HTC 802w (M7CDUG) CID and S-OFF problem - GSM-Forum

zoltar1308 · 12-14-2015, 16:56

DIRECT mode command this error

Sending oem writecid 11111111
... (bootloader) m7cdug_init_sd, SD card already power on
(bootloader) sdhw_7xxx_open: id=0
(bootloader) [ERR] Cmd5 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd55 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) E0902910 E0902E20
Phone DISconnected
Operation finished

xtc2clip · 12-14-2015, 19:47

Please read manual and quick start guide.

M7 must be unlocked using Y-cable.

zoltar1308 · 12-15-2015, 10:47

i read the manual but with the Y-cable the phone not power on

xtc2clip · 12-15-2015, 11:11

Quote:

Originally Posted by zoltar1308

i read the manual but with the Y-cable the phone not power on

Connect Y cable after powering on the phone and entering into fastboot mode, also check the schematics. In all the cases the problem is Y cable, not XTC 2 Clip.

zoltar1308 · 12-15-2015, 16:04

the Y cable is ok working with outher phone. i will try to power on in fastboot mode and connect the cable

12-14-2015, 16:56	#1 (permalink)
zoltar1308 No Life Poster Join Date: Oct 2006 Posts: 860 Member: 380870 Status: Offline Thanks Meter: 159	HTC 802w (M7CDUG) CID and S-OFF problem DIRECT mode command this error Sending oem writecid 11111111 ... (bootloader) m7cdug_init_sd, SD card already power on (bootloader) sdhw_7xxx_open: id=0 (bootloader) [ERR] Cmd5 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd55 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0xC0000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [SD_HW_ERR] SD: No device attached (bootloader) E0902910 E0902E20 Phone DISconnected Operation finished

12-14-2015, 19:47	#2 (permalink)
xtc2clip No Life Poster Join Date: Jun 2015 Posts: 6,556 Member: 2416253 Status: Offline Thanks Meter: 4,162	Please read manual and quick start guide. M7 must be unlocked using Y-cable.

12-15-2015, 10:47	#3 (permalink)
zoltar1308 No Life Poster Join Date: Oct 2006 Posts: 860 Member: 380870 Status: Offline Thanks Meter: 159	i read the manual but with the Y-cable the phone not power on

12-15-2015, 16:04	#5 (permalink)
zoltar1308 No Life Poster Join Date: Oct 2006 Posts: 860 Member: 380870 Status: Offline Thanks Meter: 159	the Y cable is ok working with outher phone. i will try to power on in fastboot mode and connect the cable