how to m8 ul s-off

[lerner_]

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA46MWM00468
(bootloader) imei: 357871055839503
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAP304
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 55(ms)
Reading CID information
... (bootloader) cid: VODAP304
OKAY
Execution time is 6(ms)
Reading MEID information
... (bootloader) meid: 00000000000000
OKAY
Execution time is 19(ms)
Reading IMEI1 information
... (bootloader) imei: 357871055839503
OKAY
Execution time is 9(ms)
Reading IMEI2 information
... (bootloader) readimei2: Not Support
OKAY
Execution time is 43(ms)
Reading secure flag information
... (bootloader) secure_flag: 3
OKAY
Execution time is 8(ms)
Reading serial number information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 20(ms)
Read information completed.

[deepakgarg]

use sdmode method for m8

[lerner_]

thanks for reply

i don't know how to use this method sir

[Mr.3.]

Check sticky thread always

http://forum.gsmhosting.com/vbb/f961...-step-1964502/

Check this thread too , it will explain lot
http://forum.gsmhosting.com/vbb/f961...-here-2028776/

[lerner_]

Originally Posted by Mr.3.

Check sticky thread always

http://forum.gsmhosting.com/vbb/f961...-step-1964502/

Check this thread too , it will explain lot
http://forum.gsmhosting.com/vbb/f961...-here-2028776/

we add new imei or phone orignal imei !
also what will be cid ! means 111111 ?????
also new security will be what !!!! 0 - security off ! 1- security 1 (s-eng) or what ????

[lerner_]

Welcome to XTC 2 Clip!
Web: http://www.xtc2.net
Email: [email protected]
Support forum: xtc2cliP - GSM-Forum

Please connect phone in FASTBOOT (vol_down + pwr) OR powered ON (OS) mode to enable buttons, waiting for the phone ...

Checking for new version...
Phone DISconnected
Great, you are using latest version!
Writing information to service files on SD card...
IMEI settings saved
CID settings saved
Security settings saved
Done.


add new imei mark than new cid mark add 1111111 than new security mark and saved to drive

[deepakgarg]

http://forum.gsmhosting.com/vbb/11140864-post1.html
try clip system repair