GSM-Forum

GSM-Forum (http://forum.gsmhosting.com/vbb/)
-   xtc2cliP (http://forum.gsmhosting.com/vbb/f961/)
-   -   desire u 500 unlock bl problem (http://forum.gsmhosting.com/vbb/f961/desire-u-500-unlock-bl-problem-1977535/)

themobileguy1 08-09-2015 08:33

desire u 500 unlock bl problem
 
set connect as fstbod mode ok
unlock bl ok
send recve tokn ok
when it shows unlock bl press no .....do not unlock bl then poower switch wrk
and when press yes ....... then power switch not wrk
nthing hapn
what i do................

evanoo 08-09-2015 12:39

please post logs of the process

xtc2clip 08-10-2015 10:40

Your phone must be fully working before making bootloader unlock.
Make sure it powers on before trying to do anything with it.

themobileguy1 08-12-2015 13:27

no..........it jst hng on fastbood mode
please explain how to flash with xtcclip
am newbie

themobileguy1 08-14-2015 15:53

Code:

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.03.0001
(bootloader) version-baseband: 14.15.50QD.26
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.707.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3B1WE00554
(bootloader) imei: 357654052480673
(bootloader) meid:
(bootloader) product: z4dug
(bootloader) platform: HBOOT-8x25Q
(bootloader) modelid: 0P3Z10000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 3720mV
(bootloader) partition-layout: HTC
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e9f20193
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
Execution time is 11(ms)
all: Done!
Reading secure flag information
... (bootloader) Set pmic_level Done! L13 2850
(bootloader) Done!
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) [ERR] Cmd5 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd55 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [RADIO_ERR] SD init fail !!!
(bootloader) Wait for AMSS ready

bl unlock

Code:

Starting bootloader unlock procedure
Phone detected, reading token...
Token detected successfully
Sending flash unlocktoken unlocktoken_HT3B1WE00554.bin
sending 'unlocktoken' (0 KB)... OKAY
writing 'unlocktoken'... (bootloader) unlock token check successfully
Execution time is 157(ms)
OKAY
Please continue the unlock process on your phone.


xtc2clip 08-14-2015 16:03

The process goes fine, if your phone is damaged you must flash it first.

dolatabadi 08-21-2015 13:55

سلام
من desire 500 دارم
تموم مراحل رو انجام میدم
مرحله اخر روی yes دیگه power کار نمیکنه

xtc2clip 08-21-2015 15:32

Quote:

Originally Posted by dolatabadi (Post 11237195)
سلام
من desire 500 دارم
تموم مراحل رو انجام میدم
مرحله اخر روی yes دیگه power کار نمیکنه

Sorry, we do not speak your language yet.


All times are GMT +1. The time now is 23:15.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.22215 seconds with 5 queries

SEO by vBSEO