cae5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Execution time is 14(ms)
all: Done!
Reading secure flag information
... (bootloader) secure_flag: 3
Execution time is 4(ms)
OKAY
Reading CID information
... (bootloader) cid: SPCS_001
Execution time is 4(ms)
OKAY
Reading MEID information
... (bootloader) meid: 99000499347812
Execution time is 6(ms)
OKAY
Read information completed.

Hello,

Make sure your MEID is original. Check box / phone label to compare.

yes i checked on sim try imei same . invalid spc

517245 - is this the SPC you are getting?

yes , but always says invalid msl ,

Bro my openion is

1. reflash the device
2. Factory reset and wipe cache via recovery mode
3. Try again unlock operation

Yes i updated to 5 .0 and getting same problem


Sent from my iPhone using Tapatalk

Sorry, if your SPC was changed/damaged there is nothing we can do at the moment.

P.S. Just try 000000 as SPC.

Ok


Sent from my iPhone using Tapatalk