How to unlock Softbank HTC SENSE - GSM-Forum

sky_finder · 09-04-2018, 16:01

how to unlock this

HTC SENSE from softbank JAPAN

This is with out sim.If I put the sim also same.

If I unlock the screen it ask the code.I have the code but code is not accepted.

Any help bro to unlock this

TX

xtc2clip · 09-04-2018, 17:20

Hi!

Wow, that's pretty old! Can you post fastboot information here please?

I think in your case it can be reflashed to generic firmware and simlock will be gone.

thuanmobile896 · 09-06-2018, 06:59

Quote:

Originally Posted by sky_finder

how to unlock this

HTC SENSE from softbank JAPAN

This is with out sim.If I put the sim also same.

If I unlock the screen it ask the code.I have the code but code is not accepted.

Any help bro to unlock this

TX

HTC Desire HD (HTC Ace) – A9191 – G10
Advanced ACE Hack Kit
Radio S-Off, superCid & carrier sim unlock

or, xtc2clip , tab Legacy

sky_finder · 10-01-2018, 14:51

I got the phone again

10/1/2018 6:53:50 PM

10/1/2018 6:53:50 PM Checking for new version...

10/1/2018 6:53:50 PM Great, you are using latest version!

10/1/2018 6:53:51 PM Phone DISconnected

10/1/2018 6:54:45 PM

10/1/2018 6:54:45 PM Checking for new version...

10/1/2018 6:54:45 PM Great, you are using latest version!

10/1/2018 6:54:46 PM Phone DISconnected

10/1/2018 7:01:27 PM Phone connected [HT0B5RX02871] *** Fastboot mode

10/1/2018 7:01:46 PM Reading information...

10/1/2018 7:01:46 PM Using Fastboot mode...

10/1/2018 7:01:46 PM Reading common information

10/1/2018 7:01:47 PM (bootloader) version: 0.5

(bootloader) version-bootloader: 0.85.0007

(bootloader) version-baseband: 26.03.02.26_M

(bootloader) version-cpld: None

(bootloader) version-microp: 0438

(bootloader) version-main: 1.35.762.2

(bootloader) serialno: HT0B5RX02871

(bootloader) imei: 352668041423771

(bootloader) product: ace

(bootloader) platform: HBOOT-7230

(bootloader) modelid: PD9810000

(bootloader) cidnum: SBM__802

(bootloader) battery-status: good

(bootloader) battery-voltage: 4089mV

(bootloader) partition-layout: Generic

(bootloader) security: on

(bootloader) build-mode: SHIP

(bootloader) boot-mode: FASTBOOT

(bootloader) commitno-bootloader: dirty-7eafc656

(bootloader) hbootpreupdate: 11

(bootloader) gencheckpt: 0

all: Done!

Execution time is 15(ms)

10/1/2018 7:01:47 PM Reading CID information

10/1/2018 7:01:47 PM ... (bootloader) [ERR] Command error !!!

OKAY

Execution time is 0(ms)

10/1/2018 7:01:47 PM Reading MEID information

10/1/2018 7:01:48 PM ... (bootloader) [ERR] Command error !!!

OKAY

Execution time is 0(ms)

10/1/2018 7:01:48 PM Reading IMEI1 information

10/1/2018 7:01:48 PM ... (bootloader) [ERR] Command error !!!

OKAY

Execution time is 15(ms)

10/1/2018 7:01:48 PM Reading IMEI2 information

10/1/2018 7:01:48 PM ... (bootloader) [ERR] Command error !!!

OKAY

Execution time is 15(ms)

10/1/2018 7:01:48 PM Reading secure flag information

10/1/2018 7:01:48 PM ... (bootloader) [ERR] Command error !!!

OKAY

Execution time is 31(ms)

10/1/2018 7:01:48 PM Reading serial number information

10/1/2018 7:01:49 PM ... (bootloader) [ERR] Command error !!!

OKAY

Execution time is 15(ms)

10/1/2018 7:01:49 PM Read information completed.

10/1/2018 7:02:14 PM Trying to swtich into modem mode ...

10/1/2018 7:02:14 PM Sending oem rtask c

10/1/2018 7:02:20 PM ... FAILED (status read failed (Too many links))

Execution time is 5(s)

10/1/2018 7:02:20 PM Phone DISconnected

10/1/2018 7:03:55 PM Trying to connect in modem mode...

10/1/2018 7:03:55 PM Reading security info...

10/1/2018 7:03:55 PM Security is ON

10/1/2018 7:03:55 PM Reading CID...

10/1/2018 7:03:55 PM Reading IMEI...

10/1/2018 7:03:55 PM Reading SIMLOCK info...

10/1/2018 7:03:55 PM

10/1/2018 7:03:55 PM Checking lock status:

10/1/2018 7:03:55 PM Cannot read lock status

10/1/2018 7:03:55 PM Network lock is locked

10/1/2018 7:03:55 PM Network Subset is locked

10/1/2018 7:03:55 PM Service Provider is locked

10/1/2018 7:03:55 PM Corporate is locked

10/1/2018 7:03:55 PM SIM is locked

10/1/2018 7:03:55 PM

10/1/2018 7:03:55 PM SUCCESSFULLY connected

10/1/2018 7:04:22 PM Trying to perform sim unlock for network lock...

10/1/2018 7:04:22 PM The response was:

OK

10/1/2018 7:04:22 PM Trying to perform sim unlock for network subset...

10/1/2018 7:04:24 PM The response was:

OK

10/1/2018 7:04:24 PM Trying to perform sim unlock for service provider lock...

10/1/2018 7:04:24 PM The response was:

OK

10/1/2018 7:04:24 PM Trying to perform sim unlock for corporate lock...

10/1/2018 7:04:24 PM The response was:

OK

10/1/2018 7:04:24 PM Trying to perform sim unlock for sim lock...

10/1/2018 7:04:24 PM The response was:

OK

10/1/2018 7:05:09 PM Please wait, aborting current operation

10/1/2018 7:05:09 PM Legacy connect operation has been aborted

10/1/2018 7:05:14 PM Trying to connect in modem mode...

10/1/2018 7:05:14 PM Reading security info...

10/1/2018 7:05:14 PM Security is ON

10/1/2018 7:05:14 PM Reading CID...

10/1/2018 7:05:15 PM Reading IMEI...

10/1/2018 7:05:15 PM Reading SIMLOCK info...

10/1/2018 7:05:15 PM

10/1/2018 7:05:15 PM Checking lock status:

10/1/2018 7:05:15 PM Cannot read lock status

10/1/2018 7:05:15 PM Network lock is locked

10/1/2018 7:05:15 PM Network Subset is locked

10/1/2018 7:05:15 PM Service Provider is locked

10/1/2018 7:05:15 PM Corporate is locked

10/1/2018 7:05:15 PM SIM is locked

10/1/2018 7:05:15 PM

10/1/2018 7:05:15 PM SUCCESSFULLY connected

10/1/2018 7:05:24 PM Trying to perform S-OFF...

10/1/2018 7:05:26 PM The response was:

OK

10/1/2018 7:05:56 PM Trying to perform sim unlock for network lock...

10/1/2018 7:05:56 PM The response was:

OK

10/1/2018 7:05:56 PM Trying to perform sim unlock for network subset...

10/1/2018 7:05:56 PM The response was:

OK

10/1/2018 7:05:56 PM Trying to perform sim unlock for service provider lock...

10/1/2018 7:05:56 PM The response was:

OK

10/1/2018 7:05:56 PM Trying to perform sim unlock for corporate lock...

10/1/2018 7:05:56 PM The response was:

OK

10/1/2018 7:05:56 PM Trying to perform sim unlock for sim lock...

10/1/2018 7:05:56 PM The response was:

OK

10/1/2018 7:07:47 PM Please wait, aborting current operation

10/1/2018 7:07:47 PM Legacy connect operation has been aborted

10/1/2018 7:10:28 PM Trying to connect in modem mode...

10/1/2018 7:10:28 PM Reading security info...

10/1/2018 7:10:28 PM Security is OFF

10/1/2018 7:10:28 PM Reading CID...

10/1/2018 7:10:28 PM Reading IMEI...

10/1/2018 7:10:28 PM Reading SIMLOCK info...

10/1/2018 7:10:28 PM

10/1/2018 7:10:28 PM Checking lock status:

10/1/2018 7:10:28 PM Cannot read lock status

10/1/2018 7:10:28 PM Network lock is locked

10/1/2018 7:10:28 PM Network Subset is locked

10/1/2018 7:10:28 PM Service Provider is locked

10/1/2018 7:10:28 PM Corporate is locked

10/1/2018 7:10:28 PM SIM is locked

10/1/2018 7:10:28 PM

10/1/2018 7:10:28 PM SUCCESSFULLY connected

10/1/2018 7:10:39 PM Please wait, aborting current operation

10/1/2018 7:10:39 PM Legacy connect operation has been aborted

but still locked

any help bro

sky_finder · 10-01-2018, 14:57

Quote:

Originally Posted by thuanmobile896

HTC Desire HD (HTC Ace) – A9191 – G10
Advanced ACE Hack Kit
Radio S-Off, superCid & carrier sim unlock

or, xtc2clip , tab Legacy

I have done but still locked

Tx

sky_finder · 10-01-2018, 15:27

Quote:

Originally Posted by xtc2clip

Hi!

Wow, that's pretty old! Can you post fastboot information here please?

I think in your case it can be reflashed to generic firmware and simlock will be gone.

vPhone connected [HT0B5RX02871] *** Fastboot mode

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.85.0007
(bootloader) version-baseband: 26.03.02.26_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 1.35.762.2
(bootloader) serialno: HT0B5RX02871
(bootloader) imei: 352668041423771
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: SBM__802
(bootloader) battery-status: good
(bootloader) battery-voltage: 4089mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-7eafc656
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

all: Done!

Execution time is 15(ms)

Could you pls help me bro

Tx

xtc2clip · 10-01-2018, 19:29

Quote:

Originally Posted by sky_finder

vPhone connected [HT0B5RX02871] *** Fastboot mode

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.85.0007
(bootloader) version-baseband: 26.03.02.26_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 1.35.762.2
(bootloader) serialno: HT0B5RX02871
(bootloader) imei: 352668041423771
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: SBM__802
(bootloader) battery-status: good
(bootloader) battery-voltage: 4089mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-7eafc656
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

all: Done!

Execution time is 15(ms)

Could you pls help me bro

Tx

Your phone is S-ON, you can't use Legacy tab on S-ON phone.
S-OFF first, then use Legacy tab to simunlock again.

sky_finder · 10-03-2018, 14:40

Quote:

Originally Posted by xtc2clip

Your phone is S-ON, you can't use Legacy tab on S-ON phone.
S-OFF first, then use Legacy tab to simunlock again.

I try several method to unlock this set but failed/

As your manual

As on all HTC phones, there are 2 operation modes:

* Offline mode: CID, lock, unlock
* Direct mode: S-OFF, CID, IMEI, unlock

1. No matter what mode are you going to use, you must carefully EJECT the smartcard from the XTC2Clip and put it into your phone as a SIM CARD.
2. Offline mode:
- Put necessary files (CID and/or unlock config.dat) on the CLIP and connect it to your phone
- Go to fastboot->Simlock and perform operation as usual.=++++++sd ini failed

2. Direct mode:=====+++++++++++you said can not
- Connect phone in fastboot mode
- Go to legacy tab in XTC 2 Clip Tool
- Press "Step 2: Switch to modem mode", this will switch your phone into special modem mode.
- Install drivers, if necessary. ( Get drivers HERE: http://xtc2.net/downloads/qhsusb.rar )
- Press "Refresh" and select appropriate COM port (there usually will be only one).
- Press "Step 3: Connect"
- The software will read information from the phone, and you can continue to perform the desired operations

Could you please advice me how to unlock this.

Tx

sky_finder · 10-03-2018, 16:11

s-off is done but can not unlock

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.85.0007
(bootloader) version-baseband: 26.03.02.26_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 1.35.762.2
(bootloader) serialno: HT0B5RX02871
(bootloader) imei: 352668041423771
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: SBM__802
(bootloader) battery-status: good
(bootloader) battery-voltage: 4011mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-7eafc656
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 15(ms)
Reading CID information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 0(ms)
Reading MEID information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 0(ms)
Reading IMEI1 information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 31(ms)
Reading IMEI2 information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 31(ms)
Reading secure flag information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 15(ms)
Reading serial number information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 0(ms)
Read information completed.

what is this error bro

(bootloader) [ERR] Command error !!!

how to fix this

Thanks.

deepakgarg · 10-03-2018, 18:27

in first post did u say phone asks code even without sim ?

xtc2clip · 10-03-2018, 19:01

Quote:

Originally Posted by sky_finder

what is this error bro

(bootloader) [ERR] Command error !!!

how to fix this

Thanks.

This is no an error, you are just reading phone info, and this old model doesn't have readcid, etc commands, that is all.

sky_finder · 10-04-2018, 13:58

Quote:

Originally Posted by deepakgarg

in first post did u say phone asks code even without sim ?

yes bro but code is not accepted.

tx

sky_finder · 10-04-2018, 13:59

Quote:

Originally Posted by xtc2clip

This is no an error, you are just reading phone info, and this old model doesn't have readcid, etc commands, that is all.

So how to unlock this bro

Could you pls advice me bro

Tx

deepakgarg · 10-04-2018, 15:48

Quote:

Originally Posted by sky_finder

yes bro but code is not accepted.

tx

did u try hard reset ?

xtc2clip · 10-04-2018, 19:56

Quote:

Originally Posted by sky_finder

So how to unlock this bro

Could you pls advice me bro

Tx

I don't have this phone, so I can't check, but I have a number of success reports from previous years from our customers.

First - HTC phones never ask for codes without the sim card.

So my options are:

1. Try again Legacy tab (now when your phone is S-OFF)
2. Try SD mode tab - you can try to lock your phone with known code and then use it to unlock.
3. Try to reflash your phone, we have over 10 firmwares, just search for PD98

09-04-2018, 16:01	#1 (permalink)
sky_finder No Life Poster Join Date: May 2009 Location: Srilanka Posts: 1,892 Member: 1026122 Status: Offline Sonork: 100.1640842 Thanks Meter: 184	How to unlock Softbank HTC SENSE how to unlock this HTC SENSE from softbank JAPAN This is with out sim.If I put the sim also same. If I unlock the screen it ask the code.I have the code but code is not accepted. Any help bro to unlock this TX

09-04-2018, 17:20	#2 (permalink)
xtc2clip No Life Poster Join Date: Jun 2015 Posts: 6,556 Member: 2416253 Status: Offline Thanks Meter: 4,162	Hi! Wow, that's pretty old! Can you post fastboot information here please? I think in your case it can be reflashed to generic firmware and simlock will be gone.

10-03-2018, 16:11	#9 (permalink)
sky_finder No Life Poster Join Date: May 2009 Location: Srilanka Posts: 1,892 Member: 1026122 Status: Offline Sonork: 100.1640842 Thanks Meter: 184	s-off is done but can not unlock Reading information... Using Fastboot mode... Reading common information (bootloader) version: 0.5 (bootloader) version-bootloader: 0.85.0007 (bootloader) version-baseband: 26.03.02.26_M (bootloader) version-cpld: None (bootloader) version-microp: 0438 (bootloader) version-main: 1.35.762.2 (bootloader) serialno: HT0B5RX02871 (bootloader) imei: 352668041423771 (bootloader) product: ace (bootloader) platform: HBOOT-7230 (bootloader) modelid: PD9810000 (bootloader) cidnum: SBM__802 (bootloader) battery-status: good (bootloader) battery-voltage: 4011mV (bootloader) partition-layout: Generic (bootloader) security: off (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-7eafc656 (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 all: Done! Execution time is 15(ms) Reading CID information ... (bootloader) [ERR] Command error !!! OKAY Execution time is 0(ms) Reading MEID information ... (bootloader) [ERR] Command error !!! OKAY Execution time is 0(ms) Reading IMEI1 information ... (bootloader) [ERR] Command error !!! OKAY Execution time is 31(ms) Reading IMEI2 information ... (bootloader) [ERR] Command error !!! OKAY Execution time is 31(ms) Reading secure flag information ... (bootloader) [ERR] Command error !!! OKAY Execution time is 15(ms) Reading serial number information ... (bootloader) [ERR] Command error !!! OKAY Execution time is 0(ms) Read information completed. what is this error bro (bootloader) [ERR] Command error !!! how to fix this Thanks.

10-03-2018, 18:27	#10 (permalink)
deepakgarg No Life Poster Join Date: Jan 2006 Location: Chandigarh,India Age: 40 Posts: 5,790 Member: 220603 Status: Offline Thanks Meter: 1,164	in first post did u say phone asks code even without sim ?