htc e8 s-off error [SOLVED]

[artoor32]

hi

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.30306251.15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.07.425.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HC56KWY01672
(bootloader) imei: 35723006*******
(bootloader) imei2: 35723006*******
(bootloader) meid: 00000000000000
(bootloader) product: mec_dugl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0PAJ20000
(bootloader) cidnum: HTC__059
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5c9466dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 11(ms)
Reading CID information
... (bootloader) cid: HTC__059
OKAY
Execution time is 😔ms)
Reading MEID information
... (bootloader) meid: 00000000000000
OKAY
Execution time is 2(ms)
Reading IMEI1 information
... (bootloader) imei: 357230062366499
OKAY
Execution time is 😔ms)
Reading IMEI2 information
... (bootloader) imei2: 357230062366507
OKAY
Execution time is 2(ms)
Reading secure flag information
... (bootloader) secure_flag: 3
OKAY
Execution time is 2(ms)
Reading serial number information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 2(ms)
Read information completed.

direct mode

Sending oem writesecureflag 0
... (bootloader) SecuritySDInit: counter = 2
(bootloader) mecdugl_init_sd, SD card already power on
(bootloader) [SPEW] GPIO 0 status is 0
(bootloader) sdhci_open: id=0
(bootloader) Initializing MMC host data structure and clock!
(bootloader) mmc slot#2 clock enabled
(bootloader) sdhci_set_clock: slot 2, freq 192000000
(bootloader) GPLL0 is enabled
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) sdhci_set_bus_width: bus width 0
(bootloader) sdhci_clk_supply: freq 400000
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) The response for CMD8 does not match the supplied value
(bootloader) Decoded CID fields:
(bootloader) Manufacturer ID: 7f
(bootloader) OEM ID: 0x0
(bootloader) Product Name: 5270
(bootloader) Product revision: 5.2
(bootloader) Product serial number: B4E
(bootloader) Manufacturing date: 2 2015
(bootloader) sdhci_clk_supply: freq 50000000
(bootloader) sdhci_set_bus_width: bus width 1
(bootloader) Done initialization of the card
(bootloader) erase_grpsize: -16777216
(bootloader) erase_grpmult: 261078040
(bootloader) wp_grpsize: 1
(bootloader) wp_grpen: 1
(bootloader) perm_wp: 0
(bootloader) temp_wp: 0
(bootloader) [SD_ERR] sd_read_sector: read sector failed (778135908 1)
(bootloader) [Tuxera][Error] Primary partition 0 (778135908/1141509631):
(bootloader) failed to read sector #778135908
(bootloader) [SD_ERR] sd_read_sector: read sector fai
Operation finished

can"t s-off plz help

[deepakgarg]

try sd mode method once

[artoor32]

Originally Posted by deepakgarg

try sd mode method once

ok with box repair.tnx