Can I S-off My Htc One x+ !!!!

[algerienbox]

Hi To All......

Info In Fastboot Mode :

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 3.1204.169D3.33
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.17.161.3
(bootloader) serialno: FA2A5W101640
(bootloader) imei: 353xxxxxxxxx1508
(bootloader) product: enrc2b_u
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PM3511000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3668mV
(bootloader) devpower: 10
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Execution time is 1(s)
Reading CID information
... (bootloader) DEBUG: cid: VODAP102
OKAY
Execution time is 279(ms)
Reading MEID information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 249(ms)
Reading IMEI1 information
... (bootloader) DEBUG: imei: 353567050211508
OKAY
Execution time is 280(ms)
Reading IMEI2 information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 249(ms)
Reading secure flag information
... (bootloader) DEBUG: secure_flag: 3
OKAY
Execution time is 372(ms)
Reading serial number information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 1(s)
Read information completed.

If Yes How To Do It and Thanks

[deepakgarg]

Open xtc2clip Tool and enter the your security level
press Save to drive



1.Remove Xtc2clip From Computer and use Y cable to connect it to phone
2.Put Phone in Bootloader Menu [hold "volume down + power button " for few seconds ]



Select simlock menu ., wait for few seconds


reboot phone to verify security level


Read phone Information Phone & xtc2clip Connected with Fastboot mode

[algerienbox]

@deepakgarg thanks for your answer

i dont have the Y cable No Other way WIthout THis Y Cable ?

[deepakgarg]

you can make y cable easily check google

[algerienbox]

thanks man.....

im making my cable Its Ok but when i Clic Simlock Nothing Hapen (see Picture)
phone stay like THis !!!! im doing some think Wrong ?

[shivasrage]

Originally Posted by algerienbox

thanks man.....

im making my cable Its Ok but when i Clic Simlock Nothing Hapen (see Picture)
phone stay like THis !!!! im doing some think Wrong ?

Ok for me it worked like this:

Turn one x+ completely off
connect y-cable turn power on while holding volume down
wait until bootloader prints "please plug off USB" then unplug
don't reboot (!) only reconnect and go to simlock
press simlock let xtc2clip do it's magic

if it worked phone should print:

Press (POWER) to reboot

(if not try again..also for it worked after 2 times)

Done.