htc 816 a5 dwg soff and cid changed-tried official firmwares-can not-help me

[zone3]

i have done many s-on sets using official firmwares-

first time get a s-off and cid changed 11111111 set hang in logo-info as below

C:\android>fastboot getvar all
< waiting for any device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.31.50.1215
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HC48AMZ00850
(bootloader) imei: 352795065074576
(bootloader) imei2: 352795065074584
(bootloader) meid: A1000037DA0E90
(bootloader) product: a5_dwg
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C51000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 622b1fa2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.059s

C:\android>

i know it need partial firmware flash and then full firmware

help me for partial firmware number

[deepakgarg]

use file number 469282 from support

[zone3]

Originally Posted by deepakgarg

use file number 469282 from support

did-then flashed using firmware

0P9CIMG_A5_DWG_M60_DESIRE_SENSE70_MR_hTC_Asia_WWE_ 3.14.707.1_Radio_1.31.50.1215_CNV_Indonesia_3.07_0 9A_release_469282_signed_2_4

noe set on-but baseband and imei gone

help me

any other firmware help me?

still in fastboot getvar all imei ok as below

C:\android>fastboot getvar all
< waiting for any device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.31.50.1215
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HC48AMZ00850
"""""""""""""""""""""""(bootloader) imei: 352795065074576
""""""""""""""""""""""(bootloader) imei2: 352795065074584"""""""""""""""""""""""

so sure its software problem

help me

[deepakgarg]

why main is still blank in log ?
if after flashing partial and full firmware version still not readable than u might have emmc problem