HTC desire 510 dont s-off with xtc 2.

[GrFocus]

Sending oem writesecureflag 0
... (bootloader) SecuritySDInit: counter = 1
(bootloader) a11chl_init_sd, SD card power on
(bootloader) a11chl_init_sd, SD card io already power on
(bootloader) sdhci_open: id=0
(bootloader) Initializing MMC host data structure and clock!
(bootloader) mmc slot#2 clock enabled
(bootloader) clock_config_mmc: slot 2, freq 192000000
(bootloader) GPLL0 is enabled
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) sdhci_set_bus_width: bus width 0
(bootloader) sdhci_clk_supply: freq 400000
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) The response for CMD8 does not match the supplied value
(bootloader) Decoded CID fields:
(bootloader) Manufacturer ID: 7f
(bootloader) OEM ID: 0x0
(bootloader) Product Name: 5270
(bootloader) Product revision: 5.2
(bootloader) Product serial number: B4E
(bootloader) Manufacturing date: 2 2015
(bootloader) sdhci_clk_supply: freq 50000000
(bootloader) sdhci_set_bus_width: bus width 1
(bootloader) Done initialization of the card
(bootloader) erase_grpsize: 152536064
(bootloader) erase_grpmult: 49152
(bootloader) wp_grpsize: 1
(bootloader) wp_grpen: 1
(bootloader) perm_wp: 0
(bootloader) temp_wp: 0
(bootloader) [Tuxera][Error] No exFAT partition found
(bootloader) writesecureflag: KeyCard remain count 10000
(bootloader) PID:325
(bootloader) Start Verify: 0
(bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) [PGFS] partition_update_pgfs: pg2fs_sec_recovery
OKAY
Execution time is 6(s)
Operation finished

What I not right do ?

And for flashing i have

Starting flash process...
target rom version: 1.18.1500.4
found large-zip header, file count: 6
processing file 1/6...
sending 'zip' (49786 KB)...
OKAY [ 2.695s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 7.424s

Phone dont start. Circle reboot. Help me please.

[allumts]

Hello,

Guide in Sticky Thread aren't for "Cosmetic" but for to be read carefully, HERE:

http://forum.gsmhosting.com/vbb/f961...tions-2170866/

BR
allumts

[Formingus]

Originally Posted by allumts

Hello,

Guide in Sticky Thread aren't for "Cosmetic" but for to be read carefully, HERE:

http://forum.gsmhosting.com/vbb/f961...tions-2170866/

BR
allumts

He is talking about 510
On your redirecting link is 530

BR F

[gsmro2012]

for desire 510 use sd mode

[Formingus]

Originally Posted by gsmro2012

for desire 510 use sd mode

Did you try or its just suggest ?
Because direct soff says not supported.
If you have more info sharing will be appreciated.

Regards.


Sent from my iPhone using Tapatalk

[xtc2clip]

According to the log your phone is S-OFF now, do you have problem with S-OFF or with flashing ?

[Formingus]

Originally Posted by xtc2clip

According to the log your phone is S-OFF now, do you have problem with S-OFF or with flashing ?

Hi Friend,

No, Phone is S-ON

When i try to s-off

Starting flash process...
sending 'recovery' (10730 KB)...
OKAY [ 1.410s]
writing 'recovery'...
OKAY [ 1.354s]
finished. total time: 2.764s
Recovery flash process completed.

Then Reboot to Recovery

On Press S-Off i am getting

Please wait, preparing your phone...
Sorry, qcom

 is not yet supported.

While unlocking process goes Fine, but No Network on GSM

Phone is Spring USA HTC Desire 510 but on *#*#4636*#*# there is GSM, Evdo LTE and rest bands. I Try all of them no network

Any suggestion team ?

[Formingus]

Reading information...
Using ADB mode...
Chipset: [msm8226]

Hardware: [qcom]

Serial no: [FA4AGSR00596]

Signed: [test-keys]

Android version: [4.4.4]

Device: [a11]

/sbin/sh: dumpsys: not found

Read information completed.