change imei desire x dual t329w

[panalim]

hi my brother ..
plz help me to change imei desire x dual t329w ..

[xtc2clip]

Please provide phone info from fastboot mode.

[panalim]

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.12.0002
(bootloader) version-baseband: 10.11.45D.02_2M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.1402.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: 123456789012
(bootloader) imei: 355195000000017
(bootloader) meid:
(bootloader) product: protodug
(bootloader) platform: HBOOT-8225
(bootloader) modelid: PM66*****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: HTC
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 1035de54
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
Execution time is 15(ms)
all: Done!
Reading secure flag information
... (bootloader) £…£÷HTCE
(bootloader) Done!
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [RADIO_ERR] SD init fail !!!
(bootloader) Wait for AMSS ready
(bootloader) AMSS is ready
(bootloader) readsecureflag: secure flag: OFF
Execution time is 22691(ms)
OKAY
Reading CID information
... (bootloader) cid: 11111111
Execution time is 15(ms)
OKAY
Reading MEID information
... (bootloader) meid: 000000000
Execution time is 0(ms)
OKAY
Read information completed.

[mhammadleo]

Hello Bro
need repair imei phone in my hand and ready for study ?

[xtc2clip]

Hello,

It should be supported in legacy mode.

[xtc2clip]

So please connect clip and try to repair IMEI, then post the log in case of failure.